Get Driver assist systems Guide for Skoda Kodiaq SUV Second Generation (2024-2026)

178 Driver assist systems › Braking and stabilising systems

Settings

Driver assist systems

Activation/deactivation

Press the button.

Activation is indicated by the illumination of the

Braking and stabilising systems

Overview

›

symbol

in the button.

Stabilisation control (ESC)

NOTICE

ESC helps to stabilize the vehicle in borderline situa-

tions (e.g. when the vehicle starts to skid). ESC

brakes the individual wheels to maintain the direc-

tion of travel.

Disable Auto Hold to allow the vehicle to roll if nec-

essary when driving through a car wash.

ﬂashes - ESC is engaged

ESC Sport

ESC Sport allows for a sportier driving style.

lit up - ESC Sport is activated

Traction control (TCS)

ASR helps to stabilize the vehicle when accelerating

or driving on low-grip roads. ASR reduces the drive

power transmitted to the wheels when the wheels

spin.

ﬂashes - ASR is engaged

Antilock braking system (ABS)

ABS helps maintain control of the vehicle during

emergency braking. An ABS intervention is noticea-

ble by pulsating movements of the brake pedal.

Motor Slip Regulation (MSR)

MSR helps to maintain control of the vehicle in the

event of a sudden reduction in speed, e.g. on icy

roads. If the drive wheels lock, MSR increases the

engine speed. This reduces the braking eﬀect of the

engine and the wheels can rotate freely again.

Electronic Diﬀerential Lock (EDL)

EDL helps to stabilize the vehicle when driving on

road surfaces with diﬀerent grip under the individual

wheels. EDL brakes a spinning wheel and transmits

power to a diﬀerent drive wheel.

Electronic Diﬀerential Lock (XDL+)

XDL + helps to stabilize the vehicle during fast cor-

nering by braking the inside wheel of the driven axle.

Active steering assistance (DSR)

In diﬃcult situations, the DSR provides the driver

with a steering recommendation in order to stabilise

the vehicle.

Hill Hold Control

Hill Hold Control helps when starting oﬀ on uphill

gradients by braking the vehicle for about 2 seconds

after the brake pedal is released.

Operating conditions

✓ The gradient is at least 5%.

✓ The driver's door is closed.

Driver assist systems › Front Assist 179

Troubleshooting

Multi-Collision Brake (MCB)

MCB helps to decelerate and stabilize the vehicle af-

ter a collision with an obstacle. This reduces the risk

of further collisions.

ESC or ASR faulty/deactivated by the system

illuminates

Stop the engine and start again.

If the indicator light does not go out after covering

a short distance, seek the help of a specialist ga-

rage.

›

Operating conditions

✓ There has been a frontal, side and rear collision of

a certain severity.

›

✓ The impact speed was greater than 10 km/h.

✓ The brakes, ESC and other required systems re-

mained functional after the impact.

✓ The accelerator pedal is not pressed.

ABS faulty

illuminates

You may continue driving, exercising appro-

priate caution. Seek the help of a specialist garage.

›

Trailer Stability Assist (TSA)

TSA helps to stabilize the trailer. As the trailer begins

to lurch, TSA stabilizes the trailer by slowing down

the individual vehicle wheels.

Brake system and anti-lock braking system faulty

illuminates together with

Operating conditions

✓ The hitch was supplied from the factory or pur-

chased from ŠKODA Genuine Accessories.

Stop driving! Seek the help of a specialist ga-

›

rage.

✓ The trailer is connected to the trailer socket.

✓ ASR activated.

✓ The driving speed is higher than 60 km/h.

Front Assist

Functionality

Front Assist monitors the distance to the vehicle

ahead and points out when the safety distance is ex-

ceeded. In borderline situations, it helps to avoid a

collision by braking interventions.

Settings

Deactivating/activating ASR

Press the button.

›

Or:

Status display in the instrument cluster display

illuminates - safety distance too small

In Infotainment, select the following menu:

›

or

illuminates - warning in case of collision

Or:

Automatic braking if there is a risk of a collision

If there is a risk of a collision, the following symbol is

When deactivated, lights up in the instrument

cluster.

illuminated as a warning

or

from the isolation

box. If you do not respond to the warning, the vehi-

cle will slow down.

goes out on renewed activation.

Deactivating the ASR may be helpful in the following

situations:

At a driving speed of up to 30 km / h, the vehicle is

braked without prior warning.

Driving with snow chains

Driving in deep snow or on very loose ground

Starting up a vehicle that is stuck

▶

Automatic braking can be stopped by pressing the

accelerator pedal or by a steering intervention.

With automatic braking, the pressure in the brake

system increases. The brake pedal cannot be operat-

ed by using the pedal as normal.

Activate/deactivate ESC Sport

Keep the button pressed down.

›

Or:

WARNING

Risk of an accident!

Front Assist does not respond to crossing or oncom-

ing vehicles.

In Infotainment, select the following menu:

›

Or:

Operating conditions

When activated, lights up in the instrument clus-

ter.

✓ The parking aid is activated.

✓ The driving speed is higher than 5 km/h.

goes out when deactivated.

180 Driver assist systems › Pedestrian detection system

Function restriction

Pedestrian detection system

Functionality

The function may be restricted or unavailable in the

following cases:

Pedestrian recognition helps to prevent a collision

with crossing pedestrians by enabling automatic

braking interventions.

▶ About 30 seconds after starting (

the instrument cluster)

lights up in

When driving around a sharp bend

During an ESC intervention

▶

Status display in the instrument cluster display

▶

or

lights up - Danger of collision

Settings

Risk of collision in a speed range of 5-30 km/h

The system triggers automatic braking.

Automatic activation

Front Assist is automatically activated when the igni-

tion is switched on.

Risk of collision in a speed range of 30-60 km/h

The system warns of a collision hazard ﬁrst. If the

driver does not respond, the vehicle is automatically

braked.

Activation/deactivation in the instrument cluster

Press the button on the multifunction steering

wheel.

›

Select Front Assist

.

›

Operating conditions

Activation/deactivation in Infotainment

In the menu

✓ Front Assist is deactivated.

✓ The vehicle speed is 5-60 km/h.

.

Show system deactivation in the display of the in-

strument cluster

Speed limiter

Functionality

illuminates together with

or

The speed limiter controls the maximum driving

speed according to the set speed limit.

illuminates together with

If the limit is exceeded when driving downhill, brake

the vehicle with the brake pedal.

Deactivate Front Assist when handling the vehi-

cle on a truck, a car ferry etc.

Status display in the instrument cluster display

illuminates - the cruise control is activated.

ﬂashing - the set limit is exceeded

Troubleshooting

Front Assist is not available

When the regulation starts

set limit is displayed.

highlighted and the

illuminates together with

Or:

Operating conditions

illuminates together with

✓ The driving speed is higher than 30 km/h.

Clean the front radar sensor.

Stop the engine and start again.

If Front Assist is still unavailable, check the brake

lights on the vehicle or on the attached trailer.

›

Operation

›

Variant without cruise control

If the brake lights are working and Front Assist is

›

still unavailable, seek the help of a specialist ga-

rage.

There was an unfounded warning or system inter-

vention

Clean the front radar sensor.

If the system is not working properly, disable Front

Assist and seek the help of a specialist garage.

›

Driver assist systems › Cruise control system 181

Variant with ACC

A

Activate limiter (control inactive)

Deactivate limiter

Interrupt control (sprung position)

Resume control¹⁾/ Increase limit

B

C

Start control with current speed / Reduce

limit

Variant with cruise control

Activate ACC (condition for the subsequent

activation of the limiter). To enable the speed

limiter, press the button and in the multi-

function steering wheel and in the instrument

A

Activate cruise control (condition for the

subsequent activation of the limiter).

cluster choose the menu item Speed limit

.

Resume control ¹⁾/ Increase limit in steps of

1 km/h (sprung position)

To enable the speed limiter, press the button D

and in the instrument cluster choose the menu

Stop control (sprung position)

Deactivate the limiter

item Speed limit

.

Deactivate limiter

Interrupt control (sprung position)

Resume control¹⁾/ Increase limit

Increase limit in steps of 10 km/h

Decrease limit in steps of 10 km/h

Start control/Reduce limit in steps of 1 km/h

B

C

Start control with current speed / Reduce

limit

Limit exceeded

Fully depress the accelerator.

D

Show menu of assist systems - Possibility of

switching between cruise control and speed lim-

iter

Switching to cruise control interrupts the con-

trol.

›

Control will continue as soon as the vehicle has de-

celerated to below the set limit.

Troubleshooting

Adjusting the speed limit with the buttons B and

C

Speed limiter faulty

By pressing in steps of 1 km/h.

illuminates

By holding in steps of 10 km/h.

Seek the help of a specialist garage.

›

Cruise control system

Functionality

The cruise control system maintains the set speed

without the accelerator pedal having to be operated.

This, however, is only possible to the extent permit-

ted by the engine output and braking power of the

vehicle.

1)

If no speed limit is set, the current speed is set as the speed limit.

182 Driver assist systems › Adaptive Cruise Control (ACC)

WARNING

Troubleshooting

Risk of the cruise control system starting uninten-

tionally!

Deactivate cruise control after use.

Cruise control system faulty

illuminates

▶

Seek the help of a specialist garage.

›

Status display in the instrument cluster display

illuminated - the cruise control system is acti-

vated

Adaptive Cruise Control (ACC)

Functionality

illuminated - cruise control is active

When cruise control starts, the set speed is

displayed.

ACC control

ACC maintains the set speed. When your vehicle ap-

proaches the vehicle in front, ACC will automatically

start to maintain the set distance to this vehicle.

Operating conditions

✓ The driving speed is higher than 20 km/h.

Maintaining the set speed and the distance will here-

inafter be referred to as Control.

Operation

WARNING

ACC does not respond to crossing or oncoming ob-

jects.

Operating with the lever

ACC is intended primarily for use on motorways.

pACC (predictive cruise control)

pACC represents an extension of the ACC system.

pACC adjusts the speed according to recognized

speed limits and the route, e.g. curves, intersections

or roundabouts.

The system uses the following sources to evaluate

the situation:

Navigation data

Traﬃc Sign Recognition

Sensors, radars and cameras

▶

A

Activate cruise control (cruise control deacti-

vated)

Deactivate cruise control

WARNING

Interrupt control (sprung position)

Resume cruise control¹⁾/Increase speed

pACC does not respond to railway crossings.

B

Speed range

Depending on the equipment, ACC allows a speed

setting in the range of 30-160 or 30-210 km/h.

C

Start control with current speed/Reduce

limit

D

Show menu of assist systems - Possibility of

switching between cruise control and speed lim-

iter

If control is started at a speed of less than 30 km/h

on vehicles with an automatic transmission, the

speed is automatically increased to 30 km/h or con-

trolled according to the speed of the vehicle ahead.

Accelerate temporarily

Depress the accelerator pedal.

›

Distance level

The distance to the vehicle ahead can be adjusted to

ﬁve diﬀerent levels.

Releasing the accelerator pedal will cause the speed

to drop again to the set speed.

WARNING

Interrupting cruise control

Maintain a minimum distance in accordance with

the country-speciﬁc legal regulations.

▶

After pressing the brake pedal

▶

After an ESC intervention

▶

Automatic stop and start with automatic gearbox

A vehicle with an automatic transmission can be de-

celerated to a stop using the ACC and start moving

1)

If no speed is set, the current speed is adopted.

Driver assist systems › Adaptive Cruise Control (ACC) 183

again. Control is disconnected in case of longer hold-

ing periods.

Activate ACC (control inactive)

Start or resume control/Increase speed in

steps of 1 km/h (sprung position)

To resume the regulation:

Depress the accelerator pedal.

›

Stop control (sprung position)

Deactivate ACC

Or:

Set the lever in position

.

›

Increase speed in steps of 10 km/h

Reduce speed in steps of 10 km/h

Set distance level

Or:

Applies to vehicles with hand recognition on the

steering wheel: Grab the steering wheel again.

›

Start control/Reduce speed in steps of 1

km/h

The control is interrupted when the brake pedal is

depressed.

Starting control with the current speed

Overtaking

Tap on

.

›

Or:

If your vehicle changes to the fast lane and no vehi-

cle is detected in front, ACC accelerates up to the

set speed.

If no speed is saved, move the lever to the sprung

›

position

.

Status display in the instrument cluster display

illuminates - ACC is activated

Set distance level

Move the

switch to the sprung position

›

or

.

illuminates - Control is active

Line A appears in the

display, indicating the

change in distance.

When the control starts, the set speed is displayed.

illuminates - ACC does not decelerate suﬃ-

ciently

Use the

to set the desired dis-

tance level.

switch

›

Depress the brake pedal.

›

illuminates - ACC controls the driving speed ac-

cording to the permissible speed

illuminates - ACC controls the driving speed ac-

cording to the approaching roundabout

For temporary acceleration

Depress the accelerator pedal.

illuminates - ACC controls the driving speed ac-

cording to the approaching junction

›

The vehicle accelerates and control is temporarily in-

terrupted. Upon releasing the accelerator, control is

resumed.

illuminates - ACC controls the driving speed ac-

cording to the road

Interrupting cruise control

Operation

After pressing the brake pedal

▶

By operating the clutch pedal for a long time

After an ESC intervention

After deactivation of the ASR

▶

Operating with the lever

Resuming control

If a speed is stored, move the lever to the sprung

›

position

.

The vehicle is controlled at the set speed. The set

speed is shown in the instrument cluster display.

Function restriction

Do not use the ACC in the following cases:

The vehicle is making a sharp turn.

The vehicle is travelling on a sloping road or in ruts.

▶

184 Driver assist systems › Adaptive Cruise Control (ACC)

When the driving lane is too narrow.

The vehicle drives through a construction site.

Stationary vehicle

▶

WARNING

Be particularly attentive and alert in the following

situations.

▶

Regulation according to the vehicle in the adjacent

lane

If your vehicle is moving faster than the vehicle in

the next lane on the driver's side, at a speed of more

than 80 km/h, this may cause your vehicle to be con-

trolled according to that vehicle.

If a vehicle in front turns and there is a stationary ve-

hicle in front of this vehicle, the ACC must not re-

spond to the stationary vehicle.

When cornering

Vehicles with special load or special bodies

A load or superstructure that protrudes outside the

vehicle might not be detected by the ACC.

Settings

Activation / deactivation and setting

In the Infotainment system, in the menu

.

When cornering, a vehicle in the next lane may enter

the detected area. Your vehicle will be controlled ac-

cording to this vehicle.

◼

▶

Driving programme: - Setting the vehicle acceleration

Narrow or staggered vehicle

when the ACC is switched on (this setting is

made for vehicles with driving mode selec-

tion » page 172)

▶

Last distance selected - Switch on/oﬀ the last distance

selected

▶

Distance: - Setting the distance to vehicles in front

▶

Road layout preview - Switch the cruise control on/oﬀ

according to the road proﬁle (e.g. reduce speed

before a bend)

Speed limit preview - Switch the speed control on/oﬀ

▶

according to the permissible speed

ACC detects a narrow or staggered vehicle only

when it is in the area covered by the radar.

Troubleshooting

Lane change by another vehicle

ACC not available

illuminates together with

or

illuminates together with

Stop the engine and start again.

If ACC is still unavailable, check the brake lights on

the vehicle or on the attached trailer.

›

If the brake lights are working and ACC is still un-

available, seek the help of a specialist garage.

›

A vehicle that changes to the lane a short distance

away may not be recognized by the ACC in time.

Driver assist systems › Lane Assist 185

✓ The lane markings are clearly visible.

Lane Assist

Usage

Function restriction

Lane Assist helps to keep the vehicle within the lane.

It is based on the boundaries of a lane. These may in-

clude lane markings, road edges or objects such as

curbs or possibly traﬃc cones.

The system function may be restricted in the follow-

ing cases:

The ﬁeld of view of the sensor is limited by a dirty

▶

The system is intended primarily for use on high-

ways.

screen or an obstacle or a preceding vehicle.

If the weather conditions are unfavourable.

The vehicle is making a sharp turn.

The vehicle is travelling on a sloping road or in ruts.

When the driving lane is too narrow.

The vehicle drives through a construction site.

▶

Functionality

As the vehicle approaches a lane marking, the sys-

tem executes a steering movement in the opposite

direction from the lane marking. The steering inter-

vention can be overridden manually.

WARNING

Danger of incorrect steering intervention!

Certain objects or markings on the road may be erro-

neously recognized as lane markings.

Always keep your hands on the steering wheel and

be prepared to override the steering intervention.

No system intervention occurs when changing lane

with the turn signal on.

▶

Status display in the instrument cluster display

lights up - System is activated and ready to

intervene

Settings

lights up - System is activated and ready to

intervene

Activation/deactivation in the instrument cluster

Press the button on the multifunction steering

wheel.

›

lights up - System intervenes

Select Lane Assist

.

›

lights up - System intervenes

Activation/deactivation in Infotainment

In the menu

.

Display

Display example in black and white display.

Lane boundary highligh-

ted on the right: system

intervenes on the right

when approaching the

lane marking.

Troubleshooting

Message regarding system unavailability

Clean the windscreen in the sensor area.

Stop the engine and restart again after a short

time.

›

In the coloured display,

the lines are highlighted

in colour.

If the system is still not available, seek the help of a

specialist garage.

›

Travel Assist

Usage

Warning through steering wheel vibrations

The steering wheel vibrations are triggered in the

following situations:

Travel Assist helps to keep the vehicle within the

lane while controlling the speed of the vehicle.

The vehicle crosses the boundary line without the

indicator light switched on.

▶

The system is not able to keep the vehicle within

the lane.

▶

Functionality

Correct the steering movement in the event of vi-

brations.

›

Travel Assist uses the functions Lane Assist and

ACC.

Operating conditions

✓ The driving speed is higher than 60 km/h.

186 Driver assist systems › Lane change assist system Side Assist

WARNING

Risk of an accident!

Always keep your hands on the steering wheel and

be ready to take over the steering.

The notes in the functional description of Lane As-

sist and ACC are to be taken into account.

Settings

Activation

▶

Press the

wheel.

button on the multifunction steering

›

▶

Regulation with the current speed and adaptive lane

assist are started.

Adaptive lane assist

Deactivation

This function keeps the driver within the selected

position within the lane.

Depress the brake pedal.

›

Or:

Status display in the instrument cluster display

is lit up – the system is activated, cruise con-

trol and adaptive lane guidance are active

Set the ACC lever in position

» page 183.

›

Additional settings are identical to ACC and Lane

Assist.

is lit up – the system is activated, cruise con-

trol is active

is lit up – the system is activated, adaptive

lane guidance is active

Troubleshooting

lights up - you have let go of the steering

wheel, take over steering

Message regarding system unavailability

Follow the troubleshooting instructions in case of

Lane Assist » page 185 and ACC » page 184.

›

lights up - you have released the steering

wheel, take over steering immediately

If the system is still not available, seek the help of a

specialist garage.

›

Operating conditions

Lane change assist system Side Assist

Usage

✓ The ACC is activated.

✓ The vehicle speed is max. 210 km/h.

✓ The lane markings are clearly visible.

The system uses optical signals in the exterior mirror

to alert the driver to vehicles that could be danger-

ous when changing lanes.

✓ In vehicles with manual gearbox, the vehicle

speed is higher than 30 km/h.

Function restriction

Functionality

Travel Assist is only for support and does not absolve

you from your responsibility for driving the vehicle.

The system monitors the area both beside and be-

hind the vehicle.

The function may be restricted or unavailable in the

following cases:

The system warns of an approaching vehicle through

the indicator light in the exterior mirror cover on

the vehicle side, where the vehicle is recognized.

The ﬁeld of view of the sensor is limited by a dirty

▶

screen or an obstacle or a preceding vehicle.

If the weather conditions are unfavourable.

The vehicle is making a sharp turn.

Driving situations in which a system warning oc-

curs

▶

The vehicle is travelling on a sloping road or in ruts.

When the driving lane is too narrow.

In addition to these restrictions, also note the ACC

restrictions » page 183.

WARNING

Danger of incorrect steering intervention!

Certain objects or markings on the road may be erro-

neously recognized as lane markings.

Always keep your hands on the steering wheel and

be prepared to override the steering intervention.

▶

Your vehicle is being overtaken by vehicle A . The

faster vehicle A approaches, the sooner the warning

is given by the indicator light.

Driver assist systems › Traﬃc sign recognition 187

If the system is still not available, seek the help of a

specialist garage.

Vehicle B is overtaken by your vehicle at a speed

that is faster by max. 10 km/h. If the speed is higher

during the overtaking process, no warning will be

provided by the indicator light.

›

Traﬃc sign recognition

Indicator light

illuminates - There is another vehicle behind your

vehicle

Usage

The road sign recognition shows road signs in the

display of the instrument cluster. This also indicates

exceeding the speed limit.

ﬂashing - There is another vehicle behind your ve-

hicle, and the turn signal on the same side is switch-

ed on

WARNING

For vehicles with Lane Assist, the indicator light will

also ﬂash if your vehicle crosses the lane markings in

the direction of the approaching vehicle. The system

will trigger a steering wheel vibration in this case.

Road signs on the road always have priority over the

road signs shown on the display.

Functionality

For this, Lane Assist must be activated and the lane

marking between the vehicles must be detected.

Displayed road signs

Speed limits

Overtaking prohibited

Driving bans – one-way traﬃc

Additional characters, e.g. speed limit in wet condi-

tions

▶

Operating conditions

✓ The driving speed is higher than 15 km/h.

✓ No accessories are connected to the trailer sock-

et.

Towing a trailer

If a trailer or other accessory is connected to the

trailer socket, trailer-relevant road signs are also dis-

played.

Function restriction

The system cannot detect lane width. For this rea-

son, it may, for example, draw attention to a vehicle

in a distant lane in the following cases:

Driving on roads without speed limits

If you are on a road with no speed limits, the road

signs will appear in the display.

The vehicle is driving on a road with narrow lanes

or on the lane edge.

▶

Example of road sign display

The vehicle is taking a turn.

▶

The system can draw attention to objects along the

road, such as high guard rails or noise barriers.

In the following cases, the system does not have to

issue a warning of a vehicle, or the warning may be

issued incorrectly:

Example of additional characters

Example of several simultaneously rec-

ognised road signs.

If the weather conditions are unfavourable.

A very fast approaching vehicle.

▶

The vehicle is driving through a sharp bend or a

roundabout.

At the same time, a red display regarding the

speed limit appears in the speedometer.

Settings

Speed units

The speed indications in the road signs shown refer

to the speed units that are common in the country.

In the instrument cluster display

In the menu Assist systems

.

For example, the display may refer to 30 km/h or

30 mph depending on the country.

In Infotainment

In the menu

.

Restriction

Troubleshooting

The system function may be restricted in the follow-

ing cases:

Message regarding system unavailability

Stop the engine and start again.

›

188 Driver assist systems › Crew Protect Assist proactive occupant protection

The sensor is blinded by the sun or oncoming traf-

ﬁc.

The ﬁeld of view of the sensor is limited by an ob-

stacle or a preceding vehicle.

Risk of frontal impact

Applies to vehicles with the Front Assist system.

▶

The system triggers safety measures when it de-

tects the impending danger of a frontal impact.

If the weather conditions are unfavourable.

The vehicle is moving at high speed.

The road signs are hidden, damaged, or are non-

standard.

The road signs are attached to ﬂashing neon signs.

The navigation map documents are not up-to-date

or not available.

▶

Driver inactivity hazard

Applies to vehicles with assist systems for emergen-

cy situations.

The system triggers safety measures when it de-

tects the impending danger if the driver is inactive.

▶

Function restriction

Settings

The function may be restricted or unavailable in the

following cases:

Activation / deactivation and setting

In the Infotainment system, in the menu

.

When deactivated in the infotainment in the menu

▶

When deactivating the ASR or activating the ESC

Sport

▶

◼

Traﬃc Sign Recognition

▶

Show in instrument cluster - Activation/deactivation of

When reversing

If there is a malfunction in the ESC, reversible seat

belt or airbag system

▶

the additional road signs in the display of the in-

strument cluster

Speed warning: - Conﬁgures a warning when the

▶

If there is a malfunction or limitation of the Front

Assist system

If there is a malfunction or restriction of the Emer-

gency Assist assist systems

▶

speed limit is exceeded

Warning at over - Increases the speed limit for the

▶

warning when exceeding the permitted speed

Trailer detection

◼

▶

Show road signs relevant to trailers Activation/deactivation

Settings

of the display of road signs relevant to trailers

▶

Use for route calculation - Activation/deactivation taking

trailers in account for route calculation in naviga-

tion

Automatic activation

The system is automatically activated when the igni-

tion is switched on.

▶

Tap on maximum speed for trailers - Setting the speed limits

for trailer operation

Troubleshooting

Crew Protect Assist faulty

illuminates together with

Message concerning unavailability or function-

al restriction

Crew Protect Assist proactive occupant

protection

Usage

Seek the help of a specialist garage.

›

The system of proactive occupant protection trig-

gers measures to protect vehicle occupants in dan-

gerous situations.

Driver Alert fatigue detection assistant

Functionality

Driver Alert evaluates the steering behaviour. If it de-

tects fatigue in the driver, a break is recommended.

In the display of the instrument cluster, the following

symbol lights up from the isolation box.

If the system evaluates the situation as critical, it

triggers the following safety measures:

Open windows are closed except for a small gap.

The sliding/tilting roof is closed.

The front seat belts are tightened on the body.

▶

WARNING

There will be no system warning during the so-called

micro-sleep.

The system response depends on the selected

driving mode.

Driver assist systems › Emergency situation assist systemEmergency Assist 189

Resetting the break recommendation

✓ ACC is enabled.

The break recommendation is reset in the following

cases:

Hill descent assistant

Functionality

The vehicle stops and the ignition is switched oﬀ

▶

The vehicle stops, the seat belt is removed and the

driver's door is opened

The Hill Hold Control helps to maintain a constant

speed when driving downhill through automatic

brake interventions.

The vehicle stops for more than 15 minutes

▶

In some situations, the system may erroneously

issue a break recommendation.

The system also works when driving in neutral or

when reverse gear is engaged.

Operating conditions

WARNING

Risk of an accident!

The system cannot properly fulﬁl its function on slu-

shy soil for physical reasons, e.g. ice or mud.

✓ Driving speed between 60-200 km/h.

Settings

Status display in the instrument cluster display

lit up in grey – the system is activated

Activation/deactivation

In the Infotainment system, in the menu

.

lit up white / green - the system intervenes

Change speed

The driving speed can be changed by pressing the

brake or accelerator pedal. After releasing the pedal,

the assist system maintains the current speed.

Emergency situation assist

systemEmergency Assist

Usage

Operating conditions

The assist systems for emergencies detect inactivity

of the driver, which, for example, can be caused by a

sudden loss of consciousness. The system then per-

forms measures as safely as possible to decelerate

the vehicle to a stop.

✓ The engine is running.

✓ Oﬀroad is activated.

✓ The slope is at least 10 %.

✓ Neither the accelerator nor the brake pedal is

pressed.

The assist systems are only available for vehicles

with an automatic gearbox.

✓ The vehicle speed is max. 30 km/h.

Settings

Functionality

Automatic activation

The system will be automatically activated when you

turn on Oﬀroad mode.

When the assist system detects inactivity on the

part of the driver

An acoustic warning signal sounds and a message

appears in the instrument cluster display.

▶

Activation/deactivation in Infotainment

The system is activated or deactivated in the follow-

ing menu.

If, after repeated warnings, the driver does not

take over the steering, the hazard warning lights

are switched on and the vehicle automatically

brakes.

▶

Or:

After the vehicle has come to a standstill, the park-

ing brake is switched on.

▶

Interruption of automatic braking

By pressing the brake or accelerator pedal

▶

By actively steering

▶

Operating conditions

✓ Lane Assist is activated and the boundary lines of

the traﬃc lane are recognised.

Driver assist systems for Your Skoda Kodiaq SUV Second Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals