Get Infotainment Amundsen Guide for Skoda Kamiq SUV First Generation (2018-2026)

Infotainment Amundsen › Infotainment overview 89

Turn on the Infotainment Wi-Fi hotspot in the

›

Infotainment Amundsen

menu item

Wi-Fi Wi-Fi hotspot.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

Infotainment overview

Enter the required password.

›

With some mobile devices, communication be-

tween the device and the Infotainment in the noti-

ﬁcation bar of the mobile device must be con-

ﬁrmed.

Tap on

mobile devices.

›

From the list of available devices, select the de-

sired device with the symbol.

MirrorLink - Disconnect

In the MirrorLink menu, tap on

.

›

Tap on

.

A

Touchscreen

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

All menus

Favourite menus

Increase volume

Reduce volume

Depending on the status:

Tap on

.

›

Select the desired device or connection type.

Infotainment switched oﬀ

▶

Tap: Turn on Infotainment

Infotainment switched on

▶

Tap: Switch sound oﬀ/on

▶

Hold: Switch oﬀ Infotainment

Radio menu

Media menu

Phone menu

Navigation menu

Information about vehicle settings

System

Limitation

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

The Infotainment system indicates this by means of

a message in the screen.

Basic settings

Setting basic functions

The following Infotainment functions are set in the

menu:

Time and date

Language

Units

▶

90 Infotainment Amundsen › Screen

Restore factory settings

Set up menu MENU

The position of the functional surfaces in the MENU

menu can be customized as follows:

▶

Sound settings

The Infotainment sound is set in the menu

.

Press and hold the desired functional surface until

it is free.

›

The following menu items can be set:

Setting the equalizer

Adjusting the volume ratio

Volume adjustment of individual Infotainment

functions

▶

Move the functional surface to a diﬀerent position.

›

Troubleshooting

The volume can be adjusted on e.g. one of the fol-

lowing menu items:

Infotainment not responding

If the infotainment does not respond, restart it as

follows:

▶

Volume adjustment of voice commands

▶

Setting the maximum volume when Infotainment

is turned on

Speed-dependent volume setting

Hold for longer than 10 s.

Wait for the restart to complete.

›

▶

Setting the Infotainment to mute with the park-

System update

ing aid switched on

Depending on the equipment, the following ad-

vanced sound settings can be set

We recommend having the system update carried

out by a specialist company.

Setting space optimisation

Setting the audio proﬁles according to genre

Adjusting the subwoofer volume

▶

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

Determine system version

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

Tap

System information.

›

The conﬁguration assistant is automatically displayed

if the ignition is switched on and if there are at least

two menu items that have not been set up after

switching on the Infotainment.

Screen

Overview

To switch oﬀ the automatic display, when the

conﬁguration assistant is displayed tap Don't show

›

again

.

For manual display tap

Conﬁguration wizard

.

›

Set up menu HOME

To display another page of the HOME menu, press

the screen with two ﬁngers and drag it to the left

or right.

›

To add the preferred menu, proceed as follows:

A

B

Status bar

Tap on an empty functional surface.

›

Bar with the functional surfaces of the displayed

menu

Or:

Press and hold an occupied functional surface and

then tap on an empty functional area.

Select a menu with the desired dimension of the

functional surface.

›

C

D

Display of the control centre

Other pages of the menu

›

Tap on to exit edit mode.

›

Operation

To remove the preferred menu, proceed as follows:

NOTICE

Danger of screen damage!

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

Press an occupied functional surface.

›

Tap on

.

▶

Tap on to exit edit mode.

Infotainment Amundsen › Infotainment keyboard 91

In principle, operation by touch is identical to the op-

eration of a mobile phone.

Gesture control is ach-

ieved by slowly moving

the hand back and

forth approximately 8

cm above the lower

edge of the screen.

›

The following operating modes are speciﬁc to the In-

fotainment system.

Dragging up or down with two ﬁngers

Depending on the set-

ting, a recognized ges-

ture can be conﬁrmed acoustically and animated.

Quickly review the list

of phone contacts

Switch 2D/3D map dis-

play

▶

Displaying operation help

Tap on

.

›

Dragging left or right with two ﬁngers

Display next page of

Settings

The following basic screen functions are set in the

▶

the HOME menu

menu

Screen:

Brightness level of the screen

Switch oﬀ the screen

Display the time

▶

Conﬁrmation sounds and animations

Pulling apart with two ﬁngers

Enlarge image

Zoom into the map

▶

Infotainment keyboard

Keypad overview

The arrangement of the keyboard characters de-

pends on the set infotainment language.

Depending on the context, the following types are

used in infotainment:

Pulling together with two ﬁngers

Alphanumeric

Numeric

Keyboard for input

Keyboard for search

▶

Minimize image

Zoom out of the map

▶

Turn two ﬁngers

Rotate image

Rotate the map

▶

Keypad example

Contactless gesture control

The Infotainment menus marked with the symbol

can be controlled by hand gestures.

A

Input line

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters one after the oth-

er

▶

Display functional surfaces for moving the

cursor in the input line

▶

Move cursor to the left

92 Infotainment Amundsen › Voice control

▶

The entry to be searched for can be entered includ-

ing diacritics.

Move cursor to the right

B

Entries found

The keyboard will only provide characters that

match the stored entries.

▶

Show list

C

Keypad functional surfaces

▶

To display searched entries tap

.

›

Change to lowercase

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

▶

Switch to ﬁrst having an upper-case letter,

followed by lower-case letters

▶

Switch to uppercase

Tap or repeatedly tap the ﬂag symbol until the

desired language keypad is displayed.

›

▶

/

Switch to the language keypad

Switch to the numeric and character key-

pad

▶

Further character variants

Press and hold the sign with the symbol

Select the desired symbol.

.

›

▶

/

Switch to other character variants

›

Show additional keyboard languages

Insert spaces

The next line

Setting up additional keyboard languages

Tap

Hold: Show more character variants

Show password

Additional keypad languages

.

›

Conﬁrm the entered characters

Voice control

Functionality

Numeric keypad

Voice control principle

Voice control works according to the principle of

dialogue between the user and the Infotainment sys-

tem.

The user says a voice command. The Infotainment

system responds or executes the voice command.

Advanced voice control

The vehicle's advanced voice control enables the ve-

hicle functions to be searched and operated online.

Keypad example

Advanced voice control understands ﬂuent whole

sentences. You do not need to use set commands or

phrases.

A

Input line

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters

The advanced voice control can, for example, search

for special destinations or dictate SMS messages if

the connected telephone makes this possible.

B

Keypad functional surfaces

This function allows you to combine the search in

the online and oﬄine data of the Infotainment. The

transition between online and oﬄine search is seam-

less and imperceptible to the user.

▶

Conﬁrm the entered characters

If it is possible depending on the context, alpha-

numeric characters can be entered by holding a

function area with the number.

Operating conditions

Operation

✓ Ignition on

✓ Infotainment switched on

The Infotainment keypad is used to enter characters,

letters and numbers.

Operating conditions for advanced voice control

To use the advanced voice control, the following

conditions must also be met:

The keypad will be automatically displayed when In-

fotainment prompts for characters.

Find

✓ The vehicle supports the function.

When entering characters, corresponding entries are

searched for.

Infotainment Amundsen › Voice control 93

Ending voice control

✓ The vehicle has Infotainment and functions that

can be controlled by the advanced voice control.

✓ The ŠKODA Connect services are active.

Press the

button on the multifunction steering

›

wheel twice.

✓ The vehicle is within range of a contractual mo-

bile network, through which the connection to

ŠKODA Connect Services is ensured.

Or:

Say the voice command “cancel” during voice com-

›

mand input.

✓ The level of protection of personal data is set to

Share my position

.

Restriction

Requirement for recognition of the activation

command

For some Infotainment languages, there is no voice

control available. The Infotainment system will indi-

cate this.

✓

Activated menu item

Voice control Active

The messages are generated by Infotainment. Flaw-

less clarity (e.g. road or city name) cannot always be

guaranteed.

Operation

Switch on voice control

Press the

wheel.

button on the multifunction steering

›

You cannot use voice control while a phone call is in

progress.

Or:

Say the activation command “OK Laura”.

›

Settings

After switching on, the icon is displayed in the sta-

tus bar.

The following voice control functions are set in the

menu

Voice control:

Enter voice command

Conﬁrmation tones

Enable/disable use of the activation word.

▶

Speak a voice command with voice control switch-

ed on.

›

During recognition of the voice command, the icon

is displayed.

Self help

The Infotainment system then executes the voice

command or plays the message. During the message,

the icon is displayed.

Starting acoustic help

If the Infotainment system is expecting a voice

command, say “Help”.

›

After the execution of the voice command, voice

control is switched oﬀ.

The “Help” voice command can be issued repeatedly

for further tips on voice control.

Correcting a voice command

Displaying the help

During voice command input, press the

on the multifunction steering wheel and say a new

voice command.

button

›

Tap on

.

›

Or:

If Infotainment is expecting a voice command, say

›

Stopping voice control

Stopping leaves more time for voice command input,

e.g. for searching for a phone contact.

“Overview”.

Switch example voice commands display on / oﬀ

The system oﬀers the option of displaying example

voice commands after switching on the voice con-

trol in the Infotainment screen.

Move your ﬁnger up or down over the Infotain-

ment screen.

›

Or:

To turn

tainment system

voice control on/oﬀ, tap Show in Info-

›

Say the voice command “pause”.

›

.

Resuming stopped voice control

Press the

wheel.

button on the multifunction steering

›

Or:

Tap on in the Infotainment screen.

›

Stopping the played back message

Press the

wheel.

button on the multifunction steering

›

94 Infotainment Amundsen › Control Centre

Or:

Tap

Control Centre

Overview

.

›

Analogue and digital radio player

› ^ATap and select the desired frequency range.

Display of the control centre

Press the bar at the

›

Tap and search for or select the desired station.

›

top of the screen and

drag down.

Tap on

.

Closing the control centre

Tap on

.

›

Or:

Wait 5 seconds.

›

Control Centre

The Infotainment control centre can be used for

quick access to the following functions:

A Select source

B Station name

C Information about the broadcast content

D Station logos

List of available stations

Show favourites

Information about the station

Search stations manually (valid for AM and FM)

Settings

List of available analogue and digital radio stations

A

Display and administration of functional surfaces

of preferred features

Tap on

.

›

Played station

Station stored on the presets

A traﬃc radio station is set

The DAB transmitter emits images which are

displayed in the information to the station

Manual update of the station list

B

C

D

E

Display list of informational messages

Preferred functions

Display user account management

Setting the personal data protection level

Setting the instrument and key illumination

F

In the station list, information about the programme

type and the channel identiﬁcation of the regional

channel can be displayed.

Set functional areas of preferred features

Web radio player

› ^Atap and select a web radio station.

To display editing mode hold any function surface

of the preferred feature.

To add the preferred feature, move the desired

feature from the top of the screen to the function-

al surface at the bottom of the screen.

›

Tap and search or select web radio.

›

Tap on

.

To close edit mode, tap on

.

›

Radio

Overview

Display menu

Tap

.

›

Infotainment Amundsen › Radio 95

A Select source

Search for web radio stations and podcasts

B Station name

Recently played web radio stations and podcasts

C Information about the broadcast content

D Station logos

100 most popular web radio stations depending

on the Infotainment language that has been set

Go to podcasts and select

List of web radio and podcasts

Show favourites

Search for and select web radio stations and pod-

casts based on the selected country

Information about the programme as well as the

broadcast content of the web radio

Search for and select web radio stations and pod-

casts based on the selected language

Settings

Search for and select web radio stations and pod-

casts based on the selected genre

Podcast player

See list of related podcasts based on content lis-

tened to

› ^TapA and select an online radio station.

Tap and search for or select the desired pocast.

›

See list of related podcasts based on content lis-

tened to

Tap

.

›

The podcasts are shown in the displayed lists

with the icon

List of favourite stations and podcasts

In the menu Radio, tap on

.

›

A Select source

B Podcast name

C Information about the broadcast content

D

Podcast logo with the symbol

Tap: Start playback

A

Select source

Radio text

Tap: Pause

B

Tap: Go back 15 secs

C

Station buttons for favourite stations and pod-

casts

Tap: Go forward 15 secs

View episodes of the podcast being played

List of web radio stations and podcasts

Show favourites

Operation

Select station

Show information about the podcast

Settings

List of web radio stations and podcasts

Tap on

.

›

Tap or at the top of the screen.

›

96 Infotainment Amundsen › Radio

SCAN function

Hold the line with the name of the desired station

or podcast.

Tap the desired preset button.

›

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

With podcasts, it is not possible to save the indi-

vidual episodes.

To start automatic play

To stop automatic play, tap

, tap Scan.

.

›

Deleting favourites

Find stations manually

Manual search is available for AM and FM stations.

In the menu Radio

Delete memory entries

.

›

To delete a station button for preferred stations,

tap the desired station button and conﬁrm the de-

letion.

To display the

tion, turn on menu item

functional surface for the FM sta-

›

Advanced settings Station dis-

play: FM switch on

To delete all station buttons for preferred stations

Clear all and conﬁrm the deletion.

›

In the Radio main menu, tap

To search in sequence, tap or next to the dis-

played frequency range scale.

.

›

Functional surfaces

dios

for analogue and digital ra-

Or:

Hold down the scroll mark on the frequency range

scale and move it to the desired value.

Applies to AM, FM and DAB frequency ranges.

›

The variant for changing stations using the function

surface

in the Radio menu is set as follows:

In the menu Radio

Arrow buttons:

.

›

Select the variant for switching between the sta-

tions stored on the station buttons or the stations

stored in the list of available stations.

Limitation

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Car parks, tunnels, tall buildings or mountains can

restrict radio reception.

In the rear side windows, there are antennas for re-

ceiving the radio signal.

▶

Functional areas

podcasts

Applies to web radio stations and podcasts.

for web radio stations and

The variant for changing stations using the function

surface

in the Radio menu is set as follows:

Covering the panes with foils or metal-coated la-

bels may aﬀect the reception of the radio signal.

The ŠKODA AUTO company assumes no responsi-

bility for the availability, correct functioning and

broadcast information of the RDS service.

In the menu Radio

Arrow buttons:

.

›

Select the variant for switching between the sta-

tions stored on the station keys or the last web

stations and podcasts listened to.

▶

Switch traﬃc reception (TP) for stations on/oﬀ

Applies to FM and DAB frequency range.

Settings

In the menu Radio

Traﬃc program (TP)

.

›

Save the station currently being listened to as a fa-

vourite from the Radio main menu

Assign station logo from the Infotainment memory

Applies to the FM and DAB frequency ranges.

Hold the desired station key for preferred stations

until the station is stored.

›

Infotainment oﬀers the option of assigning logos,

which are stored in the Infotainment memory, to the

stations.

Save station to favourites from the list of available

stations

Applies to AM, FM and DAB frequency ranges.

In the menu Radio

Select the desired station and logo.

Station logos

.

›

Hold the line with the name of the desired station.

Tap the desired preset button.

›

Switching oﬀ the station logo display

Applies to the FM and DAB frequency ranges.

Save channels from the list of web radio stations

and podcasts

Valid for web radio stations and podcasts

In the menu Radio

To select the desired station. No station logo

Station logos

.

›

.

Select a web radio station as the playback source.

Tap on

Go to the desired web radio station or podcast and

select it.

›

Activating / deactivating automatic station logo

assignment

Applies to the FM and DAB frequency ranges.

.

Infotainment Amundsen › Media 97

When the function is switched on, a station logo

from the Infotainment memory is assigned when the

station is stored on a preset.

Displaying FM / DAB stations or FM stations in the

list of available stations

Applies to the FM and DAB frequency ranges.

Depending on the following setting, the stations of

the selected frequency range are displayed in the list

of available stations.

In the menu Radio

Advanced settings Tap Automatic selec-

›

tion of station logos

.

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

In the menu Radio

Select one of the following menu items:

Advanced settings Station display:

.

›

▶

When the function is switched on and the station

buttons are displayed, you can see more information

about the content broadcast from the station to

which you are listening.

FM/DAB - the list shows available FM and DAB sta-

tions.

FM - the list shows available FM stations.

▶

In the menu Radio

Radio text

.

›

Sound quality of web radio stations and podcasts

Applies to web radio stations and podcasts.

Regional FM station logo

Applies to the FM frequency range.

To adjust the sound quality, in the Radio menu tap

›

on

Audio quality:

.

Infotainment provides the option of using country-

speciﬁc FM station logos.

Choose low or high quality.

›

The quality you set aﬀects the amount of data used

in the data connection.

In the menu Radio

Advanced settings Region for station

›

logo:

.

Choose country.

›

Quality also depends on the speed and availability of

the data connection.

Switching additional announcements of the DAB

transmitter on / oﬀ

Applies to the DAB frequency range.

If playback failure occur, reduce the sound quali-

ty.

When the function is switched on, other announce-

ments are received as traﬃc announcements. These

include e.g. weather news, sports reports, ﬁnancial

news etc.

Media

What you should be mindful of

In the menu Radio

Advanced settings Tap Additional DAB

›

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

announcements

.

Switch RDS on/oﬀ

Applies to the FM frequency range.

The menu item is only available for some countries.

In the menu Radio

Advanced settings Radio Radio Data

›

System (RDS)

.

If the RDS function is disabled, the following menu

items in FM station settings are not available:

Traﬃc program (TP)

Radio text

RDS Regional

Automatic frequency change (AF)

Regional station logo.

▶

Overview

Switch automatic switching to a similar DAB trans-

mitter on / oﬀ

Applies to the DAB frequency range.

Display menu

Tap

.

›

When the function is switched on and there is signal

loss from the DAB station being listened to, Infotain-

ment automatically sets another DAB station with

similar content.

Or:

Tap

.

›

In the menu Radio

lar station if weak reception

Advanced settings Tap Switch to a simi-

›

.

98 Infotainment Amundsen › Media

Music player

Tap: Start playback

Tap: Pause

Within 3 seconds of starting playback, tap: play

the previous song

After 3 seconds from the start of playback, tap:

to play the current title from the beginning

Hold: fast rewind within the track

Tap: play the next track

Hold: fast forward within the track

A Choose source

Movement within the title is also possible by drag-

ging the ﬁnger over the timeline.

Manage ﬁles / multimedia database

Show favourites

Advanced operation

Turn on / oﬀ repeat playback of the current

track

Turn on / oﬀ repeat playback of the current al-

bum / folder

Turn on / oﬀ random playback of the current al-

bum / folder

Details about the track being played

Settings

Video player

Save the played track in the “My playlist” playlist

“My playlist” management

▶ To display the playlist, tap

.

▶ To manage the playlist tap in the displayed play-

list.

The following activities can be carried out in playlist

management:

Control playback.

Change the order of a title in the list by holding and

moving to the desired position.

▶

A Select source

Manage ﬁles / multimedia database

Show favourites

Delete title.

▶

Show video

Restriction

Shrink image display

Enlarge the image display

Settings

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

Player controls

Settings

Operation - Basics

Manage favourites

A Album image / symbol of the connected source

To save, hold the desired functional area for fa-

vourites A .

›

Tap: list available albums

▶

Infotainment Amundsen › Media 99

To delete all favourites tap on Clear all and conﬁrm

the deletion.

› ^{Choose one of the available list entries}B .

›

To Clear, in the menu media

tap on Manage favour-

›

ites

.

Traﬃc

To turn on/oﬀ traﬃc monitoring during playback

of media ﬁles, go to the Media in the main menu

›

To delete a favourite, tap on the list entry and con-

ﬁrm the deletion.

›

and tap on Traﬃc program (TP)

.

Or:

Supported sources and ﬁles

Supported sources

Source

Interface

Type

Speciﬁcation

File system

USB stick

HDD

(without special

software)

USB devices that

use the USB mass

storage support

protocol

Devices running

the Android or

Windows Phone

operating system

that support the

Media Transfer

Protocol

MSC

MTP

VFAT

FAT16

FAT32

exFAT

NTFS

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

Devices with the

iOS operating sys-

tem and the iAP2

protocol

Bluetooth® proto-

cols

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

A2DP and AVRCP

(1.0 - 1.6)

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code:

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

100 Infotainment Amundsen › Media

Supported audio ﬁles

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

MPEG 1 Layer 2

MPEG 2 Layer 2

MPEG 1 Layer 3

MPEG 2 Layer 3

MPEG 2.5 Layer 3

Windows Media

Audio 7

Windows Media

Audio 8

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

32 - 384

8 - 160

32 - 320

32, 44, 48

16, 22, 24

32, 44, 48

16, 22, 24

8, 11, 12

Mono, stereo,

Joint stereo

Mono, dual mono,

Stereo, Joint

Stereo

mp2

mp3

MPEG

8 - 160

6 - 192

8 - 384

8 - 768

8 - 320

32 - 768

8, 16, 22, 32,

44, 48, 96

8, 11, 16, 22,

32, 44, 48,

96

Mono, stereo,

Joint stereo

WMA

ADTS

wma

aac

Windows Media

Audio 10

32, 44, 48,

96

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

8, 11, 12, 16,

22, 24, 32,

44, 48, 64,

88, 96, 192

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

AAC LC

16 - 2048

Stereo

AAC HE

AAC HEv2

M4A LC

16 - 400

16 - 64

8 - 576

MP4

OGG

FLAC

m4a

ogg

ﬂac

M4A HE

M4A HEv2

Mono,

Stereo

OGG-Vorbis

FLAC

Mono, stereo,

Joint stereo

-

Mono,

Stereo

RIFF

Monkey's

SBC

WAV

wav

ape

-

64 - 3072

8 - 192

Monkey's

8, 11, 12, 16,

22, 24, 32,

44, 48

Mono, stereo,

Joint stereo

Bluetooth A2DP

8 - 345

Mono, stereo,

Multichannel

OPUS

opus

6 - 2000

8 - 48

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported video ﬁles

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

mpg

mpeg

m1v

mPV

mpg

mpeg

ps

MPEG 1

1.5

15

MPEG 2

m2v

Infotainment Amundsen › Images 101

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

MPEG 4 (H.264)

MPJEG

m4p

mp4

m4v

mp4v

mov

Xvid

wmv

asf

50

MPEG 4 (ISO)

Xvid

20

50

WMV9

Supported playlists

Codec type

File extension

M3U

M3U8

PLS

m3u

m3u8

pls

WPL

ASX

wpl

asx

A

B

View images

Images

▶

Show the next image

Overview

Show the previous image

Start slideshow

Display menu

Tap

.

›

Stop slideshow

Image viewer

View image

▶

Turn left

▶

Turn right

▶

Show in output size

Gesture control

Display of the next im-

age

▶

A Select source

Manage ﬁles

Settings

Display the previous

image

Operation

Operation using functional areas

Increase the image size

102 Infotainment Amundsen › Mobile device management

These components have security mechanisms that

minimise the risk of unauthorised access to the vehi-

cle systems.

Reduce the image size

▶

Regular software updates help reduce the risk of un-

authorised access to vehicle systems and vehicle

functions. The following guidelines must therefore

be observed:

Use only media carriers, Bluetooth® devices, and

mobile devices that contain no harmful data or

malware.

Rotate by 90 °

›

▶

Regularly update the software provided by ŠKODA

AUTO.

›

We recommend having the system software and

components updated by a specialist company.

WARNING

Risk of an accident!

Settings

Malware in the vehicle can inﬂuence and deactivate

certain vehicle functions, or take over the controls of

these where applicable.

The following Infotainment functions are set in the

menu:

Display image size

▶

If the vehicle reacts in an unusual way, immediately

reduce speed or stop the vehicle.

▶

Display image duration during the slideshow

Slideshow repeat

Seek the help of a specialist garage.

▶

WARNING

Malware in the vehicle may gain unauthorised access

to the information and data of the vehicle, and on oc-

casion, to connected mobile devices.

Supported sources and ﬁles

Supported sources

Source

Interface

Speciﬁca- File system

tion

Overview

USB 1.x; 2.x USB stick

VFAT

FAT16

FAT32

exFAT

NTFS

3.x

or higher

with USB

HDD

(without

special

Using mobile device management, devices can be

connected, disconnected, and interchanged.

USB

Display mobile device management

2.x support software)

Tap on

Manage mobile devices.

›

Supported ﬁles

Codec type

File extension Max. resolution

[Mpx]

BMP

bmp

4

JPG; JPEG

jpg; jpeg

4 (Progressive

Mode)

64

GIF

gif

4

PNG

png

4

The maximum supported image size is 20 MB.

The device enables a connection via the Blue-

tooth®“hands-free proﬁle”

The device is connected via the Blue-

tooth®“hands-free proﬁle”

The device enables a connection via the Blue-

tooth® audio proﬁle

The device is connected via the Bluetooth® audio

proﬁle

Remove the device from the list previously con-

nected devices

Mobile device management

Cybernetic security

Your vehicle contains components that are used to

exchange information and data between the vehicle

and the connected mobile devices or the Internet.

Infotainment Amundsen › Mobile device management 103

The device enables a SmartLinkconnection to be

made via Android Auto

The device enables a SmartLinkconnection to be

made via Apple CarPlay

Information about ŠKODAapplications

Detailed information about ŠKODA applications can

be found on the website after reading the following

QR code or link:

The device enables a SmartLinkconnection to be

made via MirrorLink

http://go.skoda.eu/mobile-apps

Connected / Previously connected devices

A

B

Available devices

Limitations of mobile devices and applications

Connection set-up

Availability of features

Connect a mobile device to Infotainment

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

Find available Bluetooth® devices in the mobile de-

›

vice.

Select the Infotainment Bluetooth® unit.

›

Compatibility of mobile devices

The unit name can be determined by tapping

It is possible to check the ŠKODAweb pages to see if

Infotainment is compatible with the selected mobile

device being tested. This check is carried out by us-

ing the following reference or by reading the QR

code:

Manage mobile devices

device name:.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Connect Infotainment to a non-paired mobile de-

vice

http://go.skoda.eu/compatibility

Manage mobile devices

Select the desired device from the list of available

devices.

.

›

Select the desired Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

All information given is incidental and serves as in-

formation.

If two devices are connected to the Infotainment,

select the device to be replaced.

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

›

Connect Infotainment to a previously connected

mobile device

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

Manage mobile devices

.

›

Or:

Select mobile phone

.

›

Select the desired device from the list of previous-

ly connected devices.

Select the desired Bluetooth® proﬁle.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Applications in mobile devices

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

SmartLink connection

Infotainment provides the ability to connect Smar-

tLink to compatible mobile devices using the follow-

ing connection types:

Due to the variety of applications, as well as their on-

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Android Auto

Apple CarPlay

MirrorLink

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Mobile devices can be connected to the Infotain-

ment via USB cable or Wi-Fi, as long as the mobile

device supports it.

104 Infotainment Amundsen › Telephone

Connect the mobile device to the Infotainment via

a USB cable or browse and connect to a wireless

network.

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

›

Tap the icon of the supported connection.

›

Telephone operation

Enter telephone number

Telephone

Overview

In the Phone menu, tap on

Enter the telephone number using the numeric

keypad that is displayed.

.

›

Display menu

Tap

.

›

The displayed numeric keypad can also be used

for searching for contacts.

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

Or:

Tap

.

›

If the menu phone is not displayed, check wheth-

er the mobile device is connected.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

To display the contact list in the phone menu, tap

›

on

.

To search within the list, tap on Enter contact

Enter the details you wish to ﬁnd.

.

›

To establish a connection with a contact, tap the

functional area showing the desired contact.

If a contact has multiple telephone numbers, select

the telephone number from the displayed list.

A Name of the connected telephone

Tap: Show list of previously connected phones

▶

To display the details for a contact, tap

.

›

B Name of telephone service providers

Establish a connection to the voice mailbox num-

ber

▶

If the symbol is displayed in front of the name,

roaming is active.

In the Phone menu, tap on

.

›

C Preset buttons for preferred contacts

Telephone conversation

Depending on the context of the telephone conver-

sation, the following functions can be selected:

Change the main telephone with the additional

telephone

Enter telephone number

Contact list

End connection / reject incoming call / end call

Answer an incoming call / return to the held call

Text messages / emails

Call lists

Switch the ringer oﬀ / on

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

/

Settings

Reject an incoming call using an SMS message

Answer a call from the second telephone during

a call on the ﬁrst telephone

The ongoing call on the ﬁrst telephone is termi-

nated by accepting the call.

Conditions for connecting a telephone with

Infotainment

✓ The Bluetooth® function of the Infotainment and

To switch the call tone from the speakers to the

telephone, go to telephone in the menu and tap on

›

the telephone needs to be switched on.

The Bluetooth® function of the Infotainment is

speakerphone

.

switched on in the menu item

Manage mo-

To switch the call tone from the telephone to the

speakers, tap

bile devices

Bluetooth.

.

✓ Visibility of the Infotainment is switched on.

The visibility of the Infotainment is switched on in

the menu item

Manage mobile devices

Visibility

.

Infotainment Amundsen › Telephone 105

Send e-mails

Conference call

A conference call is a joint telephone conversation

with a minimum of three and a maximum of six par-

ticipants.

In the Telephone

menu, tap Emails

New

›

emails

.

Write an e-mail and conﬁrm that an e-mail is dis-

played.

›

Make the next call during an ongoing conversation/

conference.

›

The text can be edited when the text area within

the view is tapped.

Or:

Search for or select the recipient of the email.

Add more recipients or conﬁrm selected recipi-

ents.

›

Accept a new incoming call by tapping

.

›

To start a conference call, tap

.

During an ongoing conference call, the following

functions can be selected depending on the context:

Enter the subject of the e-mail.

›

Tap on Send

.

Hold the conference call and leave temporarily

(the conference will continue in the background)

Return to the held conference call

Show received e-mails

In the Telephone

menu, tap Emails

.

›

Select the desired e-mail.

Switch the microphone oﬀ / on

/

End conference call

Show details of the conference call

To switch graphic notiﬁcations regarding the re-

ceipt of a new email on or oﬀ, tap in the Phone

menu New message notiﬁcations

.

In the details of the conference call, depending on

the connected telephone, the following functions

can be selected:

Settings for Infotainment telephone functions

Show details of the conference call partici-

pants

End conversation with the conference call par-

ticipant

Conversation with a participant outside of the

conference call

Telephone-Infotainment-Connection types

The way in which the telephone is connected de-

pends on the number of phones currently connected

to the Infotainment:

No telephone - The telephone is connected as a

main telephone.

One telephone - The telephone is connected as an

additional telephone.

Two telephones - Select the telephone to be re-

placed.

▶

Send a text message

In the Telephone

menu, tap Messages

New

›

SMS

.

Write a text message and conﬁrm; a view of the

message is displayed.

›

To switch between the main telephone and the

additional telephone, tap on in the Phone menu.

›

The message can be edited when the text area

within the view is tapped.

Search for or select the recipient of the message.

Add more recipients or conﬁrm selected recipi-

ents.

›

Connect the telephone to Infotainment

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

›

Tap on Send

.

›

The unit name can be determined by the menu

item

Manage mobile devices

Device name:.

Display received text messages

In the Telephone

.

menu, tap Messages

or

›

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Messages that are received are displayed as indi-

vidual messages or as messages in a conversation,

depending on the following setting.

›

Connect Infotainment to a non-paired telephone -

no telephone is connected

Tap on

.

›

To switch the display of messages in a conversa-

Or:

tion on or oﬀ, tap in the Phone

menuShow messag-

Tap on

.

›

es as conversation

.

Follow the instructions in the Infotainment screen.

To switch graphic notiﬁcations regarding the re-

ceipt of a new message on or oﬀ, tap in the Phone

›

Connecting Infotainment to a non-paired tele-

phone - another telephone is connected

menu New message notiﬁcations

.

Tap on

Manage mobile devices.

›

Infotainment oﬀers the possibility to read the

text message (context-dependent) by means of the

generated Infotainment voice if is tapped.

Select the desired device from the list of available

devices.

106 Infotainment Amundsen › Wi-Fi

Select the desired Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

Depending on the type of telephone, import conﬁr-

mation may be required.

›

Update telephone contacts

The telephone is connected as an additional tele-

phone.

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

Or:

For manual update of the list in the phone

›

menu tap on Import contacts

.

If two telephones are connected to the Infotain-

›

ment, select the telephone to be replaced.

Sort contacts in the phone book

In the Telephone

sorting type.

menu Sort by: Tap and select the

›

Connect Infotainment to a previously paired tele-

phone

Manage mobile devices

.

›

Ringtone

Some phones do not allow the use of the telephone

ringtone; instead, the Infotainment ringtone is used.

Or:

Select mobile phone

.

For setting the Infotainment ringtone in the

›

Select the desired device from the list of previous-

ly connected devices.

›

phone

menu select the ringtone

.

Select the ringtone.

›

The telephone is connected as an additional tele-

phone.

Number for the voice mailbox

For setting the voice mailbox number in the

›

Or:

phone

menu Mailbox number:

.

If two telephones are connected to the Infotain-

›

Enter the voice mailbox number.

›

ment, select the telephone to be replaced.

Turn the graphic notice regarding receiving a new

message/email on or oﬀ

Manage preset buttons for preferred contacts

When the feature is on, the new message icon ap-

pears on the status bar and in the feature area for

the messages when a new message/e-mail is re-

ceived.

In the Telephone

menu New message notiﬁcations

.

›

Simultaneous calls

This applies to some countries.

Depending on the connected telephone, it is possible

to answer the next incoming call and hold the previ-

ous call.

› ^{To save the desired preset button, hold}A .

To switch on simultaneous calls, tap on telephone

Select a contact from the displayed list.

›

Parallel talks

.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

›

To display the menu for deletion, go to the phone

›

Wi-Fi

menu

and tap on Manage favourites

.

Functionality

To delete one preset, tap on the list entry and con-

ﬁrm the deletion.

The Wi-Fi can be used for the internet connection or

for the SmartLinkConnection.

Or:

To delete all station buttons, tap Clear all and conﬁrm

the deletion.

›

The Infotainment hotspot can connect up to 8 mo-

bile devices. At the same time, the Infotainment can

be connected to another hotspot.

Import telephone contacts

To display the list of connected mobile devices, tap

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

›

Wi-Fi Infotainment system as hotspot Connected devi-

ces.

Infotainment can import up to 5000 telephone con-

tacts together with contact pictures. Each contact

can include max. 5 telephone numbers.

Infotainment Amundsen › Wi-Fi 107

The password for connecting to the Infotainment

Overview of available hotspots

Display available hotspots

hotspot is taken from the menu item

Wi-

Fi Infotainment system as hotspot Network key

.

Tap

Wi-Fi Wi-Fi:.

›

Conﬁrm the connection.

›

Connect Infotainment to the mobile device hot-

spot

Turn on the Infotainment’s Wi-Fi unit in the menu

›

item

Wi-Fi WLAN: WiFi active switch on

Select the desired hotspot in the list of available

hotspots.

Enter the password for connecting to mobile devi-

ces.

Infotainment stores passwords for previously

connected hotspots.

A Previously connected hotspots

Security level of the Infotainment hotspot

The security level is set at WPA2 and cannot be

changed.

B Available hotspots

C The hotspot supports the WPS connection

Currently connected hotspot

Activate/deactivate data transfer between the In-

fotainment and the connected device

Delete information about the hotspot connection

Wi-Fi signal strength of the hotspot

The Wi-Fi signal from the hotspot is not available

To turn data transmission on or oﬀ, tap

Wi-Fi Infotainment system as hotspot Connected devices

›

.

Change the name of the Infotainment hotspot

▶ Tap

name:.

Wi-Fi Infotainment system as hotspot Network

Function restriction

Enter the name and conﬁrm.

▶

The Infotainment system can only be connected to a

hotspot with WPA2 access protection.

Change password for connection to Infotainment

hotspot

The password must be a minimum of 12 and a maxi-

mum of 63 characters.

Restriction of the Wi-Fi connection

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

▶

Wi-Fi Infotainment system as a hotspot Network key

Enter and conﬁrm the password.

.

Quick connection of Infotainment to the mobile

device hotspot

On the mobile device, turn on the hotspot, its visi-

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

›

bility, and the option for WPS connection.

Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button)

.

›

Settings

Automatic WPS connection

Connect a mobile device to the Infotainment hot-

spot

Tap

Wi-Fi Quick connection to Infotainment system.

In the mobile device, switch on the option for con-

nection via WPS.

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

›

Wi-Fi Infotainment system as hotspot

›

Use as hotspot

.

Turn on the Wi-Fi on the mobile device.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

›

Manual WPS connection

In the mobile device, switch on the option for con-

nection via WPS PIN.

›

The name of the Infotainment is taken from the

menu item

Network name:

The mobile device display will show the WPS PIN

for connecting to the Infotainment.

Wi-Fi Infotainment system as hotspot

.

Tap

Wi-Fi Quick connection to Infotainment system

›

Select the Infotainment hotspot and enter the re-

quired password.

›

WPS PIN

.

Enter the WPS PIN in the Infotainment and con-

ﬁrm.

108 Infotainment Amundsen › SmartLink

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

Automatic connection using the QR code

Wi-Fi Tap quick connection with infotainment system

In the mobile device, switch on the option for con-

nection via QR Code.

With the mobile device, read the QR code dis-

played on the Infotainment screen.

Wait for the connection to be established and, if

.

›

A

Previously connected device

necessary, conﬁrm the respective messages.

B Currently connection device

Tips for a perfect connection

Display information about SmartLink

Disconnection of the active connection

Settings in SmartLink menu

Keep only the hotspot to be connected switched

on and switch oﬀ the other hotspots.

Delete unused hotspots. This shortens the time re-

quired to establish a connection.

For some hotspots, the connection takes longer, so

wait for the connection to ﬁnish.

If the connection is interrupted, recheck the availa-

ble hotspots and repeat the connection.

▶

Android Auto

SmartLink

Functionality

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

Overview of running applications, phone calls, in-

coming text messages, and more.

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

Turn on voice control (Google Voice)

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

Apple CarPlay

Mobile devices can be connected via a USB cable or

WiFi.

Supported connection types

SmartLink supports the following connection types:

Android Auto

Apple CarPlay

MirrorLink

▶

A

B

List of available applications

Overview of the SmartLink connection

Menu SmartLink

Depending on the duration of operation:

Tap: Return to the menu Apple CarPlay

Hold: Turn on voice control (Siri)

▶

Tap

.

›

▶

Infotainment Amundsen › SmartLink 109

Conditions for MirrorLink

MirrorLink

✓ The device to be connected must have MirrorLink

connection.

A list of devices and applications that support the

MirrorLink connection can be found on the web-

sites of Car Connectivity Consorcium®.

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

It is not possible to operate the application while

driving

Operation

Return to the menu SmartLink

List of running applications

Operation of the running MirrorLink application

Display of control surfaces at the bottom

Display of control surfaces at the top

Return to the menu MirrorLink

Display of the last running application in connec-

ted mobile devices

Settings

Restriction

Connection conditions

Restriction of the Wi-Fi connection

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

General connection conditions

✓ The mobile device supports the type of Smar-

tLink connection Android Auto, Apple CarPlay or

MirrorLink.

✓ Mobile devices, as well as the type of SmartLink

connection, are supported in the respective mar-

ket.

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

✓ Some connected mobile devices require the mo-

Restriction of SmartLink applications while driving

For reasons of safety, the operation of some Smar-

tLink applications while driving is not possible or only

limited.

bile device to be “unlocked”.

Conditions for Android Auto

✓ The device to be connected must have Android

Auto connection.

Restriction of the navigation function

If route guidance is currently being carried out

through Infotainment, this is ended when you start

route guidance in the Apple CarPlay application.

A list of devices, supported regions and applica-

tions that support the Android Auto connection

can be found on the Google, Inc. website.

✓ The Android Auto application needs to be instal-

led on the mobile device.

✓ Some applications require the data connection in

If there is route guidance in the Apple CarPlay appli-

cation, it is ended by starting the destination guid-

ance using Infotainment.

the mobile device to be turned on.

✓ Connect the mobile device for the ﬁrst time

SmartLink settings

when the vehicle is stationary.

Apple CarPlay - Connection via USB

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlay connection.

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

A list of devices, supported regions and applica-

tions that support the Apple CarPlay connection

can be found on the Apple Inc website.

Choose to connect via Apple CarPlay.

›

✓ Siri voice control is on.

✓ The data connection in the mobile device is

Apple CarPlay - Connection via Wi-Fi from Info-

tainment

switched on.

Turn on Bluetooth® and Bluetooth® visibility in the

Apple mobile device.

›

Tap on

Manage mobile devices.

›

110 Infotainment Amundsen › Navigation

In the displayed list, look for and select the desired

✓ The minimum Android version is 5.

✓ No other mobile device can be connected via

›

device with the symbol

.

SmartLink.

Follow the instructions on the Infotainment screen

and conﬁrm the Bluetooth® pairing.

If another device is connected to the Infotainment,

select the device to be replaced.

›

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

In the Infotainment screen, select the connection

›

Apple CarPlay - Connect via Wi-Fi from mobile de-

vices

To establish a connection, the following conditions

must be met:

›

type Android Auto.

✓ The minimum iOS version is 9.

✓ No other mobile device can be connected via

Android Auto - Disconnect

In the Android Auto

DA”.

menu, tap “Return to SKO-

›

SmartLink.

✓ Wi-Fi and Bluetooth® functionality is switched on

Tap on

.

›

in the Infotainment system.

MirrorLink - Connection via USB

In the mobile device, turn on the CarPlay function.

›

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Press and hold the

steering wheel.

button on the multifunction

›

The Infotainment screen displays a connection

message with the name of the Bluetooth® unit of

the Infotainment.

Choose to connect through MirrorLink.

›

MirrorLink - Disconnect

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

In the Infotainment screen, select the connection

type Apple CarPlay.

›

In the MirrorLink menu, tap on

.

›

Tap on

.

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

Apple CarPlay - Disconnect

Tap on

.

In the Apple CarPlay menu, tap on the function

area “ŠKODA”.

›

Select the desired device or connection type.

Tap on

.

›

Android Auto - Connection via USB

Navigation

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Navigation announcements

›

Infotainment route guidance takes place using

graphic driving recommendations and navigation an-

nouncements.

Choose to connect via Android Auto.

›

Android Auto - Connection via Wi-Fi from Info-

tainment

The navigation announcements are generated by the

Infotainment system. Navigation announcement

clarity (e.g. road or city name) cannot always be

guaranteed.

Tap on

mobile devices.

›

Select the desired device from the list of available

devices.

Repeat the last navigation announcement

Select the Bluetooth®hands-free proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Tap on

.

›

Turn oﬀ navigation announcements

Tap on

.

›

If another device is connected to the Infotainment,

select the device to be replaced.

From the list of known devices, select the desired

›

Navigation overviews

Display menu

device with the symbol.

Android Auto - Connect via Wi-Fi from mobile de-

vices

Tap

.

›

To establish a connection, the following conditions

must be met:

Infotainment Amundsen › Navigation 111

Map overview

A Input line

A Vehicle position

B Route

B List of recently searched destinations

C POI categories

Tap: search for the selected category

›

C Route view

End route guidance

Show destination list

Enter destination via address / ﬁnd destination

D Display the destination input and route view

menu

Select the destination you are looking for

E Traﬃc obstruction

F Following driving recommendation

G POI

Enter the details for the destination search.

Select the desired destination.

›

Destination details are displayed with the option of

starting route guidance.

H Change map orientation

North-facing 2D map

2D map facing the direction of travel

3D map facing the direction of travel

▶

Selecting the destination entered via the address

Tap on

.

›

A menu for entering the destination via the ad-

dress is displayed.

I

Road signs for the aﬀected route section

Find destination

Enter the required information.

›

Destination details are displayed with the option of

starting route guidance.

Centre the map on the vehicle position

Display the settings menu

List of stored destinations

Tap on

Turn oﬀ navigation announcements

Repeat the last navigation announcement

.

›

J Display map in accordance with the following

setting

Auto - Map in day / night mode depending on the

▶

vehicle lighting currently switched on

Day - Map in day mode

Night - Map in night mode

▶

K Display navigation in the digital instrument clus-

ter

L

End route guidance

Show the entire route

Settings

A

List of stored destinations

B

Select category of stored destinations

▶

- Favourites

▶

- Last destinations

Map display in the digital instrument cluster

The map can be displayed in the digital instrument

cluster or on the Infotainment display.

▶

- Telephone contact destinations

Selecting the stored destination

Select the category of stored destinations.

Select the desired destination.

To change the display tap

menu.

in the Navigation

›

Find destination

Tap

Destination details are displayed with the option of

starting route guidance.

.

›

112 Infotainment Amundsen › Navigation

Recommended destinations

C

Route calculation

Tap on

.

›

Route calculation

A North-facing vehicle position

B Traﬃc obstruction

A Current vehicle position

B Proposed fastest route

C Alternative routes

Delete the recommended destination

The view can display up to 5 recommended destina-

tions in the following categories:

D Destination position

E 15 s time countdown before automatic start of

the route guidance

Destination – home address

Destination – business address

Favourites

▶

Tap: Interrupt time countdown

›

F Start route guidance

Last destinations

Show information on the selected route

Set parameters for route calculation

Destination alignment depends on the direction in

relation to the current vehicle position. The function-

al surface with the destination displays information

about the estimated travel time to the destination.

Route overview

Tap on

.

›

If the vehicle has active online services and there is a

traﬃc obstruction on the route to the destination,

the traﬃc obstruction icon will be displayed.

Delete the recommended destination

Touch the functional surface for the recommended

destination and swipe left.

›

Tap on

.

›

Selecting destination by tapping the map point

Tap the desired item or the POI icon in the map.

›

A

Information on current vehicle position

B

C

D

Final route destination

Tap: the following menu items can be selected:

Show on map

›

Stop route guidance

Route stopover

Tap: the following menu items can be selected.

Show on map

›

Add stopover destination

A

B

Show destination details with the following pos-

sible settings:

Destination provided by Infotainment on the

route

▶

- Save destination as a favourite

Tap: the following menu items can be selected.

▶

- Delete favourites

Show on map

›

▶

- Set destination as a starting point for

Delete

route guidance in demo mode

E

Traﬃc obstruction on the route

Start direct route guidance

Infotainment Amundsen › Navigation 113

Zoom out of the map

Tap: the following menu items can be selected.

▶

Show on map

›

Avoid

F

Route view

Changing route destinations

In the route overview, it is possible to exchange the

destination and the intermediate destinations with

each other and thus change their order.

Rotate the map

▶

Hold the line with the desired destination until the

functional surface for the destination becomes

free.

›

Move the destination to the desired position and

release the functional surface.

›

The route is re-calculated.

Limitation

Overview of traﬃc density

When ŠKODA online services are activated, traﬃc

density information can be displayed in the form of

the following colour scale in the route view F .

Infotainment may give incorrect driving recommen-

dations if the road conditions or the traﬃc do not

match the navigation data. This can lead to the route

guidance being carried out using a diﬀerent route or

proposing a change of direction in a one-way street.

Low density

High density

Traﬃc density information is not available

Information for updating the navigation data must be

requested from a ŠKODA partner.

Touch operation

Gesture control

Settings

Avoiding traﬃc obstructions

Move map

▶

If the function is switched on and the Infotainment

receives information about a traﬃc obstruction on

the route from online traﬃc information, the route is

recalculated.

Infotainment may suggest a detour to avoid traﬃc

obstructions, depending on the following settings:

Enter destination by

tapping the map item

Route guidance Tap on Avoid traﬃc incidents

Select the desired menu item.

.

›

Showing information on the destination / waypoint

The status line displays information on the distance

and travel time to the destination, depending on the

following setting.

Route guidance Show information for:

Select the desired menu item for the destination

type.

.

›

Switch 2D/3D map dis-

play

Showing arrival time information in the destina-

tion / driving time

The status line displays information on the travel

time depending on the following setting.

Zoom into the map

Route guidance Time display:

Select the desired menu item.

.

›

114 Infotainment Amundsen › Navigation

Switching display of country-speciﬁc speed limits

on / oﬀ

When the function is switched on, the country-spe-

ciﬁc speed limits are displayed when crossing nation-

al borders.

Switching demo mode on / oﬀ

In demo mode, the route guidance from the starting

point of the demo mode to the selected destination

is simulated.

When the function is switched on, Infotainment is-

sues a query before the start of route guidance as to

whether the route guidance should be carried out in

the normal way or in demo mode.

Tap

Route guidance Country information at border crossings.

›

Switching the display of road signs on motorways

and expressways on / oﬀ

When the function is switched on, Infotainment dis-

plays traﬃc and information signs on motorways and

expressways.

Tap on Basic functions Demo mode

.

›

Deﬁning the starting point of the demo mode

Select or locate the desired destination to be the

starting point of demo mode.

›

Tap

carriageways

Route guidance Information signs on motorways and dual

›

.

In the displayed destination details, tap More

.

›

Switching the fuel warning on / oﬀ

When the function is switched on and the fuel sup-

ply reaches the reserve area, a warning message ap-

pears with the option of going to the nearest petrol

station.

Updating the navigation database

Information for updating the navigation database

must be requested from a ŠKODA partner.

Tap

Route guidance Fuel warning.

›

Automatic update

Infotainment automatically carries out an update if

the following conditions are met:

Switching the speed limit warning on / oﬀ

Tap

Route guidance Road signs.

›

Set the note type and the value for exceeding the

permissible speed.

✓ The “Infotainment Online” online services are ac-

›

tivated.

✓ An update of the navigation database for the cur-

rent vehicle position or route destination is availa-

ble.

Settings for trailer operation

To calculate the correct route for trailer operation,

switch on trailer inclusion.

Determining the navigation database version

Tap

Route guidance Trailer Include trailer.

›

Tap

System information.

›

Set the maximum speed for trailer operation to cor-

rectly calculate the route time.

Tap

Route guidance Trailer Maximum speed for trailers.

›

Set the maximum speed for the trailer.

Setting navigation announcements

Tap

navigation announcements.

›

Select and set the desired menu item.

Show preferred POI categories

Favourite POI categories are displayed on the map

and provided in the destination search.

Tap

Basic functions Deﬁne preferred POI categories.

›

Set favourite categories.

Setting home address

The deﬁned destination of the home address is dis-

played in the overview of recommended destina-

tions.

Tap

Basic functions Enter home address.

›

Setting business address

The deﬁned destination of the business address is

displayed in the overview of recommended destina-

tions.

Tap

Basic functions Enter business address.

›

Infotainment Amundsen for Your Skoda Kamiq SUV First Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals