62 Infotainment Swing › Media
Turn repeat playback of the current album/fold-
er on/off
Turn random playback of the current album/
folder on/off
SD card
NOTICE
Risk of damaging the SD card reader!
Do not use SD cards with a broken slide for write
protection.
▶
To insert the SD card, with the bevelled corner to
the right, push into the slot in the external module
until it snaps into place.
›
Restriction
The availability of some media operation functions is
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
To remove, first disconnect the SD card safely. For
›
›
this in the menu media
tap on Remove safely: and
select the SD card.
Press on the inserted SD memory card.
The SD card moves to the eject position.
NOTICE
When using an SD card with an adapter, vehicle vi-
brations might cause the card to fall out of the
adapter.
Settings
Turn title playback including subfolders on/off
In the Media menu tap on
Mix/Repeat including subfold-
›
ers.
.
Traffic
To turn on/off traffic monitoring during playback
of media files, go to the Media in the main menu
›
USB device
To connect, insert the USB device into the appro-
priate port.
›
and tap on Traffic program (TP)
.
Safely disconnect the connected device
To play audio files, use USB ports that support data
transfer.
NOTICE
Risk of damage to the data on the connected device!
To safely disconnect/remove the device, proceed as
follows:
To disconnect disconnect the USB device first. For
›
this in the menu media
tap on Remove safely: and
select the USB device.
Disconnect the USB device.
In the Media menu tap on
Select the desired device.
Disconnect/remove the device.
Remove safely:
.
›
›
›
›
A USB device can be connected directly to the
USB port or via a connection cable.
We recommend using connection cables from the
ŠKODA Original Accessories range.
USB extension cables or reducers may affect the
playback function of the connected device.
If it is not possible to safely disconnect the de-
vice, switch off the Infotainment and disconnect the
device.
Bluetooth® player
Infotainment allows audio files of a connected Blue-
tooth® player to play using the A2DP and AVRCP au-
dio profile.
Load USB audio source
After connecting the USB device, charging will start
automatically when the following conditions are met:
With Infotainment, multiple devices can be paired
using Bluetooth®, but only one of them can be used
as a Bluetooth® player.
✓ The ignition is switched on.
✓ The USB device allows charging.
The charging efficiency can be different compared to
the charging from the usual mains power supply.
For connecting the Bluetooth® player, pair and
connect the device via Bluetooth®.
›
Depending on the type of the connected USB device
and the frequency of use, the charging current may
not be sufficient to charge the battery of the con-
nected device.
In the Media menu tap on
In the list, choose the device with the symbol
Bluetooth Paired devices
.
›
›
.
If a device is connected to Infotainment using
Apple CarPlay or Android Auto, then it cannot be
connected using Bluetooth®.
Some connected audio sources may not be recog-
nised and cannot be charged.
Supported sources and files
English 
