Get Infotainment Swing Guide for Skoda Fabia 4 Door Third Generation (2014-2020)

58 Infotainment Swing › Infotainment overview

Time and date.

Language.

Units.

▶

Infotainment Swing

Infotainment overview

Restore factory settings.

Sound settings

The Infotainment sound is set in the menu

Sound

.

The following menu items can be set up.

Setting the maximum volume when switching on

the Infotainment.

▶

Volume setting of the individual Infotainment func-

tions.

▶

Setting the equalizer.

Adjusting the volume ratio.

▶

Depending on the equipment, the following ad-

vanced sound settings can be set.

A

B

Touchscreen

SD card slot

Setting the sound system.

Setting the sound space optimisation for the driv-

er.

▶

Control dial left

Press: Switch Infotainment on/oﬀ

Turn: Set volume

▶

Switch on / oﬀ and set the sub-woofer volume.

▶

Control dial right

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

Press: Conﬁrm menu item

▶

Turn: select menu item/set value

▶

Radio menu

The conﬁguration wizard is automatically displayed if

the ignition is switched on and if there are at least

two menu items that have not been set after switch-

ing on the Infotainment or if a new user account has

been selected.

Media menu

Overview of Infotainment menus

Phone menu

Mute menu

To switch oﬀ the automatic display, when the

conﬁguration wizard is displayed tap Don't show again

›

.

Infotainment settings menu

SmartLink menu

For manual display, tap

Conﬁguration wizard

.

›

Disconnect the connected USB device safely

Press: Display menu

▶

Hold: Switch voice control of the SmartLink

application on / oﬀ

▶

NOTICE

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows.

Tap Remove safely

Select the desired device.

Sound settings

Information about vehicle settings

.

›

Disconnect/remove the device.

System

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

Limitation

device.

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

The Infotainment system indicates this by means of

a message in the screen.

Troubleshooting

Infotainment not responding

The Infotainment system must be restarted.

Basic settings

Press for more than 10 s.

Wait for the restart to complete.

›

Set basic functions

The following Infotainment functions are set in the

menu

.

Infotainment Swing › Screen 59

In principle, operation by touch is identical to the op-

eration of a mobile phone.

System update

We recommend having the system update carried

out by a specialist company.

The following operating modes are speciﬁc to the In-

fotainment system.

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

Settings

Determine system version

The following basic screen functions are set in the

Tap System information

.

›

menu

.

Screen.

Manual update

Information about available updates can be found on

the ŠKODA website.

Screen brightness level.

Turning oﬀ the screen.

Display the time.

▶

http://go.skoda.eu/updateportal

Conﬁrmation tones and animations.

Infotainment keyboard

Keypad overview

Check for available updates.

Save the update to a USB source.

Insert the USB source into the front USB input.

Tap System information Tap Update software

Select the connected USB device as the update

source.

Go to the update ﬁle and conﬁrm the update.

Conﬁrm any messages and wait for the update

›

The arrangement of the keypad characters depends

on the Infotainment language that has been set.

›

In Infotainment, the following types are used, de-

pending on the context.

.

Alphanumeric.

Numeric.

Keypad for input.

Keypad for search.

▶

›

process to complete.

Screen

Overview

Keypad example

A

Input line

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters in sequence

Show list of searched entries

A

B

Status bar

▶

Bar with the functional surfaces of the displayed

menu

B

Keypad functional surfaces

C

Other pages of the menu

▶

Change to lowercase

▶

Switch to the ﬁrst capital letter, followed by

lowercase letters

Operation

▶

/

Switch to the language keypad

Switch to the numeric and character key-

pad

NOTICE

Danger of screen damage!

▶

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

▶

Show additional keypad languages

Insert a space

Hold: Show additional character variants

60 Infotainment Swing › Radio

▶

Setting up additional keyboard languages

Move cursor to the left

▶

Move cursor to the right

Additional keyboard languages

.

›

▶

Conﬁrm the characters that have been en-

tered

Radio

Numeric keypad

Overview

Display menu

Tap

.

›

Analogue and digital radio reception

Keypad example

A

Input line

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters

A Select frequency range

B

Keypad functional surfaces

B Depending on the frequency range

FM: Radio text

▶

Conﬁrm the characters that have been entered

DAB: Name of the station group

If context-sensitive, alphanumeric characters can

C Station buttons for preferred stations

List of available stations

be entered by holding a functional surface with a

digit.

Manual station search

Operation

Display information about the station (applies to

DAB)

The Infotainment keypad is used to enter characters,

letters and numbers.

Settings

The keypad will be automatically displayed when In-

fotainment prompts for characters.

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Find

List of available stations

During the character input, a search for correspond-

ing entries takes place.

To display tap

.

›

Played station

The entry to be searched can be entered, including

diacritics.

Stations stored on the station buttons

A traﬃc radio station is set

DAB signal is not available

The DAB station reception is not stable

Filtering the stations in the list according to

the programme type.

To ﬁlter the FM stations, the RDS and AF func-

tion must be switched on.

To ﬁlter the DAB stations, the alphabetical

sorting function of the stations must be activa-

ted.

The keypad will only provide characters that match

the stored entries.

To display the searched entries, tap

.

›

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

Tap or repeatedly tap the ﬂag symbol until the

desired language keypad is displayed.

›

Update station list manually

Further character variants

Press and hold the sign with the symbol

Select the desired symbol.

.

›

Information about the program type being broadcast

and the type of regional station can be displayed in

the FM station list.

Infotainment Swing › Radio 61

Save station to favourites from the list of available

stations

Applies to AM, FM and DAB frequency ranges.

Operation

Select station

Hold the line with the name of the desired station.

Tap the desired preset button.

›

Delete favourites

In the Radio main menu , tap

Delete presets.

›

To delete one preset button for preferred stations,

tap the desired station button and conﬁrm the de-

letion.

To delete all preset buttons for preferred stations,

tap All and conﬁrm the deletion.

›

Tap or at the top of the screen.

›

Buttons

SCAN function

Applies to AM, FM and DAB frequency ranges.

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

The variant for changing stations using buttons

in the Radio main menu is set as follows.

To start automatic play press

Scan or the right

›

In the Radio main menu, tap

Choose the change variant.

Arrow buttons:.

›

rotary control

To end automatic play press

control

.

or the right rotary

›

Traﬃc reception (TP) for FM stations on/oﬀ

Applies to the FM frequency range.

.

Find stations manually

In the Radio main menu, tap

To search in sequence, tap or next to the dis-

played frequency range scale.

In the Radio main menu, tap

Traﬃc program (TP).

›

.

›

Switch traﬃc reception for DAB stations on/oﬀ

Applies to the DAB frequency range.

Or:

Hold down the scroll mark on the frequency range

scale and move it to the desired value.

In the Radio main menu, turn on menu item

Traf-

›

ﬁc Radio (TP)

.

›

In the Radio main menu, tap

Advanced settings DAB

›

traﬃc programme announcements (TP) on/oﬀ.

Or:

Assign the station logo from an external source

Applies to AM, FM and DAB frequency ranges.

Turn the right rotary control

.

›

Infotainment oﬀers the option to assign logos from

the pictures on an external source to the station but-

tons.

Limitation

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Parking garages, tunnels, tall buildings or moun-

tains can restrict radio reception.

In the rear side windows, there may be antennas

for receiving the radio signal.

▶

For station logos, images in jpg, png format with a

maximum resolution of 400x240 pixels can be used.

In the main menu Radio tap on

Tap the desired station button.

Select the external source with the logo.

Find the desired logo and conﬁrm.

Station logos

.

›

Covering the windows with foils or metal-coated

stickers can impair the reception of the radio sig-

nal.

Delete station logos

Applies to AM, FM and DAB frequency ranges.

The ŠKODA AUTO company does not assume any

responsibility for the availability, correct function

or broadcast information of the RDS service.

▶

In the Radio main menu, tap

To delete a logo, tap the desired preset button and

conﬁrm the deletion.

Station logos:.

›

To delete all logos, tap on All and conﬁrm the dele-

tion.

›

Settings

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

Save the station currently being listened to as a fa-

vourite from the Radio main menu

Hold the desired station key for preferred stations

until the station is stored.

›

When the function is switched on and station pre-

sets are displayed, detailed information about the

62 Infotainment Swing › Media

broadcast content of the FM station being listened

to, or the name of the station group for the DAB sta-

tion, is displayed.

In the Radio main menu, tap on

Advanced settings

›

Other DAB announcements

.

Switch automatic program tracking of a DAB sta-

tion on / oﬀ

Applies to the DAB frequency range.

In the Radio main menu, tap

Radio text.

›

Switch automatic frequency control (AF) on/oﬀ

Applies to the FM frequency range.

When the function is switched on and the DAB sta-

tion is lost, Infotainment automatically changes to

the same station with a better signal in a diﬀerent

DAB station group.

When the function is switched on and the signal of

the FM station currently being listened to is weak,

Infotainment automatically sets the same station to

a diﬀerent frequency with a better signal.

In the main menu Radio tap on

Advanced settings

›

DAB - DAB program tracking

.

In the Radio main menu, tap on

Advanced settings

›

Automatic frequency control (AF)

.

Turn on/oﬀ automatic switching from a DAB sta-

tion to the same FM station

Applies to the DAB frequency range.

Sort stations in the list of available stations

Applies to the FM frequency range.

When the function is switched on and the DAB sta-

tion being listened to is lost, Infotainment automati-

cally changes to the same FM station. The symbol

(FM) is displayed after the station name.

▶ In the Radio main menu, tap on

Advanced settings

Sort station list:

.

Select the sorting of stations in alphabetical order

or by group.

▶

When the corresponding DAB station can be re-

ceived again, the station automatically changes from

FM to DAB.

Automatic change of frequency to a regionally

linked FM station

Applies to the FM frequency range.

In the main menu Radio tap on

Advanced settings

›

Infotainment provides the option of automatically

switching to a regionally linked FM station in case of

signal loss of the FM station being listened to.

Automatic DAB - FM switching

.

Media

In the Radio main menu, tap on

Advanced settings

›

RDS Regional:

.

What you should be mindful of

Select one of the following menu items.

›

▶

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

Fixed - If there is a loss of signal, another station

must be set manually.

Automatic - automatic selection of the station with

the best signal reception.

▶

If reception is lost in the given region, Infotainment

will automatically set another available region.

Switch RDS on/oﬀ

Applies to the FM frequency range.

The menu item is only available for some countries.

In the main menu Radio tap on

Advanced settings

›

Radio Data System (RDS)

.

If the RDS function is disabled, the following menu

items in FM station settings are not available.

Traﬃc programme (TP).

Radio text.

RDS Regional.

▶

Overview

Display menu

Tap

.

›

Automatic frequency change (AF).

Switch additional DAB announcements on/oﬀ

Applies to the DAB frequency range.

When the function is switched on, other announce-

ments are received as traﬃc announcements. For ex-

ample, weather news, sports reports, ﬁnancial news,

etc.

Infotainment Swing › Media 63

Limitation

NOTICE

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

Settings

Switch track playback including subfolders on / oﬀ

A Select source

In the main menu, tap Media

Mix / repeat including sub-

›

Manage ﬁles / multimedia database

Settings

folders

.

Traﬃc

To turn on/oﬀ the traﬃc monitoring during the

playback of media ﬁles, go to the Media main menu

›

Operation

and tap on

Traﬃc programme (TP).

Safely disconnect the connected device

Operation - Basics

NOTICE

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows.

In the main menu, tap Media

Select the desired device.

Disconnect/remove the device.

Remove safely:

.

›

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

device.

A Album image / symbol of the connected source

Tap: display available albums

Bluetooth® player

Infotainment allows audio ﬁles of a connected Blue-

tooth® player to play using the A2DP and AVRCP au-

dio proﬁle.

Tap: start playback

Tap: pause

Within 3 seconds of starting playback, tap: play

the previous song

With Infotainment, multiple devices can be paired

using Bluetooth®, but only one of them can be used

as a Bluetooth® player.

After 3 seconds from the start of playback, tap

to play the current title from the beginning

For connecting the Bluetooth® player, pair and

connect the device via Bluetooth®.

›

Hold: fast rewind within the title

Tap: play the next song

In the Media main menu , tap on

Bluetooth paired

›

devices

.

Hold: fast forward within the title

In the list, choose the device with the symbol

.

Movement within the title is also possible by drag-

ging the ﬁnger over the timeline.

If a device is connected to Infotainment using

Apple CarPlay or Android Auto, then it cannot be

connected using Bluetooth®.

Extended operation

Turn repeat playback of the current track on/oﬀ

Turn repeat playback of the current album/fold-

er on/oﬀ

Turn random playback of the current album/

folder on/oﬀ

SD card

NOTICE

Risk of damaging the SD card reader!

Do not use SD cards with a broken slide for write

protection.

▶

To insert the SD card, with the bevelled corner to

the right, push into the slot in the external module

until it snaps into place.

›

64 Infotainment Swing › Media

To remove, ﬁrst disconnect the SD card safely. To

We recommend that you use extension cords from

ŠKODA original accessories.

›

do so, in the main menu tap Media

Remove safely:

USB extension cables or reducers can impair the

playback function of the connected device.

and select the SD card.

Press on the inserted SD memory card.

›

The SD card moves to the eject position.

Load USB audio source

After connecting the USB device, charging will start

automatically when the following conditions are met.

NOTICE

When using an SD card with an adapter, vehicle vi-

brations might cause the card to fall out of the

adapter.

✓ The ignition is switched on.

✓ The USB device allows charging.

The charging eﬃciency can be diﬀerent compared to

the charging from the usual mains power supply.

USB device

To connect, insert the USB device into the appro-

priate port.

›

Depending on the type of the connected USB device

and the frequency of use, the charging current may

not be suﬃcient to charge the battery of the con-

nected device.

Use USB ports that support data transfer to play

audio ﬁles.

To disconnect disconnect the USB device ﬁrst. To

do so, in the main menu tap Media

›

Some connected audio sources may not be recog-

nised and cannot be charged.

Remove safely:

and select the USB device.

Disconnect the USB device.

›

A USB device can be connected directly to the

USB port or via a connection cable.

Supported sources and ﬁles

Supported sources

Source

Interface

Type

Speciﬁcation

File system

SD

SDHC

SD card

SD card reader

Standard size

SDXC

USB stick

HDD

(without special soft-

ware)

USB devices that sup-

port the USB Mass Stor-

age protocol

MSC

FAT16

FAT32

exFAT

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

Devices running the An-

droid or Windows Phone

operating system that

support the Media

Transfer Protocol

Devices with an iOS op-

erating system

Bluetooth® protocols

A2DP and AVRCP (1.0 -

1.5)

MTP

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

The GPT standards (GUID partition table) method structured audio sources are not supported by Infotain-

ment.

Viewing images on the Infotainment screen is not supported by connected Apple devices.

Mobile device compatibility

It is possible to check the ŠKODA web pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code.

Infotainment Swing › Mobile device management 65

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio ﬁles

Compression for-

mat

Codec type

File suﬃx

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi-channels

Mono, Dual Mono,

Stereo, Joint

Stereo

Mono,

Stereo, Joint

Stereo

MPEG 1 Layer 3

mp3

32 - 320

8 - 160

32, 44, 48

MPEG

WMA

MPEG 2 Layer 3

16, 22, 24

8, 11, 12

MPEG 2.5 Layer 3

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

Windows Media

Audio 10

8 - 384

8 - 320

8 - 384

8, 11, 12, 16,

22, 32, 44,

48

Mono, Stereo,

Joint Stereo

wma

32, 44, 48,

96

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported playlists

Codec type

File suﬃx

M3U

PLS

m3u

pls

WPL

ASX

wpl

asx

Mobile device management

Overview

Mobile device management

In the Telephone main menu, tap on the function surface

Bluetooth Paired devices

.

›

The following icons can appear in the list of paired mobile devices for the individual devices.

White icon - the device can be connected as a telephone.

Green icon - the device is connected as a telephone.

White icon - the device can be connected as a Bluetooth® player.

Green icon - the device is connected as a Bluetooth® player.

Possible functions of the connected mobile device

The functions of a device connected via over the HFP Bluetooth proﬁle depends on the following connection

types.

66 Infotainment Swing › Mobile device management

First device

Main telephone

Second device

Additional phone

Incoming / outgoing calls

Telephone contacts

Bluetooth® player

With Infotainment only a mobile device can be connected as a Bluetooth® player.

Due to the variety of applications, as well as their on-

Mobile device and application limitations

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Availability of features

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Connection restrictions

With Infotainment, a max. of 20 mobile devices are

paired.

The range of the connection of the mobile device

to Infotainment is limited to the passenger com-

partment.

▶

Information about the ŠKODA applications

Detailed information on the ŠKODA applications can

be found on the website after reading the following

QR code or using the link.

▶

http://go.skoda.eu/mobile-apps

After reaching the maximum number, the pairing

of the next mobile device will replace that of the

device that has not been used for the longest peri-

od of time.

▶

Mobile device compatibility

It is possible to check the ŠKODA web pages to see

if Infotainment is compatible with the selected mo-

bile device being tested. This check is carried out by

using the following reference or by reading the QR

code.

Connection set-up

Connect a mobile device to Infotainment

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Infotainment Bluetooth®

›

http://go.skoda.eu/compatibility

Bluetooth

›

Bluetooth

.

Switch on Bluetooth® visibility of the Infotainment

Bluetooth Visibility: Visible.

Find the Bluetooth® devices available in the mobile

device.

.

All information given is incidental and serves as in-

formation.

Select the Infotainment Bluetooth® unit.

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

The name of the unit can be found by tapping

Bluetooth Name:

.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

The mobile device is connected to the Infotainment

or just paired, depending on the number of devices

that are already connected.

Connect Infotainment to a non-paired mobile de-

vice

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Infotainment Bluetooth®

›

Applications in mobile devices

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

›

Bluetooth

›

Bluetooth

.

Bluetooth Tap Search devices

Ensure the visibility of the device to be connected.

.

›

Infotainment Swing › Telephone 67

Select the desired device from the list of Blue-

tooth® devices.

Conﬁrm the PIN; enter it if necessary and then

Tap: View the list of previously connected

phones

▶

›

B Station buttons for preferred contacts

C Select storage group of the preferred contacts

D Name of the telephone service provider

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

▶

If the symbol is displayed in front of the name,

roaming is active.

Connect Infotainment to an already paired mobile

device

The connection with an already paired mobile device

is made automatically after switching on the ignition;

if necessary the device can be connected manually

as follows.

Enter phone number

Contact list

Call lists

Switch on voice control of the connected phone

Settings

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

Turn on the Infotainment Bluetooth®

›

Bluetooth

›

Bluetooth

.

Conditions for connecting a telephone with

Infotainment

Bluetooth Paired devices

In the device list, select the desired device and the

Bluetooth® proﬁle.

.

›

✓ The ignition is switched on.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

✓ The Bluetooth® function of the Infotainment and

the telephone needs to be switched on.

The Bluetooth® function of the Infotainment is

switched on in the menu item

.

Bluetooth

.

Disconnect from a mobile device

Bluetooth Paired devices

Tap the icon of the Bluetooth® proﬁle of the de-

sired mobile device.

.

✓ Visibility of the Infotainment is switched on.

›

The visibility of the Infotainment is switched on in

the menu item

Bluetooth Visibility: Visible.

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

Delete a paired mobile device

Bluetooth Paired devices

To delete one mobile device tap and conﬁrm the

deletion.

.

›

✓ Through Infotainment, no mobile device can be

connected using Apple CarPlay.

To delete all mobile devices tap Clear all and conﬁrm

the deletion.

›

Telephone operation

Enter telephone number

Telephone

Overview

In the Telephone main menu, tap

Enter the telephone number using the numeric

keypad that is displayed.

.

›

Display menu

Tap

.

›

The displayed numeric keypad can also be used

for searching for contacts.

If the menu Telephone is not displayed, check

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

whether the mobile device is connected.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

To display the contact list in the telephone main

›

menu, tap

.

To ﬁnd details within the list, tap Find

Enter the details you wish to ﬁnd.

.

›

A Name of the connected phone

68 Infotainment Swing › SmartLink

To establish a connection with a contact, tap the

functional area showing the desired contact.

Sort contacts in the phone book

›

In the Telephone main menu, tap on

User proﬁle

›

Sort by:

.

If a contact has multiple telephone numbers, select

the telephone number from the displayed list.

Select the type by which to sort.

›

Ringer

To display the details for a contact, tap

.

›

Some phones do not allow the use of the telephone

ringtone; instead, the Infotainment ringtone is used.

Telephone call

Depending on the context of the telephone conver-

sation, the following functions can be selected.

To set the Infotainment ringer in the Telephone

›

main menu, tap on

User proﬁle Select ringtone.

End connection set-up / reject incoming call /

end call

Select the ringtone.

›

Answer an incoming call / Return to the call on

hold

Switch the ringer oﬀ / on

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

Simultaneous calls

This applies to some countries.

/

Depending on the connected telephone, it is possible

to answer the next incoming call and hold the previ-

ous call.

/

To switch on/oﬀ simultaneous calls, tap on Tele-

›

To switch the call from the speakers to the tele-

phone, go to the Telephone main menu and tap on

›

phone

Simultaneous calls

.

Hands-free

.

To switch the call tone from the telephone to the

speakers, tap

SmartLink

.

Functionality

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

Settings of the Infotainment telephone

functions

Manage preset buttons for preferred contacts

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

To save the desired preset button, press and hold.

Select a contact from the displayed list.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

›

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

›

Mobile devices can be connected via a USB cable.

To delete tap on Telephone

vourites in the main menu.

User proﬁle Manage fa-

›

Supported connection types

SmartLink supports the following connection types.

To delete one preset, tap on the list entry and con-

ﬁrm the deletion.

Android Auto.

Apple CarPlay.

MirrorLink.

▶

Or:

To delete all presets, tap on Delete all and conﬁrm the

deletion.

›

Overview of the SmartLink connection

Display menu

Import phone contacts

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

Tap

.

›

Infotainment can import up to 2000 telephone con-

tacts. Each contact can have max. 5 phone numbers

included.

Depending on the phone type, it might be necessary

to conﬁrm the import.

Update phone contacts

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

To update the lists manually in the Telephone main

›

A Previously connected device

B Currently connection device

menu, tap on

User proﬁle Import contacts

.

Infotainment Swing › SmartLink 69

Connection conditions

Display information about SmartLink

Disconnection of the active connection

Settings in SmartLink menu

General connection conditions

✓ The mobile device supports the following Smar-

tLink connection types: Android Auto. Apple Car-

Play and MirrorLink.

✓ Mobile devices, as well as the type of Smar-

tLinkconnection, are supported in the respective

market.

Android Auto

✓ Some connected mobile devices require the mo-

bile device to be “unlocked”.

Conditions for Android Auto

✓ The device to be connected must have Android

AutoSupport.

A list of devices, supported regions and applica-

tions that the Android Auto connection supports

can be found on the websites of Google Inc..

Overview of running applications, phone calls, re-

ceived text messages and the like.

✓ The Android Auto application needs to be instal-

led on the mobile device.

✓ Some applications require the data connection in

Switching on voice control (Google Voice)

the mobile device to be turned on.

Apple CarPlay

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlaySupport.

A list of devices, supported regions and applica-

tions that the Apple CarPlay connection supports

can be found on the websites of Apple Inc..

✓ Siri voice control is on.

✓ The data connection is switched on in the mobile

device.

A

B

List of available applications

Conditions for MirrorLink

✓ The device to be connected must have Mirror-

LinkSupport.

Depending on the duration of operation:

Tap: Return to the Apple CarPlay main menu

Hold: Turn on voice control (Siri)

▶

A list of devices and applications that the Mirror-

Link connection supports can be found on the

websites of Car Connectivity Consorcium®.

▶

MirrorLink

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

Operation

Operation of the running MirrorLink application

Move the functional areas to the left edge of

the screen

It is not possible to operate the application while

driving

Move the functional areas to the right edge of

the screen

Move the functional areas to the top of the

screen

Return to the SmartLink main menu

List of running applications

Display the last running application in the connec-

ted mobile device

Move the functional areas to the bottom of

the screen

Return to the MirrorLink main menu

Settings

70 Infotainment Swing › SmartLink

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

Limitation

›

Restriction of SmartLink applications while driving

For safety reasons, operation of some SmartLinkap-

plications while driving is not possible or is restric-

ted.

Choose to connect via Android Auto.

›

Android Auto - Disconnection

In the main menu of Android Auto

turn to ŠKODA”.

tap on “Re-

›

Functionality restriction of Infotainment with an

Android Auto connection

Tap on

.

›

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

▶

MirrorLink - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

›

Choose to connect through MirrorLink.

›

For the duration of the connection, no other Blue-

tooth® devices can be connected to the Infotain-

ment system.

▶

MirrorLink - Disconnection

In the MirrorLink main menu, tap

.

›

Tap on

.

Functionality restriction of Infotainment with an

Apple CarPlay connection

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

▶

Tap

.

›

Connecting the device disconnects all currently

connected Bluetooth® devices.

For the duration of the connection, no Bluetooth®

devices can be connected to the Infotainment sys-

tem.

▶

Select the desired device or connection type.

Functionality restriction of Infotainment with an

MirrorLink connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

▶

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Depending on the device to be connected, a con-

nection conﬁrmation may be required.

Settings

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Apple CarPlay.

›

Apple CarPlay – Disconnection

In the Apple CarPlay main menu, tap on the “ŠKO-

DA” functional area.

›

Tap on

.

›

Android Auto - Connection via USB

Turn on the Infotainment.

›

Infotainment Swing for Your Skoda Fabia 4 Door Third Generation (2014-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals