2018-2026 Skoda Kamiq SUV Restraint systems and airbags -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Restraint systems and airbags -> Seat belts for Your Skoda Kamiq SUV First Generation (2018-2026)

36 Restraint systems and airbags › Seat belts  
illuminated – a front or rear seat belt is not fas-  
tened  
Restraint systems and airbags  
Seat belts  
lights up - rear seat not occupied  
Functionality  
illuminated – a rear seat belt is not fastened  
illuminated – a rear seat belt is not fastened  
illuminated – a rear seat belt is fastened.  
illuminated – a rear seat belt is fastened.  
illuminated – a rear seat belt is fastened.  
Seat belts that are fastened correctly offer very  
good protection in the event of an accident. They re-  
duce the risk of an injury and increase the chance of  
survival in the event of a major accident.  
WARNING  
The seat belts must not be removed or altered in  
any other way.  
If the driver's seat belt is damaged, stop driving.  
If another seat belt is damaged, the seat must not  
be occupied.  
Do not repair damaged seat belts yourself.  
Have a damaged seat belt replaced immediately by  
a specialist garage.  
Operation  
Fastening the seat belt  
Unfastening the seat belt  
Settings  
Automatic belt retractor  
Grasp the buckle latch  
and slowly pull the belt  
over the chest and pel-  
vis towards the buckle.  
Insert the buckle latch  
into the buckle until  
there is an audible  
click.  
The automatic retractor locks the belt in the event  
of a jerky pull on the belt. The belts lock, for example,  
when full braking, when the car accelerates, when  
driving downhill and when cornering.  
WARNING  
If the seat belt does not lock when pulled jerkily,  
have the retractor checked by a specialist garage.  
Pull on the belt to en-  
sure that the buckle is  
securely fastened.  
Belt tensioners  
The safety of the driver, front passenger and passen-  
gers on the outer rear seats who are wearing their  
seat belts is enhanced by the belt tensioners fitted  
to the inertia reels on the front and rear external seat  
belts.  
Grasp the buckle latch  
and release it by press-  
ing the red button.  
Hold the belt so it does  
not twist when rolling  
up.  
If there is a collision with a certain severity, the seat  
belt is tightened by the belt tensioner so that unwan-  
ted body movement is prevented.  
The belt tensioner can also be deployed when the  
seat belt is not fastened.  
Belt tensioners are not activated in the event of a  
roll-over, minor collisions or in accidents in which no  
major forces are produced.  
Smoke is released when the belt tensioner is de-  
ployed. This does not indicate a vehicle fire.  
Move the seat belt  
height adjuster up-  
wards to increase the  
height.  
Reversible belt tensioner  
Vehicles with a proactive occupant protection sys-  
tem include reversible belt tensioners » page 141.  
The reversible belt tensioners increase safety for the  
belted driver and front passenger by automatically  
tightening the seat belt tightly over the body in criti-  
cal driving situations and then releasing it again.  
Status display in the instrument cluster display  
Depending on the type of display, the display can be  
as follows:  
Restraint systems and airbags › Child seat 37  
Press the safety button  
and move the seat belt  
height adjuster down  
to reduce the height.  
tween the front seat and the child seat or the child  
carried in the child seat.  
Before installing a forward-facing child seat, adjust  
the headrest so that it is as low as possible.  
If the headrest prevents the child seat from being  
fitted, adjust the headrest to the highest position.  
When installing the child seat, avoid contact be-  
tween the roof and the rear pillar. If the head air-  
bag is deployed, there is a risk of injury.  
After adjustment, firm-  
ly pull on the belt to  
ensure that the seat  
belt height adjuster has  
correctly locked in  
place and that the belt  
is locked securely.  
If using a separate child seat cushion, adjust the  
headrest so that the child's head is flush with, but  
not protruding above the height of the top edge of  
the headrest.  
Troubleshooting  
Blocked belt retractor  
Using a child seat on the front passenger seat  
Grasp the strap in the  
middle and pull quickly.  
Hold the strap and let  
it roll up slowly.  
Pull on the strap to see  
if the retractor is  
working properly.  
If the strap is still  
blocked, repeat the un-  
locking procedure  
once or twice.  
When using a child seat on the passenger seat, any  
country-specific regulations must be observed.  
Never use a child seat in which the child is carried  
with his or her back to the direction of travel on a  
seat protected by an active airbag placed in front of  
the seat. This could cause serious injury to the child,  
even death.  
This is also indicated by the following stickers:  
If the strap is still blocked, seek the help of a spe-  
cialist garage.  
Child seat  
What you should be mindful of  
For how to install and use the child seat, please note  
the instructions in this Owner's Manual as well as the  
instructions of the child seat manufacturer.  
Sticker on the passenger sun visor  
Sticker on the central body pillar on the passenger  
side  
For safety reasons, we always recommend that chil-  
dren are transported on the back seats. Carry chil-  
dren on the front passenger seat only in exceptional  
cases.  
The following instructions must be followed when  
using a child seat on the front passenger seat:  
Use child seats according to standard ECE-R 44 and  
ECE-R 129 of the European Economic Commission.  
It is essential to deactivate the front passenger air-  
bag if using a child seat in which the child is trans-  
ported with its back facing the direction of trav-  
el » page 42.  
If possible, adjust the front passenger seat back-  
rest so that it is vertical, to ensure that there is se-  
cure contact between the backrest and the child  
seat.  
If possible, move the front passenger seat back-  
wards so that there is no contact between the  
front passenger seat and the child seat behind it.  
Adjust the height-adjustable front passenger seat  
as much as possible.  
Child seats according to standard ECE-R 44 and  
ECE-R 129 are marked with the test symbol: large E  
in a circle, with the test number below.  
We recommend using child seats from the ŠKODA  
Original Accessories range. These child seats have  
been developed and tested for use in ŠKODA vehi-  
cles. They satisfy the standard ECE-R 44 or ECE-R  
129.  
WARNING  
When installing the child seat on the rear seat, ad-  
just the front seat so that there is no contact be-  
Set the front passenger seat belt as high up as pos-  
sible.  

Related Topics

Popular Owner Manuals