Get Infotainment Amundsen Guide for Skoda Fabia 4 Door Third Generation (2014-2020)

Infotainment Amundsen › Infotainment overview 71

Infotainment Amundsen

Infotainment overview

Grid display

A

Touchscreen

Control dial left

Press: Switch Infotainment on/oﬀ

Turn: Set volume

▶

List

Control dial right

Limitation

Press: Conﬁrm menu item

▶

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

Turn: select menu item/set value

▶

Radio menu

The Infotainment system indicates this by means of

a message in the screen.

Media menu

Phone menu

Voice control

Basic settings

Navigation menu

Setting basic functions

The following Infotainment functions are set in the

Route guidance traﬃc reports

Information about vehicle settings

Overview of Infotainment menus

menu.

Time and date.

Language.

Units.

▶

System

Restore factory settings.

Infotainment Menus

Sound settings

The Infotainment sound is set in the menu

.

MENU menu

The MENU menu contains all available Infotainment

menus.

The following menu items can be set.

Setting the equalizer.

Adjusting the volume ratio.

Volume adjustment of individual Infotainment

functions.

▶

To Display the menu tap

.

›

The graphic display type for the MENU menu can be

set.

Some are adjustable, for example the following

menu items.

▶

Volume adjustment of voice commands.

▶

Setting the maximum volume when Infotainment

is turned on.

▶

Speed-dependent volume setting.

Setting the Infotainment to mute with the park-

ing aid switched on.

72 Infotainment Amundsen › Screen

Depending on the equipment, the following ad-

vanced sound settings can be set.

Determine system version

Tap

System information

.

›

Setting space optimisation.

▶

Manual update

Information about available updates can be found on

the ŠKODA website.

Setting the audio proﬁles according to genre.

Adjusting the subwoofer volume.

http://go.skoda.eu/updateportal

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

The conﬁguration wizard is automatically displayed if

the ignition is switched on and if there are at least

two menu items that have not been set after switch-

ing on the Infotainment or if a new user account has

been selected.

Check for available updates.

Save the update to a USB source.

Insert the USB source into the front USB input.

Tap System information Tap Update software

Select the connected USB device as the update

source.

Go to the update ﬁle and conﬁrm the update.

Conﬁrm any messages and wait for the update

›

To switch oﬀ the automatic display, when the

conﬁguration wizard is displayed tap Don't show again

›

.

For manual display, tap

Conﬁguration wizard

.

›

Setting the MENU

The graphic display type for the MENU menu can be

set as follows.

process to complete.

Screen Menu:

Select one of the following menu items.

›

Screen

Grid display - Grid display.

▶

Overview

Horizont. Display - horizontal display.

▶

Safely disconnect the connected USB device

NOTICE

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows.

Tap

Remove safely:.

›

Select the desired device.

Disconnect/remove the device.

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

device.

A

B

Status bar

Bar with the functional surfaces of the displayed

menu

C

Other pages of the menu

Troubleshooting

Infotainment not responding

The Infotainment system must be restarted.

Operation

NOTICE

Danger of screen damage!

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

Press for more than 10 s.

Wait for the restart to complete.

›

▶

System update

In principle, operation by touch is identical to the op-

eration of a mobile phone.

We recommend having the system update carried

out by a specialist company.

The following operating modes are speciﬁc to the In-

fotainment system.

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

Infotainment Amundsen › Infotainment keyboard 73

Dragging up or down with two ﬁngers

Quickly review the list

Infotainment keyboard

Keypad overview

▶

of phone contacts.

The arrangement of the keypad characters depends

on the Infotainment language that has been set.

In Infotainment, the following types are used, de-

pending on the context.

Alphanumeric.

Numeric.

Keypad for input.

Keypad for search.

▶

Pulling apart with two ﬁngers

Enlarge image.

▶

Zoom in to the map.

Pulling together with two ﬁngers

Minimize image.

Zoom out of the map.

▶

Keypad example

A

Input line

▶

Delete characters before the cursor

Turn two ﬁngers

▶

Tap: delete the last character

Hold: delete all characters in sequence

Show list of searched entries

Rotate image.

▶

B

Keypad functional surfaces

▶

Change to lowercase

▶

Switch to the ﬁrst capital letter, followed by

lowercase letters

Finger movement

▶

/

Switch to the language keypad

Switch to the numeric and character key-

pad

▶

Move the map.

▶

Show additional keypad languages

Insert a space

Hold: Show additional character variants

Move cursor to the left

Move cursor to the right

Conﬁrm the characters that have been en-

tered

Settings

The following basic screen functions are set in the

Screen menu.

Brightness level of the screen.

Switch oﬀ the screen.

Display the time.

▶

Conﬁrmation sounds and animations.

74 Infotainment Amundsen › Voice control

Numeric keypad

Voice control

Functionality

Voice control principle

Voice control works according to the principle of

dialogue between the user and the Infotainment sys-

tem.

The user says a voice command. The Infotainment

system responds or executes the voice command.

Keypad example

Functional conditions

A

Input line

✓ Ignition is switched on.

✓ Infotainment is switched on.

✓ No telephone conversation can be held via Info-

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters

tainment.

B

Keypad functional surfaces

▶

Conﬁrm the characters that have been entered

Operation

If context-sensitive, alphanumeric characters can

be entered by holding a functional surface with a

digit.

Voice control process

To turn on voice control, press the button

on

›

the multifunction steering wheel.

Or:

Tap on

Operation

.

›

The Infotainment keypad is used to enter characters,

letters and numbers.

After switching on, the icon is displayed.

Say a voice command.

›

The keypad will be automatically displayed when In-

fotainment prompts for characters.

During recognition of the voice command, the icon

is displayed.

Find

The Infotainment system then executes the voice

command or plays the message. During the message,

the icon is displayed.

During the character input, a search for correspond-

ing entries takes place.

The entry to be searched can be entered, including

diacritics.

After the execution of the voice command, voice

control is switched oﬀ.

The keypad will only provide characters that match

the stored entries.

Correcting a voice command

During voice command input, press the

button

›

To display the searched entries, tap

.

›

on the multifunction steering wheel and say a new

voice command.

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

Stopping voice control

Stopping leaves more time for voice command input,

e.g. for searching for a phone contact.

Tap or repeatedly tap the ﬂag symbol until the

desired language keypad is displayed.

›

Move your ﬁnger up or down over the Infotain-

ment screen.

›

Further character variants

Press and hold the sign with the symbol

Select the desired symbol.

.

Or:

›

Say the “pause” voice command.

›

Resuming stopped voice control

Press the

wheel.

button on the multifunction steering

›

Setting up additional keyboard languages

Tap

Additional keypad languages

.

›

Or:

Tap on in the Infotainment screen.

›

Infotainment Amundsen › Radio 75

Stopping the played back message

Radio

Press the

wheel.

button on the multifunction steering

›

Overview

Ending voice control

Display menu

Press the

wheel twice.

button on the multifunction steering

Tap

.

›

Or:

Tap

Or:

.

›

Say the voice command “cancel” during voice com-

mand input.

›

Analogue and digital radio reception

Limitation

For some Infotainment languages, no voice control is

available. The Infotainment system will indicate this.

The messages are generated by the Infotainment

system. Flawless clarity (e.g. road or city name) can-

not always be guaranteed.

You cannot use voice control while a phone call is in

progress.

A Select frequency range

B Depending on the frequency range

FM: Radio text

DAB: Name of the station group

Settings

The following voice control functions are set in the

C Station buttons for preferred stations

List of available stations

menu

Voice control.

Conﬁrmation tones.

Display of sample commands.

▶

Manual station search

Display information about the station (applies to

DAB)

Self help

Settings

Starting acoustic help

Infotainment supports digital radio reception in

DAB and DAB+ formats.

If the Infotainment system is expecting a voice

command, say “Help”.

›

List of available stations

The “Help” voice command can be issued repeatedly

for further tips on voice control.

To display, tap

.

›

Played station

Station stored on the presets

A traﬃc radio station is set

DAB signal is not available

The DAB station reception is not stable

To ﬁlter the FM stations into alphabetical order,

tap according to group or genre.

The prerequisite for the ﬁltering option is ensur-

ing RDS and AF functions are activated.

Manual update of the station list

Activate/deactivate the display of example voice

commands in the Infotainment screen.

The system oﬀers the option of displaying example

voice commands after switching on the voice con-

trol in the Infotainment screen.

To turn on/oﬀ

commands (Infotainment system)

voice control tap on Example

›

.

Activate/deactivate display of example voice com-

mands in the instrument cluster display

The system oﬀers the option of displaying example

voice commands after switching on the voice con-

trol in the Instrument cluster screen.

In the FM station list, information about the pro-

gramme type and the type of the regional station

can be displayed.

To turn on/oﬀ

commands (Instrument cluster)

voice control tap on Example

›

.

76 Infotainment Amundsen › Radio

Save station to favourites from the list of available

stations

Applies to AM, FM and DAB frequency ranges.

Operation

Select station

Hold the line with the name of the desired station.

Tap the desired preset button.

›

Delete favourites

In the Radio main menu , tap

Delete presets.

›

To delete one preset button for preferred stations,

tap the desired station button and conﬁrm the de-

letion.

To delete all preset buttons for preferred stations,

tap All and conﬁrm the deletion.

›

Tap or at the top of the screen.

›

Buttons

SCAN function

Applies to AM, FM and DAB frequency ranges.

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

The variant for changing stations using buttons

in the Radio main menu is set as follows.

To start automatic play press

Scan or the right

›

In the Radio main menu, tap

Choose the change variant.

Arrow buttons:.

›

rotary control

To end automatic play press

control

.

or the right rotary

›

Traﬃc reception (TP) for FM stations on/oﬀ

Applies to the FM frequency range.

.

Find stations manually

In the Radio main menu, tap

To search in sequence, tap or next to the dis-

played frequency range scale.

In the Radio main menu, tap

Traﬃc program (TP).

›

.

›

Switch traﬃc reception for DAB stations on/oﬀ

Applies to the DAB frequency range.

Or:

Hold down the scroll mark on the frequency range

scale and move it to the desired value.

In the Radio main menu, turn on menu item

Traf-

›

ﬁc Radio (TP)

.

›

In the Radio main menu, tap

Advanced settings DAB

›

traﬃc programme announcements (TP) on/oﬀ.

Or:

Assign the station logo from an external source

Applies to AM, FM and DAB frequency ranges.

Turn the right rotary control

.

›

Infotainment oﬀers the option to assign logos from

the pictures on an external source to the station but-

tons.

Limitation

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Parking garages, tunnels, tall buildings or moun-

tains can restrict radio reception.

In the rear side windows, there may be antennas

for receiving the radio signal.

▶

For station logos, images in jpg, gif, png, bmp format

with a maximum resolution of 500x500 pixels can be

used.

In the main menu Radio tap on

Tap the desired station button.

Select the external source with the logo.

Find the desired logo and conﬁrm.

Station logos

.

›

Covering the windows with foils or metal-coated

stickers can impair the reception of the radio sig-

nal.

The information for updating station logos is taken

from the ŠKODA web pages.

The ŠKODA AUTO company does not assume any

responsibility for the availability, correct function

or broadcast information of the RDS service.

▶

http://go.skoda.eu/updateportal

Settings

Save the station currently being listened to as a fa-

vourite from the Radio main menu

Delete station logos

Applies to AM, FM and DAB frequency ranges.

Hold the desired station key for preferred stations

›

In the Radio main menu, tap

Station logos:.

›

until the station is stored.

Infotainment Amundsen › Radio 77

Switch RDS on/oﬀ

To delete a logo, tap the desired preset button and

conﬁrm the deletion.

To delete all logos, tap on All and conﬁrm the dele-

›

Applies to the FM frequency range.

The menu item is only available for some countries.

tion.

In the Radio main menu, tap

Advanced settings Radio

›

Activating / deactivating automatic station logo

assignment

Applies to the FM and DAB frequency ranges.

Data System (RDS)

.

If the RDS function is disabled, the following menu

items in FM station settings are not available.

When the function is switched on, a station logo

from the Infotainment memory is assigned when the

station is stored on a preset.

Traﬃc programme (TP).

Radio text.

RDS Regional.

Automatic frequency change (AF).

Regional station logo.

▶

In the Radio main menu, tap on

Advanced settings

›

Autostore station logos

.

Regional FM station logo

Applies to the FM frequency range.

Switch additional DAB announcements on/oﬀ

Applies to the DAB frequency range.

Infotainment provides the option of using country-

speciﬁc FM station logos.

When the function is switched on, other announce-

ments are received as traﬃc announcements. For ex-

ample, weather news, sports reports, ﬁnancial news,

etc.

In the Radio main menu, tap on

Advanced settings

›

Region for station logo:

.

Choose the country.

›

In the Radio main menu, tap on

Advanced settings

›

Other DAB announcements

.

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

Enable/disable automatic programme tracking of a

DAB station

Applies to the DAB frequency range.

When the function is switched on and station pre-

sets are displayed, detailed information about the

broadcast content of the FM station being listened

to, or the name of the station group for the DAB sta-

tion, is displayed.

When the function is switched on and the DAB sta-

tion is lost, Infotainment automatically changes to

the same station with a better signal in a diﬀerent

DAB station group.

In the Radio main menu, tap

Radio text.

›

In the Radio main menu, tap on

Advanced settings

Switch automatic frequency control (AF) on/oﬀ

Applies to the FM frequency range.

›

DAB - DAB station tracking

.

When the function is switched on and the signal of

the FM station currently being listened to is weak,

Infotainment automatically sets the same station to

a diﬀerent frequency with a better signal.

Turn on/oﬀ automatic switching from a DAB sta-

tion to the same FM station

Applies to the DAB frequency range.

When the function is switched on and the DAB sta-

tion being listened to is lost, Infotainment automati-

cally changes to the same FM station. The symbol

(FM) is displayed after the station name.

In the Radio main menu, tap on

Advanced settings

›

Automatic frequency control (AF)

.

Automatic change of frequency to a regionally

linked FM station

Applies to the FM frequency range.

When the corresponding DAB station can be re-

ceived again, the station automatically changes from

FM to DAB.

Infotainment provides the option of automatically

switching to a regionally linked FM station in case of

signal loss of the FM station being listened to.

In the main menu Radio tap on

Advanced settings

›

Automatic DAB - FM switching

.

In the Radio main menu, tap on

Advanced settings

›

Activating/deactivating reception of DAB trans-

mitter in the L band

RDS Regional:

.

In some countries, the DAB radio reception is only

available as a so-called LBand.

Select one of the following menu items.

›

▶

Fixed - If there is a loss of signal, another station

In the Radio main menu, tap

Advanced settings L-

must be set manually.

Automatic - automatic selection of the station with

›

Band:

.

▶

the best signal reception.

If there is no DAB radio reception available in the

L-band in your country, we recommend turning the

L-band reception oﬀ. The DAB channel scan is there-

fore faster.

If reception is lost in the given region, Infotainment

will automatically set another available region.

78 Infotainment Amundsen › Media

Tap: start playback

Tap: pause

Media

What you should be mindful of

Within 3 seconds of starting playback, tap: play

the previous song

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

After 3 seconds from the start of playback, tap

to play the current title from the beginning

Hold: fast rewind within the title

Tap: play the next song

Hold: fast forward within the title

Movement within the title is also possible by drag-

ging the ﬁnger over the timeline.

Extended operation

Turn repeat playback of the current track on/oﬀ

Turn repeat playback of the current album/fold-

er on/oﬀ

Turn random playback of the current album/

folder on/oﬀ

Overview

Display menu

Limitation

Tap

.

›

Or:

Tap

NOTICE

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

.

›

Settings

Turn title playback including subfolders on/oﬀ

In the Media main menu, tap on

Mix/Repeat including

›

subfolders

.

Traﬃc

To turn on/oﬀ the traﬃc monitoring during the

playback of media ﬁles, go to the Media main menu

›

A Select source

Manage ﬁles / multimedia database

Settings

and tap on

Traﬃc programme (TP).

Safely disconnect the connected device

NOTICE

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows.

Operation

Operation - Basics

In the main menu, tap Media

Select the desired device.

Disconnect/remove the device.

Remove safely:

.

›

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

device.

Bluetooth® player

Infotainment allows audio ﬁles of a connected Blue-

tooth® player to play using the A2DP and AVRCP au-

dio proﬁle.

A Album image / symbol of the connected source

Tap: display available albums

Infotainment Amundsen › Media 79

With Infotainment, multiple devices can be paired

using Bluetooth®, but only one of them can be used

as a Bluetooth® player.

USB device

To connect, insert the USB device into the appro-

›

priate port.

For connecting the Bluetooth® player, pair and

connect the device via Bluetooth®.

Use USB ports that support data transfer to play

audio ﬁles.

›

In the Media main menu , tap on

Bluetooth paired

›

To disconnect disconnect the USB device ﬁrst. To

›

devices

.

do so, in the main menu tap Media

Remove safely:

In the list, choose the device with the symbol

.

and select the USB device.

Disconnect the USB device.

If a device is connected to Infotainment using

Apple CarPlay or Android Auto, then it cannot be

connected using Bluetooth®.

A USB device can be connected directly to the

USB port or via a connection cable.

We recommend that you use extension cords from

ŠKODA original accessories.

USB extension cables or reducers can impair the

playback function of the connected device.

SD card

NOTICE

Risk of damaging the SD card reader!

Do not use SD cards with a broken slide for write

protection.

▶

Load USB audio source

After connecting the USB device, charging will start

automatically when the following conditions are met.

To insert the SD card,

with the bevelled cor-

ner to the bottom,

push into the slot in

the external module

until it snaps into place.

›

✓ The ignition is switched on.

✓ The USB device allows charging.

The charging eﬃciency can be diﬀerent compared to

the charging from the usual mains power supply.

To remove, ﬁrst dis-

connect the SD card

safely. To do so, in the

›

Depending on the type of the connected USB device

and the frequency of use, the charging current may

not be suﬃcient to charge the battery of the con-

nected device.

main menu tap Media

Remove safely: and se-

Some connected audio sources may not be recog-

nised and cannot be charged.

lect the SD card.

Press on the inserted SD memory card.

The SD card moves to the eject position.

NOTICE

›

When using an SD card with an adapter, vehicle vi-

brations might cause the card to fall out of the

adapter.

Supported sources and ﬁles

80 Infotainment Amundsen › Media

Supported sources

Source

Interface

Type

Speciﬁcation

File system

SD

SDHC

SD card

SD card reader

Standard size

SDXC

USB stick

HDD

(without special soft-

ware)

FAT16

FAT32

exFAT

NTFS

MSC

USB devices that use

the USB mass storage

support protocol

Devices running the An-

droid or Windows Phone

operating system that

support the Media

Transfer Protocol

Devices with an iOS op-

erating system

Bluetooth® protocols

A2DP and AVRCP (1.0 -

1.5)

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

MTP

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

The GPT standards (GUID partition table) method structured audio sources are not supported by Infotain-

ment.

Viewing images on the Infotainment screen is not supported by connected Apple devices.

Mobile device compatibility

It is possible to check the ŠKODA web pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code.

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio ﬁles

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

Mono, dual mono,

Stereo, Joint

Stereo

Mono,

Stereo, Joint

Stereo

MPEG 1 Layer 3

mp3

32 - 320

8 - 160

32, 44, 48

MPEG

WMA

MPEG 2 Layer 3

16, 22, 24

8, 11, 12

MPEG 2.5 Layer 3

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

Windows Media

Audio 10

8 - 384

8 - 320

8 - 768

8, 11, 12, 16,

22, 32, 44,

48

Mono, stereo,

Joint stereo

wma

32, 44, 48,

96

Infotainment Amundsen › Images 81

Compression for-

mat

Codec type

FLAC

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

8, 11, 12, 16,

22, 24, 32,

44, 48, 64,

88, 96

deﬁned by the

format

Approx. 5.5 Mbps

Mono, stereo,

5.1, 7.1

FLAC

OGG-Vorbis

ADTS

ﬂac

ogg

aac

deﬁned by the 8, 11, 12, 16,

format

Approx. 5.5 Mbps

Mono,

Stereo

OGC-Vorbis

AAC LC

22, 24, 32,

44, 48

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

Mono,

Stereo

16 - 400

AAC HE

AAC HEv2

Mono,

Stereo

RIFF

WAV

wav

64 - 3072

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported playlists

Codec type

File extension

M3U

M3U8

PLS

m3u

m3u8

pls

WPL

ASX

wpl

asx

PLA

pls

Operation

Images

Touch operation

Overview

Display menu

Tap

.

›

A View images

▶

Show the next image

▶

Show the previous image

Start slideshow

A Select source

Manage ﬁles

Settings

Stop slideshow

B View image

▶

Turn left

▶

Turn right

▶

Show in output size

Guidance for GPS coordinates

82 Infotainment Amundsen › Media Command

The functional area is displayed if the image con-

tains information about GPS.

Settings

The following Infotainment functions are set in the

menu.

Gesture control

Display image size.

Display image duration during the slideshow.

Slideshow repeat.

▶

Show the next image.

▶

Supported sources and ﬁles

Supported sources

Source

Interface

Speciﬁca- File system

tion

Standard

size

Show the previous im-

age.

SD card

reader

SD card

SD

SDHC

SDXC

FAT16

FAT32

exFAT

NTFS

USB 1.x; 2.x USB stick

3.x

or higher

with USB

HDD

(without

special

USB

2.x support software)

Supported ﬁles

Zoom in.

Codec type

File extension Max. resolution

[Mpx]

BMP

JPG; JPEG

bmp

4

jpg; jpeg

4 (Progressive

Mode)

64

4

GIF

PNG

gif

png

4

The maximum supported image size is 20 MB.

Zoom out.

Media Command

Functionality

The Media Commandfunction allows playback of au-

dio ﬁles or videos in up to two tablets that are con-

nected to Infotainment via Wi-Fi, to control Infotain-

ment.

Maximize image / dis-

play original image size.

Overview

Display menu

Tap

.

›

Infotainment Amundsen › Media Command 83

If two tablets are connected, the title playback starts

in the two tablets at the same time.

Playback control

Tap: Start playback

Tap: Pause

Within 3 seconds of starting playback, tap:

play the previous song

After 3 seconds, tap from the start of play-

back: to play the current title from the beginning

Tap: play the next song

Menu for a tablet

Increase the audio volume of the tablet

Decrease the audio volume of the tablet

View control options for two tablets

View control options for a tablet

Mute the tablet

Unmute the tablet

Movement within the title is also possible by drag-

ging a ﬁnger over the timeline.

Functional limitation

Menu for two tablets

Choice of connected tablet

Settings

Some tablet types allow playback of audio ﬁles or

videos by an inserted SD card in the tablet. Playback

of these tracks may be limited.

If several devices are connected to the Infotainment

system by means of Wi-Fi, there is the danger of Wi-

Fi overloading and thus also the inability of Media

Command to function properly.

Functional conditions

✓ Data transfer of Infotainment is switched on.

Switching the transmission on/oﬀ takes place in

High-deﬁnition video playback may cause playback

problems or problems connecting the tablets to the

Infotainment system.

the

Data transmission mobile devices Enable data

transfer for ŠKODA apps menu item.

✓ Infotainment operation via the application is ena-

bled.

Settings

The adjustment of the operation takes place in

the

Data transmission mobile devices Operation

Application ŠKODA Media Command

through apps: menu item.

The application can be downloaded to the mobile de-

vice after reading the following QR code or by refer-

ring to the website with information about the mo-

bile applications ŠKODA.

One of the following menu items can be selected.

▶

Deactivate - the operation is deactivated.

▶

Conﬁrm - Operation requires conﬁrmation at the

start of the application.

Allow - the operation requires no conﬁrmation.

http://go.skoda.eu/service-app

▶

✓ In the tablet(s), the ŠKODA Media Command ap-

plication is installed.

✓ The tablet(s) are connected to the Infotainment

hotspot.

Connect tablet with Infotainment hotspot

Turn on the ignition.

Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

›

Operation

Wi-Fi Mobile Hotspot Mobile Hotspot.

Turn on Wi-Fi on the tablet.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

›

Start playback

For selection of the playback source in the main

›

menu, tap and select the source tablet.

For playback select the category and then the title.

›

The name of the Infotainment hotspot refers to

the menu item

Wi-Fi Mobile Hotspot Hotspot

Settings (Wi-Fi) SSID:

.

84 Infotainment Amundsen › Mobile device management

Select the Infotainment hotspot and enter the re-

quired password.

Conﬁrm the connection.

In the tablet, start the application ŠKODA Media

Command.

›

The password for connecting to the Infotainment

hotspot is taken from the menu item

Wi-

Fi Mobile Hotspot Hotspot Settings (Wi-Fi) Network key:

.

Supported ﬁles

Format

Codec type

Android operating system

iOS operating system

MPEG-4 Part 2

Video

MPEG-4 Part 10 (H264)

Xvid

MPEG-1; 2 and 2.5 Layer 3 (mp3)

aac

m4a

ogg

ﬂac

(4,1+)

Audio

wav

(4,1+)

Mobile device management

Overview

Mobile device management

In the Telephone main menu , tap on the functional surface

Bluetooth paired devices.

›

In the list of paired mobile devices, the following symbols may appear for the individual devices.

Grey icon - the device can be connected as a telephone.

Green icon - the device is connected as a telephone.

Grey icon - the device can be connected as a Bluetooth® player.

White icon - the device is connected as a Bluetooth® player.

Possible functions of the connected mobile device

The functions of a device connected via over the HFP Bluetooth proﬁle depends on the following connection

types.

First device

Main phone

Second device

Additional phone

incoming / outgoing calls

SMS

Telephone contacts

Bluetooth® player

incoming calls

Bluetooth® player

With Infotainment only a mobile device can be connected as a Bluetooth® player.

Infotainment Amundsen › Mobile device management 85

Information about the ŠKODA applications

Detailed information on the ŠKODA applications can

be found on the website after reading the following

QR code or using the link.

Mobile device and application limitations

Availability of features

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

http://go.skoda.eu/mobile-apps

Connection restrictions

With Infotainment, a max. of 20 mobile devices are

paired.

▶

The range of the connection of the mobile device

to Infotainment is limited to the passenger com-

partment.

▶

Connection set-up

After reaching the maximum number, the pairing

of the next mobile device will replace that of the

device that has not been used for the longest peri-

od of time.

▶

Connect a mobile device to Infotainment

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Bluetooth® on Infotainment

›

Mobile device compatibility

Bluetooth Bluetooth

.

It is possible to check the ŠKODA web pages to see

if Infotainment is compatible with the selected mo-

bile device being tested. This check is carried out by

using the following reference or by reading the QR

code.

Turn on the Bluetooth® visibility of the Infotain-

›

ment

Bluetooth Visibility: Visible.

Find available Bluetooth® devices in the mobile de-

vice.

Select the Infotainment Bluetooth® unit.

http://go.skoda.eu/compatibility

The name of the unit can be found by tapping

Bluetooth Name:

.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

The mobile device is connected to the Infotainment

or just paired, depending on the number of devices

that are already connected.

All information given is incidental and serves as in-

formation.

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

Connect Infotainment to a non-paired mobile de-

vice

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Bluetooth® on Infotainment

›

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

›

Bluetooth Bluetooth

.

Tap on

Bluetooth Search for devices.

›

Ensure the visibility of the device to be connected.

Select the desired device from the list of Blue-

tooth® devices.

Applications in mobile devices

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

Due to the variety of applications, as well as their on-

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Connect Infotainment to an already paired mobile

device

The connection with an already paired mobile device

is made automatically after switching on the ignition;

if necessary the device can be connected manually

as follows.

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Infotainment Bluetooth®

›

Bluetooth Bluetooth

.

86 Infotainment Amundsen › Telephone

Bluetooth Paired devices

In the device list, select the desired device and the

Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

.

›

Contact list

Text messages

Call lists

›

Settings

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

Conditions for connecting a telephone with

Infotainment

Disconnect from a mobile device

Tap

Bluetooth Paired devices.

›

✓ The ignition is switched on.

✓ The Bluetooth® function of the Infotainment and

Tap on the Bluetooth® proﬁle icon of the desired

mobile device.

the telephone needs to be switched on.

Delete a paired mobile device

The Bluetooth® function of the Infotainment is

switched on in the menu item

Tap

Bluetooth Paired devices.

›

Bluetooth

To delete a mobile device, tap and conﬁrm the

deletion.

Bluetooth

.

✓ Visibility of the Infotainment is switched on.

To delete all mobile devices, tap on Delete all and con-

ﬁrm the deletion.

›

The visibility of the Infotainment is switched on in

the menu item

Bluetooth Visibility:

.

Visible.

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

Telephone

Overview

✓ Through Infotainment, no mobile device can be

Display menu

connected using Apple CarPlay.

Tap

.

›

Or:

Tap

Telephone operation

Enter telephone number

.

›

If the menu Telephone is not displayed, check

whether the mobile device is connected.

In the Telephone main menu, tap

.

›

Enter the telephone number using the numeric

keypad that is displayed.

›

The displayed numeric keypad can also be used

for searching for contacts.

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

A Name of the connected phone

To display the contact list in the telephone main

›

Tap: View the list of previously connected

▶

menu, tap

.

phones

To ﬁnd details within the list, tap Find

Enter the details you wish to ﬁnd.

.

›

B Station buttons for preferred contacts

C Select storage group of the preferred contacts

D Name of the telephone service provider

To establish a connection with a contact, tap the

functional area showing the desired contact.

▶

If the symbol is displayed in front of the name,

If a contact has multiple telephone numbers, select

the telephone number from the displayed list.

roaming is active.

E Symbol for the connection type

F Status symbols of the phone

To display the details for a contact, tap

.

›

Establish a connection to the voice mailbox num-

ber

In the Telephone main menu, tap

Change the main phone to the extension tele-

phone

.

›

Enter the phone number

Infotainment Amundsen › Telephone 87

Telephone conversation

Depending on the context of the telephone conver-

sation, the following functions can be selected.

Tap on

.

›

Display received text messages

In the Telephone main menu, tap

To display the Message, select the desired mes-

sage.

E-mails

.

›

End connection / reject incoming call / end call

Answer an incoming call / return to the held call

Switch the ringer oﬀ / on

/

The message content and the following menu with

functions is displayed.

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

Set up a conference call

/

Read the text message using the generated Info-

tainment voice.

To switch the call tone from the speakers to the

telephone, go to the telephone main menu and tap

›

Display the menu with the following functions

of an accepted message.

Option to answer the message by means of a

template.

on

To switch the call tone from the telephone to the

speakers, tap

hands-free.

Delete message.

.

Recognise phone numbers in the message.

Forward message, with the option to edit the

message before sending.

Conference call

A conference call is a joint telephone conversation

with a minimum of three and a maximum of six par-

ticipants.

Reply to the sender by sending a message.

Make the next call during an ongoing conversation/

conference.

›

Settings of the Infotainment telephone

functions

Or:

Manage preset buttons for preferred contacts

Accept a new incoming call by tapping the function

›

To save the desired preset button, press and hold.

Select a contact from the displayed list.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

›

area

.

›

To start a conference call, tap on the functional

›

area

.

During an ongoing conference call, the following

functions can be selected depending on the context.

To delete tap on Telephone

vourites in the main menu.

User proﬁle Manage fa-

›

Hold the conference call and leave temporarily

(the conference will continue in the background)

Return to the conference being held

To delete one preset, tap on the list entry and con-

ﬁrm the deletion.

Switch the microphone oﬀ / on

End the conference

Show details of the conference call

/

Or:

To delete all presets, tap on Delete all and conﬁrm the

›

deletion.

In the details of the conference call, depending on

the connected telephone, the following functions

can be selected.

Import telephone contacts

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

Show details of the conference call participants

End conversation with the conference call par-

ticipant

Conversation with a participant outside of the

conference call

Infotainment can import up to 2000 telephone con-

tacts together with contact pictures. Each contact

can include max. 5 telephone numbers.

Depending on the type of telephone, import conﬁr-

mation may be required.

Send a text message

In the Telephone main menu, tap

New text mes-

›

sage

.

Update telephone contacts

Write a text message and conﬁrm; a view of the

message is displayed.

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

›

The message can be edited when the text area

within the view is tapped.

For a manual update of the list in the telephone

›

main menu, tap on

User proﬁle Import contacts

.

Consult or select the recipient of the message, if

necessary tap to enter the phone number.

Add more recipients or conﬁrm selected recipi-

›

Show pictures on phone contacts

In the Telephone main menu, tap

User proﬁle Show

›

pictures for contacts

.

ents.

88 Infotainment Amundsen › Wi-Fi

Sort contacts in the phone book

The Wi-Fi signal from the hotspot is not available

In the Telephone main menu, tap on

User proﬁle

›

Sort by:

.

Select the type by which to sort.

›

Functional restriction

Ringer

The Infotainment system can only be connected to a

hotspot with WPA2 access protection.

Some phones do not allow the use of the telephone

ringtone; instead, the Infotainment ringtone is used.

To set the Infotainment ringer in the Telephone

›

Settings

main menu, tap on

User proﬁle Select ringtone.

Select the ringtone.

›

Connect a mobile device to the Infotainment hot-

spot

Number for the voice mailbox

To set the voice mailbox number in the Telephone

main menu, tap on

Enter the number of the voice mailbox.

Turn on the ignition.

Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

›

User proﬁle Mailbox number:.

Wi-Fi Mobile Hotspot Mobile Hotspot.

›

Turn on the Wi-Fi on the mobile device.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

›

Conference calls

To enable/disable the option for conference call

setup in the phone main menu, tap

›

conference.

The name of the Infotainment hotspot refers to

the menu item

Wi-Fi Mobile Hotspot Hotspot

Settings (Wi-Fi) SSID:

.

Wi-Fi

Select the Infotainment hotspot and enter the re-

quired password.

›

Functionality

The password for connecting to the Infotainment

Wi-Fi can be used to connect to the Internet or for

operating the Infotainment system using an applica-

tion in the connected device (e.g. ŠKODA Media

Command).

hotspot is taken from the menu item

Wi-

Fi Mobile Hotspot Hotspot Settings (Wi-Fi) Network key:

Conﬁrm the connection.

The Infotainment hotspot can connect up to 8 mo-

bile devices. The Infotainment can be connected to

another hotspot simultaneously.

Connect Infotainment to the mobile device hot-

spot

Turn on the ignition.

›

Turn on the Infotainment’s Wi-Fi unit in the menu

item

Wi-Fi Wi-Fi: Wi-Fi.

Overview of available hotspots

Show available hotspots

Select the desired hotspot in the list of available

hotspots.

Enter the password for connecting to mobile devi-

ces.

›

Wi-Fi Wi-Fi

.

›

Infotainment stores passwords for previously

connected hotspots.

Security level of the Infotainment hotspot

The security level is set at WPA2 and cannot be

changed.

Change the name of the Infotainment hotspot

Tap

SSID:

Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)

›

.

A Previously connected hotspots

B Available hotspots

Enter the name and conﬁrm.

›

Tap Save

.

C The hotspot supports the WPS connection

D Update the list of available hotspots

Currently connected hotspot

Change password for connection to Infotainment

hotspot

The password must be a minimum of 8 and a maxi-

mum of 63 characters.

Delete information about the hotspot connection

Wi-Fi signal strength of the hotspot

Tap

Network key:

Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)

›

.

Enter the password and conﬁrm.

Infotainment Amundsen › Data connection 89

Tap Save

.

Types of data connection setup

›

By connecting the Infotainment with the external

hotspot via Wi-Fi.

▶

Quick connection of a mobile device to the Info-

tainment hotspot

Turn on the ignition.

Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

Tap WPS quick connection (WPS button)

In the mobile device, switch on the option for con-

nection via WPS.

Using the USB device CarStick.

▶

›

Connecting using the USB device CarStick

The CarStick USB device can be purchased from the

ŠKODA original accessories.

Wi-Fi Mobile Hotspot Mobile Hotspot

.

›

Insert a SIM card with activated data services into

the CarStick.

›

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

The required size of the SIM card and the correct

procedure when inserting can be found in the in-

structions enclosed with the CarStick device.

Turn on the ignition and switch on Infotainment.

Insert the CarStick into the USB input at the front.

Wait approximately one minute until a light other

than the red indicator light on CarStick is perma-

nently lit.

Quick connection of Infotainment to the mobile

device hotspot

Turn on the ignition.

On the mobile device, turn on the hotspot, its visi-

bility, and the option for WPS connection.

›

Turn on the Infotainment’s Wi-Fi unit in the menu

›

item

Wi-Fi Wi-Fi: Wi-Fi

.

When the red indicator light illuminates, remove

the CarStick and insert again.

If the SIM card is protected by a PIN code, then the

Tap WPS quick connection (WPS button)

.

›

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

PIN code of the SIM card must be entered.

Conﬁrm the entered PIN code by tapping

.

›

Manual connection of Infotainment to the mobile

device hotspot

Or:

Set the hotspot backup of the mobile device to

WPA2.

Turn on the ignition.

Turn on the Infotainment’s Wi-Fi unit in the menu

›

Tap to save and conﬁrm the PIN code.

If necessary, set the required network of the data

service provider.

›

NOTICE

item

Wi-Fi Wi-Fi: Wi-Fi.

If a SIM card is incorrectly sized or if a SIM card is in-

serted in the wrong direction, there is a risk of dam-

age to the CarStick USB device.

Tap Manual settings

.

›

Enter the name of the hotspot to connect to and

the access password.

Set network parameters

Tap Connect

.

›

Tap network

.

›

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

Set the desired parameters.

Contact the data service provider for precise pa-

rameters for the network setting.

Tips for a perfect connection

Keep only the hotspot to be connected switched

on and switch oﬀ the other hotspots.

Delete unused hotspots. This shortens the time re-

quired to establish a connection.

For some hotspots, the connection takes longer, so

wait for the connection to ﬁnish.

If the connection is interrupted, recheck the availa-

ble hotspots and repeat the connection.

▶

SmartLink

Functionality

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

Data connection

Settings

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

Mobile data

Mobile devices can be connected via a USB cable.

Mobile data for the data connection may be sub-

ject to charges according to the mobile network

operator's tariﬀ conditions.

Supported connection types

SmartLink supports the following connection types.

Android Auto.

▶

90 Infotainment Amundsen › SmartLink

Apple CarPlay.

MirrorLink.

Tap: Return to the Apple CarPlay main menu

Hold: Turn on voice control (Siri)

▶

MirrorLink

Overview of the SmartLink connection

Display menu

Tap

.

›

Or:

Tap

.

›

It is not possible to operate the application while

driving

Return to the SmartLink main menu

List of running applications

Display the last running application in the connec-

ted mobile device

A Previously connected device

B Currently connection device

Settings

Display information about SmartLink

Disconnection of the active connection

Settings in SmartLink menu

Connection conditions

General connection conditions

✓ The mobile device supports the following Smar-

tLink connection types: Android Auto. Apple Car-

Play and MirrorLink.

Android Auto

✓ Mobile devices, as well as the type of Smar-

tLinkconnection, are supported in the respective

market.

✓ Some connected mobile devices require the mo-

bile device to be “unlocked”.

Conditions for Android Auto

✓ The device to be connected must have Android

AutoSupport.

A list of devices, supported regions and applica-

tions that the Android Auto connection supports

can be found on the websites of Google Inc..

Overview of running applications, phone calls, re-

ceived text messages and the like.

✓ The Android Auto application needs to be instal-

Switching on voice control (Google Voice)

led on the mobile device.

Apple CarPlay

✓ Some applications require the data connection in

the mobile device to be turned on.

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlaySupport.

A list of devices, supported regions and applica-

tions that the Apple CarPlay connection supports

can be found on the websites of Apple Inc..

✓ Siri voice control is on.

✓ The data connection is switched on in the mobile

device.

A

B

List of available applications

Depending on the duration of operation:

Infotainment Amundsen › SmartLink 91

Conditions for MirrorLink

✓ The device to be connected must have Mirror-

LinkSupport.

For the duration of the connection, no Bluetooth®

devices can be connected to the Infotainment sys-

tem.

▶

If route guidance is taking place at this moment in

Infotainment, then there is the option to start the

route guidance in the Apple CarPlay application.

And vice versa, if route guidance is currently taking

place in the Apple CarPlay application, then there is

the possibility that this will be terminated by the

start of route guidance by the Infotainment sys-

tem.

A list of devices and applications that the Mirror-

Link connection supports can be found on the

websites of Car Connectivity Consorcium®.

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

Functionality restriction of Infotainment with an

MirrorLink connection

Operation

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

If you wish to use the device to be connected in

the Telephone menu, the device must be paired

with and connected to the Infotainment system by

Bluetooth® before establishing the MirrorLink con-

nection.

▶

Operation of the running MirrorLink application

To display the following operation surfaces, press

›

the right rotary control

.

▶

Display of control surfaces at the bottom

Display of control surfaces at the top

Return to the MirrorLink main menu

Limitation

Settings

Restriction of SmartLink applications while driving

For safety reasons, operation of some SmartLinkap-

plications while driving is not possible or is restric-

ted.

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Functionality restriction of Infotainment with an

Android Auto connection

›

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Choose to connect via Apple CarPlay.

›

Apple CarPlay – Disconnection

In the Apple CarPlay main menu, tap on the “ŠKO-

DA” functional area.

›

▶

Tap on

.

›

Android Auto - Connection via USB

For the duration of the connection, no other Blue-

tooth® devices can be connected to the Infotain-

ment system.

▶

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

If route guidance is taking place at this moment in

Infotainment, then there is the option to start the

route guidance in the Android Auto application.

And vice versa, if route guidance is currently taking

place in the Android Auto application, then there is

the possibility that this will be terminated by the

start of route guidance by the Infotainment sys-

tem.

Choose to connect via Android Auto.

›

Android Auto - Disconnection

In the main menu of Android Auto

turn to ŠKODA”.

tap on “Re-

›

Tap on

.

›

MirrorLink - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

Functionality restriction of Infotainment with an

Apple CarPlay connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

Connecting the device disconnects all currently

connected Bluetooth® devices.

›

▶

›

Choose to connect through MirrorLink.

›

▶

MirrorLink - Disconnection

In the MirrorLink main menu, tap

.

›

92 Infotainment Amundsen › Navigation

Tap on

.

›

Display the following menu depending on the

context

There is no route guidance - search / enter a

new destination

Route guidance is ongoing

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

Tap on

.

›

Show route plan.

▶

Select the desired device or connection type.

Set traﬃc obstruction manually.

Search / enter destination.

End route guidance.

Navigation

Show the following menu

Navigation announcements

Save current vehicle position as a ﬂag target.

Show list of saved routes.

Show list of saved destinations.

Show list of recent destinations.

Route guidance to home address.

▶

Infotainment is guided by means of graphic driving

recommendations and navigation announcements.

The navigation announcements are generated by the

Infotainment system. It cannot be guaranteed that

the announcements will always be understood, e.g.

street or city names.

POI search

Map display settings

Display for navigation announcement

Settings

Repeat the last navigation announcement

Tap

.

›

Switch oﬀ navigation announcements

Tap

.

›

Symbols shown on the map

Destination position

Set navigation announcements

Intermediate destination position

Location of home address

Favourite position

In main menu Navigation, tap

Navigation announce-

›

ments

.

Map display options

Navigation overviews

Display menu

Tap

.

›

Or:

Tap

.

›

Map overview

A

Automatic map display in day / night mode, de-

pending on the vehicle lighting currently switch-

ed on

B

C

D

E

Daytime map display

Night-time map display

Enable/disable the additional window display.

A Vehicle position

B Route

Switching the display of selected POI categories

on / oﬀ

C Functional surface for the operation of the map

display

D Functional surface of the POI

E Functional surface of the POI list

F Road signs for the aﬀected section of the route

G Information on the maximum permitted speed

Infotainment Amundsen › Navigation 93

North-facing map

Map scale

The symbol rotates the vehicle position, the map

and the Polarstern Symbol do not rotate.

Map oriented to the direction of travel

The map as well as the Polarstern symbol rotate,

the symbol showing the vehicle position does not

rotate.

With a map scale greater than 10 km, the map is

automatically oriented towards north.

Map centring

The moved map can be centred/aligned to the vehi-

cle, destination or route position.

It is possible to change the map scale manually or to

switch on the automatic scale change.

To display the control surfaces to change the map

›

To centre the map, tap

.

›

scale, tap A .

Search for a new destination

Tap

Types of manual scaling

.

›

Touch the screen with two ﬁngers and pull them

›

apart or close them together.

Or:

Rotate the controller

.

›

Switching the automatic scale change on / oﬀ

If the automatic scale is active, the map scale

changes automatically, depending on the type of

road you are driving and the manoeuvre you are

about to perform.

The automatic scale is only active as long as the map

is centred on the vehicle position.

A

Input line

B

The following icons are displayed depending on

the search mode

To turn on navigation in the main menu, tap

.

›

The functional surface

is highlighted in green.

▶

- Map display and the list of the destinations

To turn oﬀ navigation in the main menu, tap

.

›

visited in the navigation database

▶

- Map display and the list of destinations vis-

The functional area

is shown in white.

ited online

The turning oﬀ occurs likewise when the map is

moved or the map scale is changed manually.

C

D

- Select the destination search/destination en-

try

Context-dependent display of the destination

list

Map view in reduced scale

The map scale is reduced for a few seconds and then

restored.

List of recent destinations.

List of destinations visited.

▶

To display tap

.

›

Map orientation

Select the destination you are looking for

Enter the information for the destination search.

Select the desired destination.

›

Destination details are displayed with the option of

starting route guidance.

Enter a new destination via the address

Tap

.

›

A menu will appear with the destination input op-

tions.

Select the destination entry via address.

Enter the required information.

›

› ^{To change the map orientation, tap}A .

The map can be aligned as follows.

94 Infotainment Amundsen › Navigation

Destination details are displayed with the option of

starting route guidance.

Route calculation is done on the basis of the set

route options.

Tap Route options

Select the desired list entries.

.

›

Enter a new destination via the map point

Tap

.

›

If the selection of the alternative routes is activated,

the following menu is displayed after the calculating

a new route.

A menu will appear with the destination input op-

tions.

Select the destination via the map point.

Touch the screen to move the desired destination

into the cross-hair.

›

To activate/deactivate alternative routes, go to

›

the main menu Navigation

Tap Route options Suggest

3 alternative routes

.

Or:

Economical route with the shortest possible

travel time and the shortest route - the route is

highlighted in green.

Calculate the fastest route to the destination,

even if a detour is necessary - the route is

highlighted in red.

Set the GPS coordinates.

Conﬁrm the destination entry.

›

Destination details are displayed with the option of

starting route guidance.

List of saved destinations

Calculate the shortest route to the destination,

even if a longer travelling time is required - the

route is highlighted in orange.

Destinations

.

›

Infotainment tries to allow for continued route guid-

ance even if the navigation data is incomplete or

there is no data at all for the given area.

The route is recalculated if you ignore driving recom-

mendations or change the route.

The navigation announcements provided may vary

from the actual situations, e.g. due to out-of-date

navigation data.

A

Select the category of the saved destinations

▶

Route overview

During route guidance the display of a route over-

view is possible.

- Saved destinations

- Flag destination

▶

Vehicle position at the time of storing ﬂag

destination.

Route details

.

›

▶

Swap route destinations with each other

- saved destinations

- Favourite

If the route contains intermediate destinations, there

is the option to exchange them with each other in

the route overview and thus change their order, add

other destinations or delete destinations.

▶

- Favourites

- Phone contact destinations

- online destinations set up in the ŠKODA

In order to change the order of the destination,

hold the functional area until the destination be-

comes free.

›

Connect Portal or in the application ŠKODA

Connect

Move the destination to the desired position and

release the functional surface.

›

Selecting the stored destination

Select the category of the saved destinations.

Select the desired destination.

›

The route is re-calculated.

List of traﬃc reports

Destination details are displayed with the option of

starting route guidance.

Infotainment enables reception of traﬃc reports

containing information about traﬃc obstructions us-

ing TMC (Traﬃc Message Channel) or online via the

online service Infotainment Online.

Selecting destination by tapping the map point

Tap the desired item or the POI icon in the map.

Tap to start the route guidance.

›

The list of traﬃc reports will be updated by Infotain-

ment on a continuous basis.

Route calculation

A route is created by starting route guidance to a

destination.

To display traﬃc reports tap

.

›

Additional stopovers can be added to the route.

Infotainment Amundsen › Navigation 95

Enter destination by tapping the map item

A

B

C

List of traﬃc reports

Filtering traﬃc reports

Zoom into the map

Symbol for the source of the traﬃc message

If there is no route guidance, the traﬃc obstruction

is shown on the map by a red line.

If route guidance takes place, the traﬃc obstruction

is shown as follows.

Grey line - The traﬃc obstruction is not on the

route

Red line - The traﬃc obstruction is on the route,

the route will not be recalculated and the route

passes through the traﬃc obstruction

▶

Zoom out of the map

Orange line - The traﬃc obstruction is on the

route, the route is recalculated and an alternative

route is available

▶

To turn traﬃc ﬂow indicator on / oﬀ in the main

›

menu navigation, tap

Map Traﬃc ﬂow settings

.

NOTICE

ŠKODA AUTO assumes no responsibility for the

availability, content, currency or evaluation of TMC

traﬃc reports or other data provided by third parties.

ŠKODA AUTO is not entitled to examine or adapt

this data in any way. The data can only be edited by

Infotainment in areas where it is available.

Limitation

Infotainment may give incorrect driving recommen-

dations if the road conditions or the traﬃc do not

match the navigation data.

Touch operation

Move map

This can lead to the route guidance being carried out

using a diﬀerent route or proposing a change of di-

rection in a one-way street.

Settings

Avoiding traﬃc obstructions

If the function is switched on and the Infotainment

receives information about a traﬃc obstruction on

the route from online traﬃc information or the TP

traﬃc announcements, the route is recalculated.

For switching on/oﬀ the function in the main

›

menu, tap Nvigation

Route options Dynamic route.

96 Infotainment Amundsen › Navigation

Showing arrival time information in the destina-

tion / driving time

The status line displays information on the time de-

pending on the following setting.

In main menu Navigation, tap

Map Show POIs

›

Select categories for POIs

.

Set preferred categories.

Set home address

In the navigation main menu, tap

Advanced settings

›

The deﬁned destination of the home address is dis-

played in the overview of recommended destina-

tions.

Time display:

.

Showing information on the destination / waypoint

The status line displays information on the distance

and travel time to the destination, depending on the

following time setting.

Tap Home address

.

›

Deﬁne the home address using the current vehicle

position or enter the address.

In the navigation main menu, tap

Advanced settings

›

Switching demo mode on / oﬀ

status display:

.

In demo mode, the route guidance from the starting

point of the demo mode to the selected destination

is simulated.

Switching display of country-speciﬁc speed limits

on / oﬀ

When the function is switched on, the country-spe-

ciﬁc speed limits are displayed when crossing nation-

al borders.

When the function is switched on, Infotainment is-

sues a query before the start of route guidance as to

whether the route guidance should be carried out in

the normal way or in demo mode.

In the navigation main menu, tap

Advanced settings

›

Note: Country border crossed

.

To switch on/oﬀ in the main menu Navigation, tap

›

Advanced settings Demo mode

.

Or:

In the navigation main menu, tap

Advanced settings

Deﬁning the starting point of the demo mode

›

Note: Country border crossed

.

In main menu Navigation, tap

Demo mode Deﬁne demo mode starting point

Advanced settings

›

.

For display of speed limits in the main menu, tap

Navigation

Top speed

.

Or:

Hold down the desired point on the map and select

Switching the display of road signs on motorways

and expressways on / oﬀ

›

menu item Deﬁne demo mode starting point

.

When the function is switched on, Infotainment dis-

plays traﬃc and information signs on motorways and

expressways.

Updating the navigation database

In the navigation main menu, tap

Map Show traﬃc

›

Information on updating the navigation database

must be requested from a ŠKODA partner, or refer

to the following ŠKODA websites.

sign.

Switching the fuel warning on / oﬀ

When the function is switched on and the fuel sup-

ply reaches the reserve area, a warning message ap-

pears with the option of going to the nearest petrol

station.

http://go.skoda.eu/updateportal

In the navigation main menu, tap

Tank options Tank

›

warning

.

Amundsen navigation data source

The navigation data is stored on an Original SD Card.

Driving with a trailer

Switch on trailer allowance to calculate the correct

route when using a trailer.

In order to ensure the function of the navigation, the

Original SD card, with the navigation data, must be

inserted in the respective slot in the external mod-

ule.

In main menu Navigation, tap

Tap Route options In-

›

clude trailer

.

If the original SD card should be damaged or lost, a

new original SD card can be purchased from the

ŠKODA Original Accessories.

Set navigation announcements

In main menu Navigation, tap

Navigation announce-

›

ments

.

With a non-original SD Card, navigation does not

work.

Select and set the desired menu item.

›

Preferred POI categories

Preferred POI categories are shown on the map and

made available when searching for a destination.

Determining the navigation database version

Tap System information

.

›

Infotainment Amundsen for Your Skoda Fabia 4 Door Third Generation (2014-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals