2018-2026 Skoda Kamiq SUV Keys, locks and alarm system -> Keyless locking (KESSY) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Keys, locks and alarm system -> Keyless locking (KESSY) for Your Skoda Kamiq SUV First Generation (2018-2026)

24 Keys, locks and alarm system › Keyless locking (KESSY)  
Locking the door without the lock cylinder  
Mechanically unlocking and locking the door  
Unlocking and locking the door with the lock cylin-  
der  
Remove the cover  
Pull the handle on the  
front left door and hold  
it in place.  
Insert the key into the  
recess on the under-  
side of the cover.  
Lift the cover in the di-  
rection of the arrow.  
Release the door han-  
dle.  
Open the door.  
For vehicles with a panel over the opening, remove  
the panel.  
Insert the key or a flat-head screwdriver into the  
slot.  
Locking and unlocking  
Insert the key into the  
lock cylinder and un-  
lock or lock it.  
Use the key or a flat-blade screwdriver to push it in  
towards the door.  
After closing, the door is locked.  
Install cover  
Pull on the door handle  
and hold it.  
Keyless locking (KESSY)  
Usage  
Replace the cover.  
Release the door han-  
dle.  
The keyless locking system, KESSY, enables unlock-  
ing and locking of the vehicle without actively using  
the remote control key.  
Locking the door without the lock cylinder  
Operation  
Keep the key with you when unlocking and locking.  
The sensors on the handle are intended to be operat-  
ed with bare hands, e.g. wearing gloves may affect  
the function of the sensors.  
Release  
Grab the door handle.  
Open the door.  
Open the door.  
For vehicles with a panel over the opening, remove  
the panel.  
Insert the key or a flat-head screwdriver into the  
slot.  
Turn the key or flat-head screwdriver towards the  
outside of the vehicle (spring-loaded position).  
After closing, the door is locked.  
Keys, locks and alarm system › Alarm system 25  
Lock  
Alarm system  
Functionality  
Touch the sensor.  
After locking, it is not  
possible to unlock  
within 2 seconds by  
touching the door han-  
dle. This can be used to  
check whether the ve-  
hicle is locked.  
The alarm system triggers audible and visual signals  
during a break-in or towing attempt.  
The alarm system is activated automatically approxi-  
mately 30 seconds after the vehicle is locked.  
The alarm system is automatically deactivated after  
the vehicle is unlocked.  
Alarm triggering  
The activated alarm system triggers an alarm when  
one of the following events occurs:  
Unlocking the boot lid  
Press the handle of the boot lid.  
Opening the bonnet  
Opening the boot lid  
Opening the door  
Manipulation of the ignition lock  
Towing the vehicle  
Movement in the vehicle  
Protection against inadvertently locking the key in  
the vehicle  
If the key is locked inside the vehicle, the vehicle will  
unlock itself automatically. If no door is opened with-  
in 45 seconds, the vehicle automatically locks again.  
If the key is locked in the boot, the boot lid will auto-  
matically unlock itself.  
Sudden and significant voltage drop of the electri-  
cal system  
Uncoupling the trailer  
Opening the door unlocked via the lock cylinder  
Settings  
Deactivate keyless locking  
Switching off the triggered alarm  
Unlock the vehicle.  
Lock the vehicle with the button on the key.  
Within 5 s, touch the sensor on the door handle  
with your finger.  
Or:  
Turn on the ignition.  
Deactivation is confirmed by a single flash of the  
direction indicators.  
To check the deactivation, wait at least 10 seconds  
and then pull the door handle.  
Operating conditions  
For the correct functioning of the alarm system, all  
windows must be closed.  
The door must remain locked.  
Keyless locking is automatically activated once again  
after the vehicle is unlocked.  
A trailer is integrated into the alarm system under  
the following conditions:  
The vehicle is factory-fitted with a towing device.  
The trailer is electrically connected to the vehicle  
Troubleshooting  
The vehicle cannot be unlocked or locked using  
the sensors on the handle  
via the trailer socket.  
The trailer is not equipped with LED taillights.  
Lock or unlock the vehicle with the button on the  
key.  
If the electrical connection to the trailer is interrup-  
ted on a vehicle with an activated alarm system,  
warning signals are triggered.  
Then try to unlock or lock the vehicle using the  
sensors on the handle.  
Disable the alarm before connecting or discon-  
necting a trailer.  
If keyless locking does not work, seek the help of a  
specialist garage.  
If the vehicle is not unlocked for a longer period  
of time, the function can be deactivated automati-  
cally.  
Settings  
The following functions of the alarm system can be  
deactivated at the same time:  
When the ignition was switched on, no key was  
found  
Interior monitoring  
Towing protection  
illuminates  
Message that no key was found in the vehicle  
Insert the key into the vehicle.  

Related Topics

Popular Owner Manuals