110 Driver assist systems › Speed limiter
Press the button.
When the regulation starts
set limit is displayed.
highlighted and the
›
The Front Assist menu
item is displayed.
› Press dial A .
Operating conditions
✓ The driving speed is higher than 30 km/h.
Operation
Variant without cruise control
Activation/deactivation
In the Infotainment system, in the menu
.
Or:
.
Show system deactivation in the display of the in-
strument cluster
illuminates together with
Deactivate Front Assist when handling the vehi-
cle on a truck, a car ferry etc.
A
Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
Resume control1) / Increase limit
Troubleshooting
B
Front Assist is not available
C
Start control with current speed / Reduce
illuminates together with
limit
Clean the front radar sensor.
Stop the engine and start again.
If Front Assist is still unavailable, check the brake
lights on the vehicle or on the attached trailer.
›
Variant with cruise control
›
›
If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
rage.
›
There was an unfounded warning or system inter-
vention
Clean the front radar sensor.
If the system is not working properly, disable Front
Assist and seek the help of a specialist garage.
›
›
A
Activate cruise control (condition for the
subsequent activation of the limiter).
To enable the speed limiter, press the button D
and in the instrument cluster choose the menu
Speed limiter
Functionality
item Speed limit
.
Deactivate limiter
The speed limiter controls the maximum driving
speed according to the set speed limit.
Interrupt control (sprung position)
Resume control1) / Increase limit
B
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
C
Start control with current speed / Reduce
limit
Status display in the instrument cluster display
illuminates - the cruise control is activated.
flashing - the set limit is exceeded
1)
If no speed limit is set, the current speed is set as the speed limit.