Get Driver information system Guide for Skoda Fabia 4 Door Third Generation (2014-2020)

50 Driver information system › Analogue instrument cluster

Selector lever positions of the automatic trans-

mission

Driver information system

Analogue instrument cluster

Overview

Menus, indicator lights

Outside temperature

- low outside temperature

Selected travel data storage

Overview of the instrument cluster display

1 - from the start

2 - long-term

3 - from refuelling

▶

Total distance travelled

Trip - Distance travelled after resetting the

memory

Notice messages

Fuel level indicator

Time

Tachometer with indicator lights

Display

Directional display

Gear engaged / gear

recommendation

Selector lever posi-

tions of the auto-

matic transmission

Menu, indicator

lights and informa-

tion

Speedometer with indicator lights

Bar with indicator lights

Multifunction button:

Set the time.

Reset ( trip ) odometer.

Display the distance travelled and the days un-

til the next service date.

▶

MAXI DOT display

Outside temperature

Coolant temperature display

Fuel level indicator

- low outside temperature

Total distance travelled

Trip - Distance travelled after resetting the

memory

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

Overview of the main menu items

▶

Driving data » page 51.

▶

Assistants - Activate / deactivate assistance sys-

tems.

Navigation - e.g. show driving recommendations,

compass, destination list.

Audio - Using radio and media.

Telephone - call list, accept or reject incoming call.

Vehicle - Vehicle condition » page 53.

▶

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

▶

Display overview

Depending on the equipment, the following informa-

tion is shown on the display.

▶

Operation

Operation via the control lever

Press - Switch be-

tween menu items /

set values

Hold - Display the

main menu

Press - Conﬁrm

Segment display

Time

menu item

Gear engaged / gear recommendation

Driver information system › Driving data 51

Operation via the multifunction steering wheel

Driving data

Turn - Switch be-

tween menu items /

set values

Press - Conﬁrm

menu item

Press - Return one

level higher in the

Overview

The driving data display works with the ignition

switched on.

In the instrument cluster display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

Hold - Display the

main menu

In Infotainment

Press - Show previous menu (if one was selec-

ted) / Show phone menu

Settings

Set language

The language is set in the following menu in the Info-

tainment system.

Reset the odometer

Travelled distance

Driving time

Brieﬂy press the button in the instrument

cluster.

›

Average speed

Setting the time

Average fuel consumption

Press and hold the button in the instru-

ment cluster until the menu item Time is

›

Driving economy evaluation - DriveGreen func-

tion (depending on the Infotainment

type) » page 105

displayed.

Release the button, the display shows the hour set-

ting.

›

Graphic fuel gauge - If the expected range is less

than 300 km, the vehicle slowly approaches the

symbol

Press the button repeatedly and set the hours.

Wait 4 seconds, the display shows the minute set-

ting.

›

Range

Press the button repeatedly and set the minutes.

Wait 4 seconds, the display shows the initial set-

ting.

›

Storage

The system saves the driving data in the following

memories.

The time is set in the Infotainment system in the fol-

lowing menu.

From start or "1" (depending on display type)

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

▶

Set the brightness of the instrument cluster light-

ing

The brightness of the instrument lighting is automat-

ically adjusted depending on the given lighting condi-

tions.

Long term or "2" (depending on display type)

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance are stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

When low beam is switched on, the brightness of

the instruments lighting can be adjusted in the fol-

lowing menu in the Infotainment system.

From refuelling or "3" (depending on display type)

Driving data from the last fuel tank are stored in

the memory. The memory is reset the next time

the tank is ﬁlled.

▶

Or:

52 Driver information system › Speed limit warning

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Operation

Display driving data in the display of the instru-

ment cluster via the operating lever

To select the memory

›

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

for the displayed driv-

ing data, press the set-

ting wheel A repeat-

edly.

Press - Select en-

try / set values

Press - Conﬁrm en-

try

To reset the memory,

hold the setting wheel

›

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

Select memory in infotainment

To select the memory, use the functional areas

in the following menu in the infotainment system.

Select the menu item for the driving data in the

›

main menu in the instrument cluster display.

Turn - Select entry /

set values

Press - Conﬁrm en-

try

Menu item for driving data

Or:

Menu item for driving data

Reset memory in infotainment

The memory is reset in the following menu in the in-

fotainment system.

Or:

Display drive data in the Infotainment

The driving data is displayed in the following menu in

the infotainment system.

Settings

Menu item for driving data

Or:

Select the driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu.

Menu item for driving data

Select and reset the memory for driving data in

the display of the instrument cluster using the

control lever

Or:

To select the memory

›

for the displayed driv-

ing data, press button

A repeatedly.

Set units

The units are set in the following Infotainment menu.

To reset the memory,

hold down the A but-

›

Or:

ton.

Speed limit warning

Usage

The system oﬀers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

Driver information system › Vehicle status 53

Malfunctions can also be displayed in infotainment.

Settings

As long as the malfunctions have not been rem-

edied, the warning messages are displayed again and

again. After the ﬁrst display of the message, only the

indicator lights remain on (Hazard) or (Warning)

is displayed.

Setting the speed limit

Select and conﬁrm the menu item Warning at or

(depending on display type).

›

When the vehicle is stationary, set the desired

speed limit and conﬁrm.

›

While driving, drive at the desired speed and con-

ﬁrm it as the speed limit.

›

Resetting the speed limit

Select and conﬁrm the menu item Warning at or

(depending on display type).

›

To reset the speed limit, conﬁrm the stored value.

›

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value remains

stored.

Vehicle status

Display

The vehicle status is displayed in the following menu

in the infotainment system.

Menu item for vehicle status

Or:

Menu item for vehicle status

Vehicle areas shown in colour indicate associ-

ated warning messages

No notiﬁcation

Warning messages regarding the vehicle con-

dition and their quantity

Display of information about the status of

the START-STOP system

▶

Activation / deactivation of the infor-

mation regarding the messages of the START-

STOP system in another screen display

Functionality

In the event of a system fault, messages relating to

the relevant fault are shown on the instrument clus-

ter display when the ignition is switched on.

Driver information system for Your Skoda Fabia 4 Door Third Generation (2014-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals