134 Driver assist systems › Pedestrian detection system
Activation/deactivation in the instrument cluster
Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
braked.
Press the button on the multifunction steering
wheel.
›
Select Front Assist
.
›
Activation/deactivation in Infotainment
In the menu
.
Operating conditions
Show system deactivation in the display of the in-
strument cluster
✓ Front Assist is deactivated.
✓ The vehicle speed is 5-60 km/h.
illuminates together with
or
Speed limiter
Functionality
illuminates together with
The speed limiter controls the maximum driving
speed according to the set speed limit.
Deactivate Front Assist when handling the vehi-
cle on a truck, a car ferry etc.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Troubleshooting
Status display in the instrument cluster display
illuminates - the cruise control is activated.
flashing - the set limit is exceeded
Front Assist is not available
illuminates together with
When the regulation starts
set limit is displayed.
highlighted and the
Or:
illuminates together with
Operating conditions
Clean the front radar sensor.
Stop the engine and start again.
If Front Assist is still unavailable, check the brake
lights on the vehicle or on the attached trailer.
›
›
✓ The driving speed is higher than 30 km/h.
›
Operation
If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
rage.
›
Variant without cruise control
There was an unfounded warning or system inter-
vention
Clean the front radar sensor.
If the system is not working properly, disable Front
Assist and seek the help of a specialist garage.
›
›
Pedestrian detection system
Functionality
A
Activate limiter (control inactive)
Deactivate limiter
Pedestrian recognition helps to prevent a collision
with crossing or lengthwise moving pedestrians by
enabling automatic braking interventions.
Interrupt control (sprung position)
Resume control1) / Increase limit
B
Status display in the instrument cluster display
or
lights up - Danger of collision
C
Start control with current speed / Reduce
limit
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
1)
If no speed limit is set, the current speed is set as the speed limit.
English 
