Maintainingandcleaning for Your Skoda Fabia 4 Door Fourth Generation (2021-2026)

Maintaining and cleaning › Service events 147  
In mm  
Maintaining and cleaning  
Fabia  
Fabia Combi  
Service events  
A
B
C
D
E
955  
766  
574.1  
383.1  
min. 65  
350-420  
957  
1017  
541.1  
372.1  
min. 65  
350-420  
service intervals  
Compliance with service intervals is crucial for the  
life and value of the vehicle.  
You will be notified of the due date for service with  
the symbol and the corresponding message on the  
display of the instrument cluster.  
F
The specialist garage will inform you of the type of  
service interval, the option of changing this and the  
scope of service.  
Maximum vertical load for trailer operation  
The maximum vertical load for trailer operation de-  
pends on the engine type and the vehicle equipment.  
All services and the replacement or refilling of op-  
erating fluids are chargeable to the customer, even  
during the warranty period, unless the ŠKODA AUTO  
warranty conditions or other binding agreements de-  
termine otherwise.  
The valid specification for your vehicle can be found  
in the technical vehicle documentation, (e.g. vehicle  
approval documentation, the COC document) or at a  
ŠKODA partner.  
Other information (e.g. on the nameplate of the trail-  
er device) merely provides information on the test  
values of the device.  
Proof of service  
A specialist garage stores the proof of service in the  
information system called Digital Service Plan.  
Support load with mounted accessories  
When using the accessories (e.g. bicycle carrier), the  
maximum length and the permissible total weight in-  
cluding load must be considered.  
The proof of service can be printed out.  
Displaying the service due date in the Infotainment  
system  
The maximum length of the mounted accessories  
(from the ball of the towing device) may not exceed  
70 cm.  
In Infotainment, select the following menu:  
Menu item for the Service  
Or:  
The permissible total weight of the installed acces-  
sory, including its load, corresponds to the maximum  
load on trailers.  
Menu item for the Service  
Resetting information  
This value applies if the centre of gravity is at a dis-  
tance of no more than 30 cm from the towing device  
ball head.  
We recommend that you do not reset the informa-  
tion regarding service events on your own. It can  
lead to incorrect setting of the service intervals and  
thus also to possible faults in the vehicle.  
If the distance of the centre gravity of the load to  
the ball head of the towing device is greater than  
30 cm, then the max. permissible total weight of the  
accessory, including its load, decreases (e.g. at a dis-  
tance of 60 cm from the ball head, the permissible  
weight decreases by half).  
For vehicles with a variable service interval, new  
service interval values calculated according to the  
previous operating conditions will be displayed after  
the oil change service indicator is reset. These values  
will then continue to be adjusted according to the  
current operating conditions.  
WARNING  
Risk of an accident!  
Do not exceed the maximum vertical load.  
Service work, adjustments and technical  
changes  
The permissible trailer load and the weight of an-  
other accessory, e.g. of the bike carrier, is not to be  
exceeded.  
The instructions and guidelines from ŠKODA AUTO  
must be observed when carrying out any modifica-  
tions, repairs or technical alterations to the vehicle.  
NOTICE  
Risk of damage to the trailer and the vehicle itself!  
When using the accessory (e.g. bicycle carrier), ob-  
serve the maximum length and the permissible to-  
tal weight of the accessory incl.  
Adhering to these instructions and guidelines helps  
ensure road safety and helps keep the vehicle in a  
good technical condition.  
We advise only using ŠKODA Original Accessories  
and ŠKODA Original Parts which have been expressly  
approved for use on your vehicle. Reliability, safety  
148 Maintaining and cleaning › Interior  
and suitability for your vehicle are guaranteed with  
these.  
non-legitimate installation in another vehicle (e.g. af-  
ter a theft) or operation outside the vehicle.  
ŠKODA Service partner  
All ŠKODA service partners work according to the  
instructions and guidelines from ŠKODA AUTO.  
Service and repair work is therefore carried out on  
time and at the appropriate quality. Adhering to  
these instructions and guidelines helps ensure road  
safety and helps keep the vehicle in a good technical  
condition.  
Interior  
What you should be mindful of  
NOTICE  
Use cleaning agents intended for cleaning and care  
of the individual materials.  
Do not use aggressive cleaning agents or chemical  
solvents.  
We therefore advise having all modifications, repairs  
and technical alterations to the vehicle carried out by  
a ŠKODA Service Partner.  
Natural leather / Faux leather / Alcantara ® / Sue-  
dia / material  
ŠKODA original parts  
We recommend the use of ŠKODA Genuine Parts for  
your vehicle, as these parts are approved by ŠKODA  
AUTO. These parts comply wholly with ŠKODA AU-  
TO regulations and are identical to the parts used in  
series production.  
NOTICE  
Remove impurities as soon as possible.  
Do not use solvents, floor wax, shoe cream, stain  
remover or similar agents on Alcantara® and Suedia  
suede seat upholstery.  
ŠKODA AUTO is able to warrant the safety, suitabili-  
ty, and long life of these products.  
Make sure that natural leather is not moistened  
when cleaning and that no water seeps into the  
seams.  
ŠKODA Service Partners are liable for any defects of  
ŠKODA Genuine Parts for a period of 2 years after  
sale in accordance with the materials defect liability,  
unless agreed otherwise in the purchase agreement.  
Do not clean the roof cladding with a brush.  
NOTICE  
Risk of fading to the cover fabric!  
If necessary, do not leave the covers for long peri-  
ods in the blazing sun.  
ŠKODA original accessories  
We recommend that you use ŠKODA Genuine Ac-  
cessories in your vehicle. With these accessories,  
ŠKODA AUTO stands for safety, reliability and the  
suitability for your vehicle type.  
®
During use, the leather and Alcantara - and Suedia  
and materials may show minor changes (e.g. folds  
or discolouration). This does not constitute a mate-  
rial defect.  
Some clothing fabrics, e.g. dark denim, sometimes  
do not have sufficient colour fastness. As a result,  
discolouration that is clearly visible on the seat up-  
holstery can occur. This is not a defect in the fab-  
ric.  
Sharp-edged zippers, rivets, clamps and similar  
garments can damage the upholstery in the vehi-  
cle. Such damages cannot be subsequently recog-  
nised as a justified complaint.  
ŠKODA Service Partners are liable for any defects of  
ŠKODA Genuine Accessories for a period of 2 years  
after installation or delivery in accordance with the  
materials defect liability, unless agreed otherwise in  
the purchase agreement or any other agreements.  
Spoiler  
WARNING  
Risk of an accident!  
Only use the original spoiler on the front bumper in  
combination with the original spoiler on the boot  
lid.  
Plastic parts  
The original spoiler on the front bumper cannot be  
left on its own without the spoiler on the luggage  
compartment lid or in combination with an unsuita-  
ble spoiler on the luggage compartment lid.  
NOTICE  
Risk of damaging the dash panel!  
Do not attach fragrances and air fresheners to the  
dash panel.  
We recommend that you consult the ŠKODA Serv-  
ice Partner for any repairs to or replacement, addi-  
tion or removal of spoilers.  
Windows  
NOTICE  
Component protection  
Risk of damage to the filaments or the glass antenna!  
Do not stick stickers on the heating filaments.  
Do not use sharp objects (such as pot scrapers,  
etc.) to clean the windows.  
Some electronic vehicle components (such as the in-  
strument cluster) are factory-equipped with compo-  
nent protection. This component protection ensures  
the functional limitation of these components in a  
Maintaining and cleaning › Exterior 149  
Covers on electrically heated seats  
Exterior  
NOTICE  
What you should be mindful of  
Risk of damaging the heating system!  
Do not clean the seats with water or other liquids.  
Do not dry the seats by switching on the heating.  
WARNING  
Risk of accident!  
After washing the vehicle, the functionality of the  
brake system may be affected by moisture and, in  
winter, by ice.  
Seat belts  
NOTICE  
Risk of damage to the seat belts!  
Dry and clean the brakes by braking several times.  
Do not dry clean the seat belts.  
NOTICE  
Allow cleaned belts to dry before rolling up.  
Bird droppings, insect residues, litter and sea salt  
residues, overflowed fuel etc. are to be removed as  
soon as possible.  
Instructions for cleaning  
Do not use rough sponges, scourers or similar to  
remove dirt.  
Use cleaning agents intended for cleaning and care  
of the individual materials.  
Do not use aggressive cleaning agents or chemical  
solvents.  
Do not polish the vehicle in a dusty environment.  
Natural leather / Faux leather / Alcantara ® / Sue-  
dia / material  
Remove dust and dirt on the surface with a vac-  
uum cleaner.  
Remove fresh impurities with water, slightly mois-  
tened cotton cloth or woollen cloth; if necessary,  
use a mild soap solution 1) and wipe with a dry  
cloth.  
NOTICE  
Paint damage should be repaired as soon as possi-  
ble.  
Do not treat matt lacquered parts with polish or  
hard wax.  
Remove stubborn stains with a suitable cleaning  
agent.  
For regular care of natural leather, use the equip-  
ment provided for this purpose. After each clean,  
use a care cream with light protection and impreg-  
nation effect.  
Do not polish foils.  
We recommend treating door seals and window  
guides with the appropriate tools from ŠKODA  
original accessories. These ensure that the protec-  
tive lacquer layer of the seals and window guides is  
not attacked.  
When looking after Alcantara®-, Suedia and and  
fabric surfaces, remove stubborn hair with a clean-  
ing brush. Remove pills from materials with a  
brush.  
Do not use abrasive cleaning agents to clean the  
rear view camera.  
Plastic parts  
Remove impurities with water, slightly moistened  
cloth or sponge with a suitable cleaning agent if  
necessary.  
Windows  
Remove impurities with clean water and dry with a  
cloth provided for this purpose.  
Move the windscreen wiper lever to position  
to adjust.  
If there are special attachments on your vehicle,  
observe the instructions of the car wash operator.  
Infotainment screen  
Remove any impurities on the screen using the  
cleaning agents provided.  
After washing with a wax preservation  
Wipe off the windscreen wiper blades with a dry  
cloth.  
NOTICE  
Danger of screen damage!  
When removing dirt, do not press on the screen.  
Covers on electrically heated seats  
Remove impurities with a suitable cleaning agent.  
Seat belts  
Remove impurities with a soft cloth and mild soap  
solution.1)  
1)  
A mild soap solution consisting of 2 tablespoons of white neutral soap to 1 litre of lukewarm water.  
150 Maintaining and cleaning › Exterior  
Wash with a pressure washer  
NOTICE  
After hand washing  
Rinse the vehicle and wipe it with a suitable clean  
cloth.  
Follow the operating instructions for the high-  
pressure cleaner, in particular the instructions re-  
lating to the pressure and the spray distance to the  
vehicle surface.  
Vehicle paint  
Preserve the varnish at least twice a year with hard  
wax.  
Do not direct the water jet directly at the following  
vehicle parts  
Use a polish for matt lacquers.  
Films  
Films  
Lock cylinder  
Films will age and become brittle – this is entirely  
normal: this is not an error.  
Columns on the vehicle  
The following factors have a negative effect on the  
life or colour fastness of the films:  
Trailer connection  
Swivelling ball bar  
Sun rays  
moisture  
Air pollution  
Camera lenses and sensors  
Plastic, chromed and anodised parts  
Remove snow and ice  
NOTICE  
Stones, e.g. due to the rebound of the cargo during  
transport on the roof rack  
Remove snow and ice with a plastic scraper or a  
suitable deicing agent.  
Clean the cameras with a hand brush.  
Only move the scraper in one direction.  
Do not use scratchers or other sharp objects for  
foils.  
Protection of hollow spaces  
Corrosion-prone cavities of the vehicle are perma-  
nently protected by preservative wax at the factory.  
Remove spilled wax with a plastic scraper, clean  
stains with mineral spirits.  
Underseal  
Do not remove snow and ice with hot or warm wa-  
ter.  
Do not remove snow and ice from surfaces with  
coarse dirt.  
The underside is permanently protected by the fac-  
tory against chemical and mechanical influences.  
Have the protective coating checked by a special-  
ist garage before starting and at the end of the  
cold season.  
Instructions for cleaning  
Handwash  
Wash the vehicle from top to bottom with a soft  
sponge or wash glove and plenty of water, if nec-  
essary with additional suitable cleaning agents.  
For foils and headlights, use a mild soap solution  
that contains two tablespoons of white neutral  
soap to one litre of lukewarm water.  
Use a glass cleaner for the windscreen wiper  
blades.  
Wheels  
After washing, preserve the wheels with suitable  
means.  
WARNING  
Risk of an accident!  
Severe dirt on the wheels can result in the wheels  
unbalancing.  
Car jack  
If necessary, treat moving parts with suitable  
grease.  
Wash the cameras with clean water and dry with a  
suitable clean wipe.  
Tow hitch  
Coat the ball head of the towing device with a suit-  
able grease whenever necessary.  
NOTICE  
Wash out the sponge or wash mitt regularly.  
Use a different sponge for wheels, sills and the  
lower part of the vehicle than that used for the  
other vehicle parts.  
Do not wash the vehicle in the blazing sun.  
Do not dry the headlights or use sharp objects.  
Do not put pressure on the bodywork when wash-  
ing.  
The temperature of the washing water may be a  
max. 60 °C.  
Maintaining and cleaning › Ice scraper 151  
Ice scraper  
Technical data and specifications  
On the fuel filler flap  
Requirements for the technical data  
The emission standard, information on fuel con-  
sumption and other information pertaining to your  
vehicle can be found listed in the technical vehicle  
documentation and in the declaration of conformity  
(in the so-called COC Document).  
The information listed was determined in accord-  
ance with rules and under conditions that are stipula-  
ted by legal or technical regulations.  
This and other information about your vehicle and  
the declaration of conformity can be obtained from a  
ŠKODA Partner.  
The details in the technical vehicle documentation  
and in the declaration of conformity take prece-  
dence over the information in this Owner's Manual.  
These specifications and values apply to your vehicle  
in its condition and configuration at the time of deliv-  
ery from the manufacturer. Retrofitting an accessory  
can have a negative impact on this information and  
values, in particular the values regarding fuel con-  
sumption and carbon dioxide (CO2), which are speci-  
fied in the vehicle documentation and in the declara-  
tion of conformity.  
The performance values listed were determined  
without performance-reducing equipment, e.g. air  
conditioning system.  
Vehicle identification data  
Vehicle identification number (VIN)  
The vehicle identification number is found at the fol-  
lowing locations:  
Directly in the engine compartment on the suspen-  
sion turret  
On a plate under the windscreen in the lower left  
corner  
On the type plate at the bottom of the middle  
body pillar of the vehicle  
Type plate  
A
B
Vehicle manufacturers  
Vehicle identification number (VIN)