Storage space and interior equipment › Net partition 137
Hold the raised cover
›
Net partition
Fasten the net partition
Fasten
in place and press the
underside of the cover
on both sides.
Remove the cover.
›
Inserting
Insert the attachment
›
A opposite to the
holder B on both sides
of the boot.
Remove the variable loading floor or adjust it to its
lowest position.
Remove the roll-up cover or fold the rear seat
backrests forward.
›
Press on the cover
from above until it en-
gages.
Hook in the retaining
straps.
›
›
›
› Insert the crossbar into the mount A on one side
and push it forwards.
Attach the bar to the other side in the same way.
›
Store the cover behind the rear seats
› Snap the carabiners B into the lashing eyes.
› Pull the straps firmly at the free ends C .
Insert the cover behind
›
the rear seats.
Loosen
Loosening takes place in the reverse order to fasten-
ing.
Double-sided floor covering
Overview
Install cover in the lowered position
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Insert the holder oppo-
site the bracket on
›
both sides of the boot.
Press on the front and
rear cover from above
until it snaps into place.
›
Rigid boot cover
The maximum load of
the cover in the lowered
position is 2.5 kg.
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
Unhook the straps.
›
English 
