Infotainment Amundsen › Data connection 87
Connect Infotainment to the mobile device hot-
spot
Turn on the Infotainment’s Wi-Fi unit in the menu
›
item
Wi-Fi Wi-Fi: Wi-Fi.
Turn on the ignition.
Turn on the Infotainment’s Wi-Fi unit in the menu
›
›
Tap Manual settings
Enter the name of the hotspot to connect to and
the access password.
.
›
›
item
Wi-Fi Wi-Fi Wi-Fi switch on
Select the desired hotspot in the list of available
hotspots.
Enter the password for connecting to mobile devi-
ces.
›
›
Tap Connect
.
›
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Tips for a perfect connection
Keep only the hotspot to be connected switched
on and switch off the other hotspots.
Delete unused hotspots. This shortens the time re-
quired to establish a connection.
For some hotspots, the connection takes longer, so
wait for the connection to finish.
If the connection is interrupted, recheck the availa-
ble hotspots and repeat the connection.
Infotainment stores passwords for previously
connected hotspots.
▶
▶
▶
▶
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
changed.
Change the name of the Infotainment hotspot
Tap
SSID:
Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
›
.
Enter the name and confirm.
›
›
Tap Save
.
Data connection
Settings
Change password for connection to Infotainment
hotspot
The password must be a minimum of 8 and a maxi-
mum of 63 characters.
Mobile data
Mobile data for the data connection may be sub-
ject to charges according to the mobile network
operator's tariff conditions.
Tap
Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
›
Network key:
.
Enter the password and confirm.
›
›
Types of data connection setup
Tap Save
.
By connecting the Infotainment with the external
hotspot via Wi-Fi.
▶
Quick connection of a mobile device to the Info-
tainment hotspot
Using the USB device CarStick.
▶
Turn on the ignition.
Turn on the Infotainment’s Wi-Fi hotspot in the
menu item
›
›
Connecting using the USB device CarStick
The CarStick USB device can be purchased from the
ŠKODA original accessories.
Wi-Fi Mobile Hotspot Mobile Hotspot
.
Tap WPS quick connection (WPS button)
In the mobile device, switch on the option for con-
nection via WPS.
Wait for the connection to be established and, if
necessary, confirm the respective messages.
.
›
›
Insert a SIM card with activated data services into
the CarStick.
›
The required size of the SIM card and the correct
procedure when inserting can be found in the in-
structions enclosed with the CarStick device.
›
Turn on the ignition and switch on Infotainment.
Insert the CarStick into the USB input at the front.
Wait approximately one minute until a light other
than the red indicator light on CarStick is perma-
nently lit.
Quick connection of Infotainment to the mobile
device hotspot
›
›
Turn on the ignition.
On the mobile device, turn on the hotspot, its visi-
›
›
›
bility, and the option for WPS connection.
Turn on the Infotainment’s Wi-Fi unit in the menu
›
When the red indicator light illuminates, remove
the CarStick and insert again.
If the SIM card is protected by a PIN code, then the
item
Wi-Fi Wi-Fi: Wi-Fi
.
Tap WPS quick connection (WPS button)
.
›
›
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
PIN code of the SIM card must be entered.
Confirm the entered PIN code by tapping
.
›
Manual connection of Infotainment to the mobile
device hotspot
Set the hotspot backup of the mobile device to
WPA2.
Turn on the ignition.
Or:
Tap to save and confirm the PIN code.
If necessary, set the required network of the data
service provider.
›
›
›
›
English 
