Get Infotainment Bolero Guide for Skoda Kodiaq SUV Second Generation (2024-2026)

82 Infotainment Swing › SmartLink

Apple CarPlay

✓ Some applications require the data connection in

the mobile device to be turned on.

✓ Connect the mobile device for the ﬁrst time

when the vehicle is stationary.

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlay connection.

A list of devices, supported regions and applica-

tions that support the Apple CarPlay connection

can be found on the Apple Inc website.

✓ Siri voice control is on.

✓ The data connection in the mobile device is

A

B

List of available applications

Depending on the duration of operation:

switched on.

Tap: Return to the menu Apple CarPlay

Hold: Turn on voice control (Siri)

▶

Conditions for MirrorLink

✓ The device to be connected must have MirrorLink

connection.

▶

MirrorLink

A list of devices and applications that support the

MirrorLink connection can be found on the web-

sites of Car Connectivity Consorcium®.

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

Operation

It is not possible to operate the application while

driving

Operation of the running MirrorLink application

Move the functional areas to the left edge of

the screen

Return to the menu SmartLink

List of running applications

Move the functional areas to the right edge of

the screen

Move the functional areas to the top of the

screen

Display of the last running application in connec-

ted mobile devices

Settings

Move the functional areas to the bottom of

the screen

Connection conditions

Return to the menu MirrorLink

General connection conditions

✓ The mobile device supports the type of Smar-

tLink connection Android Auto, Apple CarPlay or

MirrorLink.

✓ Mobile devices, as well as the type of SmartLink

connection, are supported in the respective mar-

ket.

Restriction

Restriction of SmartLink applications while driving

For reasons of safety, the operation of some Smar-

tLink applications while driving is not possible or only

limited.

✓ Some connected mobile devices require the mo-

Functionality restriction of Infotainment with an

Android Auto connection

bile device to be “unlocked”.

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Conditions for Android Auto

✓ The device to be connected must have Android

Auto connection.

▶

A list of devices, supported regions and applica-

tions that support the Android Auto connection

can be found on the Google, Inc. website.

✓ The Android Auto application needs to be instal-

led on the mobile device.

Infotainment Swing › SmartLink 83

Choose to connect through MirrorLink.

For the duration of the connection, no other Blue-

tooth® devices can be connected to the Infotain-

ment system.

▶

›

MirrorLink - Disconnect

In the MirrorLink menu, tap on

.

›

Functionality restriction of Infotainment with an

Apple CarPlay connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

Tap on

.

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

▶

Connecting the device disconnects all currently

connected Bluetooth® devices.

For the duration of the connection, no Bluetooth®

devices can be connected to the Infotainment sys-

tem.

Tap on

.

▶

›

Select the desired device or connection type.

Functionality restriction of Infotainment with an

MirrorLink connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

▶

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Depending on the device to be connected, a con-

nection conﬁrmation may be required.

Settings

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Apple CarPlay.

›

Apple CarPlay - Disconnect

In the Apple CarPlay menu, tap on the function

area “ŠKODA”.

›

Tap on

.

›

Android Auto - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Android Auto.

›

Android Auto - Disconnect

In the Android Auto

DA”.

menu, tap “Return to SKO-

›

Tap on

.

›

MirrorLink - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

84 Infotainment Bolero › Infotainment overview

Turn: Set volume

▶

Infotainment Bolero

Control dial right

Press: Conﬁrm menu item

Infotainment overview

▶

Turn: select menu item/set value

▶

Bolero Infotainment system with navigation func-

tion

Radio menu

Media menu

Phone menu

Voice control

Infotainment settings

SmartLink menu

Information about vehicle settings

Overview of Infotainment menus

System

A

Touchscreen

Limitation

Control dial left

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

Press: Switch Infotainment on/oﬀ

Turn: Set volume

▶

The Infotainment system indicates this by means of

a message in the screen.

Control dial right

Press: Conﬁrm menu item

▶

Turn: select menu item/set value

▶

Basic settings

Radio menu

Setting basic functions

The following Infotainment functions are set in the

Media menu

Phone menu

menu:

Voice control

Time and date

Language

Units

▶

Navigation menu

SmartLink menu

Restore factory settings

Information about vehicle settings

Overview of Infotainment menus

Sound settings

The Infotainment sound is set in the menu

.

Bolero Infotainment without the navigation func-

tion

The following menu items can be set:

Setting the equalizer

Adjusting the volume ratio

Volume adjustment of individual Infotainment

functions

▶

The volume can be adjusted on e.g. one of the fol-

lowing menu items:

▶

Volume adjustment of voice commands

▶

Setting the maximum volume when Infotainment

is turned on

Speed-dependent volume setting

▶

Setting the Infotainment to mute with the park-

ing aid switched on

A

Touchscreen

Depending on the equipment, the following ad-

vanced sound settings can be set

Control dial left

Press: Switch Infotainment on/oﬀ

▶

Setting space optimisation

▶

Infotainment Bolero › Screen 85

Setting the audio proﬁles according to genre

Adjusting the subwoofer volume

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

▶

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

Determine system version

Tap

System information.

›

The conﬁguration assistant is automatically displayed

if the ignition is switched on and if there are at least

two menu items that have not been set up after

switching on the Infotainment.

Install the navigation function

In some countries it is possible to use the Infotain-

ment to extend the function of Navigation.

The function is available through the online service

Shop or from a specialist company.

To switch oﬀ the automatic display, when the

›

conﬁguration assistant is displayed tap Don't show

again

.

Screen

For manual display tap

Conﬁguration wizard

.

›

Set up menu HOME

Overview

To display another page of the HOME menu, press

the screen with two ﬁngers and drag it to the left

or right.

›

To add the preferred menu, proceed as follows:

Tap on an empty functional surface.

›

Or:

Press and hold an occupied functional surface and

then tap on an empty functional area.

›

Select a menu with the desired dimension of the

functional surface.

›

A

B

Status bar

Tap on to exit edit mode.

›

Bar with the functional surfaces of the displayed

menu

To remove the preferred menu, proceed as follows:

Press an occupied functional surface.

›

C

D

Display of the control centre

Other pages of the menu

Tap on

.

Tap on to exit edit mode.

Set up menu MENU

The position of the functional surfaces in the MENU

menu can be customized as follows:

Operation

NOTICE

Danger of screen damage!

Press and hold the desired functional surface until

it is free.

›

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

▶

Move the functional surface to a diﬀerent position.

›

In principle, operation by touch is identical to the op-

eration of a mobile phone.

Troubleshooting

The following operating modes are speciﬁc to the In-

fotainment system.

Infotainment not responding

If the infotainment does not respond, restart it as

follows:

Dragging up or down with two ﬁngers

Hold for longer than 10 s.

Wait for the restart to complete.

›

Quickly review the list

of phone contacts

▶

Switch 2D/3D map dis-

play

▶

System update

We recommend having the system update carried

out by a specialist company.

86 Infotainment Bolero › Infotainment keyboard

Dragging left or right with two ﬁngers

Display the time

Conﬁrmation sounds and animations

▶

Display next page of

the HOME menu

▶

Infotainment keyboard

Keypad overview

The arrangement of the keyboard characters de-

pends on the set infotainment language.

Pulling apart with two ﬁngers

Depending on the context, the following types are

used in infotainment:

Enlarge image

Zoom into the map

▶

Alphanumeric

▶

Numeric

Keyboard for input

Keyboard for search

Pulling together with two ﬁngers

Minimize image

Zoom out of the map

▶

Turn two ﬁngers

Keypad example

Rotate image

Rotate the map

▶

A

Input line

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters one after the oth-

er

▶

Display functional surfaces for moving the

cursor in the input line

Contactless gesture control

The Infotainment menus marked with the symbol

can be controlled by hand gestures.

▶

Move cursor to the left

▶

Gesture control is ach-

ieved by slowly moving

the hand back and

forth approximately 8

cm above the lower

edge of the screen.

Move cursor to the right

›

B

Entries found

▶

Show list

C

Keypad functional surfaces

▶

Change to lowercase

Depending on the set-

ting, a recognized ges-

▶

Switch to ﬁrst having an upper-case letter,

followed by lower-case letters

ture can be conﬁrmed acoustically and animated.

▶

Switch to uppercase

Displaying operation help

/

Switch to the language keypad

Switch to the numeric and character key-

pad

Tap on

.

›

▶

/

Switch to other character variants

Settings

The following basic screen functions are set in the

Show additional keyboard languages

Insert spaces

menu

Screen:

The next line

Brightness level of the screen

Switch oﬀ the screen

▶

Hold: Show more character variants

Infotainment Bolero › Voice control 87

▶

Setting up additional keyboard languages

Show password

Conﬁrm the entered characters

Tap

Additional keypad languages.

›

Numeric keypad

Voice control

Functionality

Voice control principle

Voice control works according to the principle of

dialogue between the user and the Infotainment sys-

tem.

The user says a voice command. The Infotainment

system responds or executes the voice command.

Keypad example

Advanced voice control

The vehicle's advanced voice control enables the ve-

hicle functions to be searched and operated online.

A

Input line

▶

Delete characters before the cursor

Advanced voice control understands ﬂuent whole

sentences. You do not need to use set commands or

phrases.

▶

Tap: delete the last character

Hold: delete all characters

B

Keypad functional surfaces

The advanced voice control can, for example, search

for special destinations or dictate SMS messages if

the connected telephone makes this possible.

▶

Conﬁrm the entered characters

If it is possible depending on the context, alpha-

numeric characters can be entered by holding a

function area with the number.

This function allows you to combine the search in

the online and oﬄine data of the Infotainment. The

transition between online and oﬄine search is seam-

less and imperceptible to the user.

Operation

Operating conditions

The Infotainment keypad is used to enter characters,

letters and numbers.

✓ Ignition on

✓ Infotainment switched on

The keypad will be automatically displayed when In-

fotainment prompts for characters.

Operating conditions for advanced voice control

To use the advanced voice control, the following

conditions must also be met:

Find

When entering characters, corresponding entries are

searched for.

✓ The vehicle supports the function.

✓ The vehicle has Infotainment and functions that

can be controlled by the advanced voice control.

✓ The ŠKODA Connect services are active.

✓ The vehicle is within range of a contractual mo-

bile network, through which the connection to

ŠKODA Connect Services is ensured.

The entry to be searched for can be entered includ-

ing diacritics.

The keyboard will only provide characters that

match the stored entries.

To display searched entries tap

.

›

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

✓ The level of protection of personal data is set to

Share my position

.

Requirement for recognition of the activation

command

Tap or repeatedly tap the ﬂag symbol until the

desired language keypad is displayed.

›

✓

Activated menu item

Voice control Active

Further character variants

Press and hold the sign with the symbol

Select the desired symbol.

.

›

Operation

Switch on voice control

Press the

wheel.

button on the multifunction steering

›

88 Infotainment Bolero › Control centre

Or:

You cannot use voice control while a phone call is in

progress.

Say the activation command “OK Laura”.

›

After switching on, the icon is displayed in the sta-

tus bar.

Settings

Enter voice command

The following voice control functions are set in the

Speak a voice command with voice control switch-

ed on.

›

menu

Voice control:

Conﬁrmation tones

Enable/disable use of the activation word.

▶

During recognition of the voice command, the icon

is displayed.

The Infotainment system then executes the voice

command or plays the message. During the message,

the icon is displayed.

Self help

Starting acoustic help

After the execution of the voice command, voice

control is switched oﬀ.

If the Infotainment system is expecting a voice

command, say “Help”.

›

Correcting a voice command

The “Help” voice command can be issued repeatedly

for further tips on voice control.

During voice command input, press the

on the multifunction steering wheel and say a new

voice command.

button

›

Displaying the help

Tap on

.

›

Stopping voice control

Stopping leaves more time for voice command input,

e.g. for searching for a phone contact.

Or:

If Infotainment is expecting a voice command, say

›

“Overview”.

Move your ﬁnger up or down over the Infotain-

ment screen.

›

Switch example voice commands display on / oﬀ

The system oﬀers the option of displaying example

voice commands after switching on the voice con-

trol in the Infotainment screen.

Or:

Say the voice command “pause”.

›

Resuming stopped voice control

To turn

tainment system

voice control on/oﬀ, tap Show in Info-

›

Press the

wheel.

button on the multifunction steering

›

.

Or:

Tap on in the Infotainment screen.

Control centre

Overview

›

Stopping the played back message

Press the

wheel.

button on the multifunction steering

›

Display of the control centre

Press the bar at the

top of the screen and

drag down.

›

Ending voice control

Press the

wheel twice.

button on the multifunction steering

›

Or:

Say the voice command “cancel” during voice com-

mand input.

›

Closing the control centre

Tap on

.

›

Restriction

Or:

Wait 5 seconds.

›

For some Infotainment languages, there is no voice

control available. The Infotainment system will indi-

cate this.

Control Centre

The Infotainment control centre can be used for

quick access to the following functions:

The messages are generated by Infotainment. Flaw-

less clarity (e.g. road or city name) cannot always be

guaranteed.

Infotainment Bolero › Radio 89

C Information about the broadcast content

D Station logos

List of available stations

Show favourites

Information about the station

Search stations manually (valid for AM and FM)

Settings

List of available analogue and digital radio stations

A

Display and administration of functional surfaces

of preferred features

Tap on

.

›

Played station

Station stored on the presets

A traﬃc radio station is set

The DAB transmitter emits images which are

displayed in the information to the station

Manual update of the station list

B

C

D

E

Display list of informational messages

Preferred functions

Display user account management

Setting the personal data protection level

Setting the instrument and key illumination

F

In the station list, information about the programme

type and the channel identiﬁcation of the regional

channel can be displayed.

Set functional areas of preferred features

Web radio player

› ^Atap and select a web radio station.

To display editing mode hold any function surface

of the preferred feature.

To add the preferred feature, move the desired

feature from the top of the screen to the function-

al surface at the bottom of the screen.

›

Tap and search or select web radio.

›

Tap on

.

To close edit mode, tap on

.

›

Radio

Overview

Display menu

Tap

.

›

Or:

Tap

A Select source

.

›

B Station name

Analogue and digital radio player

› ^ATap and select the desired frequency range.

C Information about the broadcast content

D Station logos

Tap and search for or select the desired station.

›

List of web radio and podcasts

Show favourites

Tap on

.

Information about the programme as well as the

broadcast content of the web radio

Settings

Podcast player

› ^TapA and select an online radio station.

Tap and search for or select the desired pocast.

›

Tap

.

A Select source

B Station name

90 Infotainment Bolero › Radio

See list of related podcasts based on content lis-

tened to

The podcasts are shown in the displayed lists

with the icon

List of favourite stations and podcasts

In the menu Radio, tap on

.

›

A Select source

B Podcast name

C Information about the broadcast content

D

Podcast logo with the symbol

Tap: Start playback

Tap: Pause

A

Select source

Radio text

Tap: Go back 15 secs

B

Tap: Go forward 15 secs

View episodes of the podcast being played

List of web radio stations and podcasts

Show favourites

C

Station buttons for favourite stations and pod-

casts

Operation

Show information about the podcast

Settings

Select station

List of web radio stations and podcasts

Tap on

.

›

Tap or at the top of the screen.

›

SCAN function

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

Search for web radio stations and podcasts

Recently played web radio stations and podcasts

100 most popular web radio stations depending

on the Infotainment language that has been set

To start automatic play

To stop automatic play, tap

, tap Scan.

.

›

Go to podcasts and select

Find stations manually

Manual search is available for AM and FM stations.

Search for and select web radio stations and pod-

casts based on the selected country

To display the

functional surface for the FM sta-

›

Search for and select web radio stations and pod-

casts based on the selected language

tion, turn on menu item

play: FM switch on

Advanced settings Station dis-

Search for and select web radio stations and pod-

casts based on the selected genre

In the Radio main menu, tap

To search in sequence, tap or next to the dis-

played frequency range scale.

.

›

See list of related podcasts based on content lis-

tened to

Or:

Infotainment Bolero › Radio 91

Hold down the scroll mark on the frequency range

scale and move it to the desired value.

The variant for changing stations using the function

›

surface

in the Radio menu is set as follows:

In the menu Radio

Arrow buttons:

.

›

Select the variant for switching between the sta-

tions stored on the station buttons or the stations

stored in the list of available stations.

Limitation

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Car parks, tunnels, tall buildings or mountains can

restrict radio reception.

In the rear side windows, there are antennas for re-

ceiving the radio signal.

▶

Functional areas

podcasts

Applies to web radio stations and podcasts.

for web radio stations and

The variant for changing stations using the function

surface

in the Radio menu is set as follows:

Covering the panes with foils or metal-coated la-

bels may aﬀect the reception of the radio signal.

The ŠKODA AUTO company assumes no responsi-

bility for the availability, correct functioning and

broadcast information of the RDS service.

In the menu Radio

Arrow buttons:

.

›

Select the variant for switching between the sta-

tions stored on the station keys or the last web

stations and podcasts listened to.

▶

Switch traﬃc reception (TP) for stations on/oﬀ

Applies to FM and DAB frequency range.

Settings

In the menu Radio

Traﬃc program (TP)

.

›

Save the station currently being listened to as a fa-

vourite from the Radio main menu

Assign station logo from the Infotainment memory

Applies to the FM and DAB frequency ranges.

Hold the desired station key for preferred stations

until the station is stored.

›

Infotainment oﬀers the option of assigning logos,

which are stored in the Infotainment memory, to the

stations.

Save station to favourites from the list of available

stations

Applies to AM, FM and DAB frequency ranges.

In the menu Radio

Select the desired station and logo.

Station logos

.

›

Hold the line with the name of the desired station.

Tap the desired preset button.

›

Switching oﬀ the station logo display

Applies to the FM and DAB frequency ranges.

Save channels from the list of web radio stations

and podcasts

Valid for web radio stations and podcasts

In the menu Radio

To select the desired station. No station logo

Station logos

.

›

.

Select a web radio station as the playback source.

›

Activating / deactivating automatic station logo

assignment

Applies to the FM and DAB frequency ranges.

Tap on

.

›

Go to the desired web radio station or podcast and

select it.

Hold the line with the name of the desired station

or podcast.

When the function is switched on, a station logo

from the Infotainment memory is assigned when the

station is stored on a preset.

›

Tap the desired preset button.

In the menu Radio

Advanced settings Tap Automatic selec-

›

tion of station logos

.

With podcasts, it is not possible to save the indi-

vidual episodes.

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

Deleting favourites

In the menu Radio

Delete memory entries

.

›

When the function is switched on and the station

buttons are displayed, you can see more information

about the content broadcast from the station to

which you are listening.

To delete a station button for preferred stations,

tap the desired station button and conﬁrm the de-

letion.

In the menu Radio

Radio text

.

›

To delete all station buttons for preferred stations

Clear all and conﬁrm the deletion.

›

Regional FM station logo

Applies to the FM frequency range.

Functional surfaces

dios

Applies to AM, FM and DAB frequency ranges.

for analogue and digital ra-

Infotainment provides the option of using country-

speciﬁc FM station logos.

92 Infotainment Bolero › Media

The quality you set aﬀects the amount of data used

in the data connection.

In the menu Radio

Advanced settings Region for station

›

logo:

.

Choose country.

Quality also depends on the speed and availability of

the data connection.

Switching additional announcements of the DAB

transmitter on / oﬀ

Applies to the DAB frequency range.

If playback failure occur, reduce the sound quali-

ty.

When the function is switched on, other announce-

ments are received as traﬃc announcements. These

include e.g. weather news, sports reports, ﬁnancial

news etc.

Media

What you should be mindful of

In the menu Radio

Advanced settings Tap Additional DAB

›

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

announcements

.

Switch RDS on/oﬀ

Applies to the FM frequency range.

The menu item is only available for some countries.

In the menu Radio

Advanced settings Radio Radio Data

›

System (RDS)

.

If the RDS function is disabled, the following menu

items in FM station settings are not available:

Traﬃc program (TP)

Radio text

RDS Regional

Automatic frequency change (AF)

Regional station logo.

▶

Overview

Switch automatic switching to a similar DAB trans-

mitter on / oﬀ

Applies to the DAB frequency range.

Display menu

Tap

.

›

When the function is switched on and there is signal

loss from the DAB station being listened to, Infotain-

ment automatically sets another DAB station with

similar content.

Or:

Tap

.

›

Music player

In the menu Radio

lar station if weak reception

Advanced settings Tap Switch to a simi-

›

.

Displaying FM / DAB stations or FM stations in the

list of available stations

Applies to the FM and DAB frequency ranges.

Depending on the following setting, the stations of

the selected frequency range are displayed in the list

of available stations.

In the menu Radio

Select one of the following menu items:

Advanced settings Station display:

.

›

▶

A Choose source

FM/DAB - the list shows available FM and DAB sta-

Manage ﬁles / multimedia database

Show favourites

tions.

FM - the list shows available FM stations.

▶

Details about the track being played

Settings

Sound quality of web radio stations and podcasts

Applies to web radio stations and podcasts.

To adjust the sound quality, in the Radio menu tap

›

on

Audio quality:

.

Choose low or high quality.

›

Infotainment Bolero › Media 93

Video player

Turn on / oﬀ repeat playback of the current al-

bum / folder

Turn on / oﬀ random playback of the current al-

bum / folder

Save the played track in the “My playlist” playlist

“My playlist” management

▶ To display the playlist, tap

.

▶ To manage the playlist tap in the displayed play-

list.

The following activities can be carried out in playlist

management:

A Select source

Control playback.

▶

Manage ﬁles / multimedia database

Show favourites

Change the order of a title in the list by holding and

moving to the desired position.

Delete title.

▶

Show video

Shrink image display

Enlarge the image display

Settings

Restriction

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

Player controls

Operation - Basics

Settings

Manage favourites

A Album image / symbol of the connected source

Tap: list available albums

▶

To save, hold the desired functional area for fa-

vourites A .

›

Tap: Start playback

Tap: Pause

› ^{Choose one of the available list entries}B .

Within 3 seconds of starting playback, tap: play

the previous song

To Clear, in the menu media

tap on Manage favour-

›

ites

.

After 3 seconds from the start of playback, tap:

to play the current title from the beginning

To delete a favourite, tap on the list entry and con-

ﬁrm the deletion.

›

Hold: fast rewind within the track

Tap: play the next track

Or:

To delete all favourites tap on Clear all and conﬁrm

the deletion.

›

Hold: fast forward within the track

Movement within the title is also possible by drag-

ging the ﬁnger over the timeline.

Traﬃc

To turn on/oﬀ traﬃc monitoring during playback

of media ﬁles, go to the Media in the main menu

›

Advanced operation

and tap on Traﬃc program (TP)

.

Turn on / oﬀ repeat playback of the current

track

94 Infotainment Bolero › Media

Supported sources and ﬁles

Supported sources

Source

Interface

Type

MSC

Speciﬁcation

File system

USB stick

HDD

(without special

software)

USB devices that

use the USB mass

storage support

protocol

Devices running

the Android or

Windows Phone

operating system

that support the

Media Transfer

Protocol

VFAT

FAT16

FAT32

exFAT

NTFS

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

MTP

Devices with the

iOS operating sys-

tem and the iAP2

protocol

Bluetooth® proto-

cols

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

A2DP and AVRCP

(1.0 - 1.6)

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code:

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio ﬁles

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

MPEG 1 Layer 2

MPEG 2 Layer 2

MPEG 1 Layer 3

MPEG 2 Layer 3

MPEG 2.5 Layer 3

32 - 384

8 - 160

32 - 320

32, 44, 48

16, 22, 24

32, 44, 48

16, 22, 24

8, 11, 12

Mono, stereo,

Joint stereo

Mono, dual mono,

Stereo, Joint

Stereo

mp2

mp3

MPEG

8 - 160

Infotainment Bolero › Media 95

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

Windows Media

Audio 7

Windows Media

Audio 8

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

Windows Media

Audio 10

8, 16, 22, 32,

44, 48, 96

6 - 192

8 - 384

8 - 768

8 - 320

32 - 768

8, 11, 16, 22,

32, 44, 48,

96

Mono, stereo,

Joint stereo

WMA

ADTS

wma

aac

32, 44, 48,

96

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

8, 11, 12, 16,

22, 24, 32,

44, 48, 64,

88, 96, 192

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

AAC LC

16 - 2048

Stereo

AAC HE

AAC HEv2

M4A LC

16 - 400

16 - 64

8 - 576

MP4

OGG

FLAC

m4a

ogg

ﬂac

M4A HE

M4A HEv2

Mono,

Stereo

OGG-Vorbis

FLAC

Mono, stereo,

Joint stereo

-

Mono,

Stereo

RIFF

Monkey's

SBC

WAV

wav

ape

-

64 - 3072

8 - 192

Monkey's

8, 11, 12, 16,

22, 24, 32,

44, 48

Mono, stereo,

Joint stereo

Bluetooth A2DP

8 - 345

Mono, stereo,

Multichannel

OPUS

opus

6 - 2000

8 - 48

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported video ﬁles

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

mpg

mpeg

m1v

mPV

mpg

mpeg

ps

MPEG 1

1.5

15

MPEG 2

m2v

m4p

mp4

m4v

mp4v

mov

Xvid

MPEG 4 (H.264)

MPJEG

50

20

MPEG 4 (ISO)

Xvid

96 Infotainment Bolero › Images

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

wmv

asf

WMV9

50

Supported playlists

Codec type

File extension

M3U

M3U8

PLS

m3u

m3u8

pls

WPL

ASX

wpl

asx

▶

Stop slideshow

Images

B

View image

Overview

▶

Turn left

Display menu

Turn right

Tap

.

›

Show in output size

Image viewer

Gesture control

Display of the next im-

age

▶

Display the previous

image

A Select source

Manage ﬁles

Settings

Increase the image size

Reduce the image size

Operation

Operation using functional areas

A

View images

▶

Show the next image

▶

Show the previous image

Start slideshow

Infotainment Bolero › Mobile device management 97

Use only media carriers, Bluetooth® devices, and

mobile devices that contain no harmful data or

malware.

›

Rotate by 90 °

▶

Regularly update the software provided by ŠKODA

AUTO.

›

We recommend having the system software and

components updated by a specialist company.

WARNING

Risk of an accident!

Settings

Malware in the vehicle can inﬂuence and deactivate

certain vehicle functions, or take over the controls of

these where applicable.

The following Infotainment functions are set in the

menu:

Display image size

▶

If the vehicle reacts in an unusual way, immediately

reduce speed or stop the vehicle.

▶

Display image duration during the slideshow

Slideshow repeat

Seek the help of a specialist garage.

▶

WARNING

Malware in the vehicle may gain unauthorised access

to the information and data of the vehicle, and on oc-

casion, to connected mobile devices.

Supported sources and ﬁles

Supported sources

Source

Interface

Speciﬁca- File system

tion

Overview

USB 1.x; 2.x USB stick

VFAT

FAT16

FAT32

exFAT

NTFS

Using mobile device management, devices can be

connected, disconnected, and interchanged.

3.x

or higher

with USB

HDD

(without

special

USB

Display mobile device management

2.x support software)

Tap on

Manage mobile devices.

›

Supported ﬁles

Codec type

File extension Max. resolution

[Mpx]

BMP

bmp

4

JPG; JPEG

jpg; jpeg

4 (Progressive

Mode)

64

GIF

gif

4

PNG

png

4

The maximum supported image size is 20 MB.

The device enables a connection via the Blue-

tooth®“hands-free proﬁle”

The device is connected via the Blue-

tooth®“hands-free proﬁle”

The device enables a connection via the Blue-

tooth® audio proﬁle

Mobile device management

Cybernetic security

Your vehicle contains components that are used to

exchange information and data between the vehicle

and the connected mobile devices or the Internet.

The device is connected via the Bluetooth® audio

proﬁle

Remove the device from the list previously con-

nected devices

The device enables a SmartLinkconnection to be

made via Android Auto

The device enables a SmartLinkconnection to be

made via Apple CarPlay

These components have security mechanisms that

minimise the risk of unauthorised access to the vehi-

cle systems.

Regular software updates help reduce the risk of un-

authorised access to vehicle systems and vehicle

functions. The following guidelines must therefore

be observed:

The device enables a SmartLinkconnection to be

made via MirrorLink

Connected / Previously connected devices

A

Available devices

B

98 Infotainment Bolero › Telephone

Limitations of mobile devices and applications

Connection set-up

Availability of features

Connect a mobile device to Infotainment

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

Find available Bluetooth® devices in the mobile de-

vice.

›

Select the Infotainment Bluetooth® unit.

›

Compatibility of mobile devices

The unit name can be determined by tapping

It is possible to check the ŠKODAweb pages to see if

Infotainment is compatible with the selected mobile

device being tested. This check is carried out by us-

ing the following reference or by reading the QR

code:

Manage mobile devices

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

device name:.

›

Connect Infotainment to a non-paired mobile de-

vice

Manage mobile devices

Select the desired device from the list of available

devices.

http://go.skoda.eu/compatibility

.

›

Select the desired Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

All information given is incidental and serves as in-

formation.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

Connect Infotainment to a previously connected

mobile device

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

Manage mobile devices

.

›

Or:

Select mobile phone

.

›

Select the desired device from the list of previous-

ly connected devices.

Select the desired Bluetooth® proﬁle.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Applications in mobile devices

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

SmartLink connection

Infotainment provides the ability to connect Smar-

tLink to compatible mobile devices using the follow-

ing connection types:

Due to the variety of applications, as well as their on-

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Android Auto

Apple CarPlay

MirrorLink

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Mobile devices can be connected to the Infotain-

ment via USB cable or Wi-Fi, as long as the mobile

device supports it.

Information about ŠKODAapplications

Detailed information about ŠKODA applications can

be found on the website after reading the following

QR code or link:

Connect the mobile device to the Infotainment via

a USB cable or browse and connect to a wireless

network.

›

Tap the icon of the supported connection.

›

http://go.skoda.eu/mobile-apps

Telephone

Overview

Display menu

Tap

.

›

Or:

Infotainment Bolero › Telephone 99

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

Tap

.

›

If the menu phone is not displayed, check wheth-

er the mobile device is connected.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

To display the contact list in the phone menu, tap

›

on

.

To search within the list, tap on Enter contact

Enter the details you wish to ﬁnd.

.

›

To establish a connection with a contact, tap the

functional area showing the desired contact.

If a contact has multiple telephone numbers, select

the telephone number from the displayed list.

A Name of the connected telephone

Tap: Show list of previously connected phones

▶

To display the details for a contact, tap

.

›

B Name of telephone service providers

Establish a connection to the voice mailbox num-

ber

▶

If the symbol is displayed in front of the name,

roaming is active.

In the Phone menu, tap on

.

›

C Preset buttons for preferred contacts

Telephone conversation

Depending on the context of the telephone conver-

sation, the following functions can be selected:

Change the main telephone with the additional

telephone

Enter telephone number

Contact list

End connection / reject incoming call / end call

Answer an incoming call / return to the held call

Text messages / emails

Call lists

Switch the ringer oﬀ / on

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

/

Settings

Reject an incoming call using an SMS message

Answer a call from the second telephone during

a call on the ﬁrst telephone

The ongoing call on the ﬁrst telephone is termi-

nated by accepting the call.

Conditions for connecting a telephone with

Infotainment

✓ The Bluetooth® function of the Infotainment and

To switch the call tone from the speakers to the

telephone, go to telephone in the menu and tap on

›

the telephone needs to be switched on.

The Bluetooth® function of the Infotainment is

speakerphone

.

switched on in the menu item

Manage mo-

To switch the call tone from the telephone to the

speakers, tap

bile devices

Bluetooth.

.

✓ Visibility of the Infotainment is switched on.

Conference call

The visibility of the Infotainment is switched on in

A conference call is a joint telephone conversation

with a minimum of three and a maximum of six par-

ticipants.

the menu item

Manage mobile devices

Visibility

.

✓ The telephone is within signal range of the Info-

Make the next call during an ongoing conversation/

conference.

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

›

Or:

Accept a new incoming call by tapping

.

›

Telephone operation

Enter telephone number

To start a conference call, tap

.

During an ongoing conference call, the following

functions can be selected depending on the context:

In the Phone menu, tap on

Enter the telephone number using the numeric

keypad that is displayed.

.

›

Hold the conference call and leave temporarily

(the conference will continue in the background)

Return to the held conference call

The displayed numeric keypad can also be used

for searching for contacts.

100 Infotainment Bolero › Telephone

Switch the microphone oﬀ / on

End conference call

Show details of the conference call

Select the desired e-mail.

/

›

To switch graphic notiﬁcations regarding the re-

ceipt of a new email on or oﬀ, tap in the Phone

In the details of the conference call, depending on

the connected telephone, the following functions

can be selected:

menu New message notiﬁcations

.

Settings for Infotainment telephone functions

Show details of the conference call partici-

pants

End conversation with the conference call par-

ticipant

Conversation with a participant outside of the

conference call

Telephone-Infotainment-Connection types

The way in which the telephone is connected de-

pends on the number of phones currently connected

to the Infotainment:

No telephone - The telephone is connected as a

main telephone.

One telephone - The telephone is connected as an

additional telephone.

Two telephones - Select the telephone to be re-

placed.

▶

Send a text message

In the Telephone

menu, tap Messages

New

›

SMS

.

Write a text message and conﬁrm; a view of the

message is displayed.

›

The message can be edited when the text area

within the view is tapped.

To switch between the main telephone and the

additional telephone, tap on in the Phone menu.

›

Search for or select the recipient of the message.

Add more recipients or conﬁrm selected recipi-

ents.

›

Connect the telephone to Infotainment

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

›

Tap on Send

.

›

The unit name can be determined by the menu

Display received text messages

item

Manage mobile devices

Device name:.

In the Telephone

menu, tap Messages

or

›

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

.

Messages that are received are displayed as indi-

vidual messages or as messages in a conversation,

depending on the following setting.

›

Connect Infotainment to a non-paired telephone -

no telephone is connected

Tap on

.

›

To switch the display of messages in a conversa-

Or:

tion on or oﬀ, tap in the Phone

menuShow messag-

Tap on

.

›

es as conversation

.

Follow the instructions in the Infotainment screen.

To switch graphic notiﬁcations regarding the re-

ceipt of a new message on or oﬀ, tap in the Phone

›

Connecting Infotainment to a non-paired tele-

phone - another telephone is connected

menu New message notiﬁcations

.

Tap on

Manage mobile devices.

›

Infotainment oﬀers the possibility to read the

text message (context-dependent) by means of the

generated Infotainment voice if is tapped.

Select the desired device from the list of available

devices.

Select the desired Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Send e-mails

In the Telephone

menu, tap Emails

New

›

emails

.

The telephone is connected as an additional tele-

phone.

Write an e-mail and conﬁrm that an e-mail is dis-

played.

›

Or:

The text can be edited when the text area within

the view is tapped.

Search for or select the recipient of the email.

If two telephones are connected to the Infotain-

›

ment, select the telephone to be replaced.

Add more recipients or conﬁrm selected recipi-

ents.

Enter the subject of the e-mail.

Connect Infotainment to a previously paired tele-

phone

›

Manage mobile devices

.

›

Tap on Send

.

Or:

Show received e-mails

In the Telephone

menu, tap Emails

.

›

Infotainment Bolero › Wi-Fi 101

For setting the Infotainment ringtone in the

Select mobile phone

.

›

phone

menu select the ringtone

.

Select the desired device from the list of previous-

ly connected devices.

›

Select the ringtone.

The telephone is connected as an additional tele-

phone.

Number for the voice mailbox

For setting the voice mailbox number in the

›

phone

menu Mailbox number:

.

Or:

If two telephones are connected to the Infotain-

ment, select the telephone to be replaced.

Enter the voice mailbox number.

›

Turn the graphic notice regarding receiving a new

message/email on or oﬀ

When the feature is on, the new message icon ap-

pears on the status bar and in the feature area for

the messages when a new message/e-mail is re-

ceived.

Manage preset buttons for preferred contacts

In the Telephone

menu New message notiﬁcations

.

›

Simultaneous calls

This applies to some countries.

Depending on the connected telephone, it is possible

to answer the next incoming call and hold the previ-

ous call.

› ^{To save the desired preset button, hold}A .

To switch on simultaneous calls, tap on telephone

›

Select a contact from the displayed list.

›

Parallel talks.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

Wi-Fi

To display the menu for deletion, go to the phone

›

menu

and tap on Manage favourites

.

Overview of available hotspots

To delete one preset, tap on the list entry and con-

ﬁrm the deletion.

›

Display available hotspots

Tap

Wi-Fi Wi-Fi:.

›

Or:

To delete all station buttons, tap Clear all and conﬁrm

the deletion.

›

Import telephone contacts

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

Infotainment can import up to 5000 telephone con-

tacts together with contact pictures. Each contact

can include max. 5 telephone numbers.

A Previously connected hotspots

Depending on the type of telephone, import conﬁr-

mation may be required.

B Available hotspots

C The hotspot supports the WPS connection

Currently connected hotspot

Update telephone contacts

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

Delete information about the hotspot connection

Wi-Fi signal strength of the hotspot

The Wi-Fi signal from the hotspot is not available

For manual update of the list in the phone

›

menu tap on Import contacts

.

Sort contacts in the phone book

In the Telephone

sorting type.

menu Sort by: Tap and select the

›

Functionality

Ringtone

The Wi-Fi can be used for the internet connection or

for the SmartLinkConnection.

Some phones do not allow the use of the telephone

ringtone; instead, the Infotainment ringtone is used.

102 Infotainment Bolero › Wi-Fi

The Infotainment hotspot can connect up to 8 mo-

bile devices. At the same time, the Infotainment can

be connected to another hotspot.

Enter and conﬁrm the password.

▶

Quick connection of Infotainment to the mobile

device hotspot

On the mobile device, turn on the hotspot, its visi-

To display the list of connected mobile devices, tap

›

Wi-Fi Infotainment system as hotspot Connected devi-

bility, and the option for WPS connection.

ces.

Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button)

.

›

Automatic WPS connection

Settings

Tap

Wi-Fi Quick connection to Infotainment system.

›

In the mobile device, switch on the option for con-

nection via WPS.

Wait for the connection to be established and, if

›

Connect a mobile device to the Infotainment hot-

spot

›

Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

›

necessary, conﬁrm the respective messages.

Wi-Fi Infotainment system as hotspot

Use as hotspot

.

Manual WPS connection

Turn on the Wi-Fi on the mobile device.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

In the mobile device, switch on the option for con-

nection via WPS PIN.

›

The mobile device display will show the WPS PIN

for connecting to the Infotainment.

The name of the Infotainment is taken from the

menu item

Wi-Fi Infotainment system as hotspot

Tap

Wi-Fi Quick connection to Infotainment system

›

Network name:

.

WPS PIN.

Select the Infotainment hotspot and enter the re-

quired password.

Enter the WPS PIN in the Infotainment and con-

ﬁrm.

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

The password for connecting to the Infotainment

hotspot is taken from the menu item

Wi-

Fi Infotainment system as hotspot Network key

Conﬁrm the connection.

.

Automatic connection using the QR code

›

Wi-Fi Tap quick connection with infotainment system

In the mobile device, switch on the option for con-

nection via QR Code.

With the mobile device, read the QR code dis-

played on the Infotainment screen.

Wait for the connection to be established and, if

.

›

Connect Infotainment to the mobile device hot-

spot

Turn on the Infotainment’s Wi-Fi unit in the menu

›

item

Wi-Fi WLAN: WiFi active switch on

Select the desired hotspot in the list of available

hotspots.

Enter the password for connecting to mobile devi-

ces.

necessary, conﬁrm the respective messages.

Tips for a perfect connection

Keep only the hotspot to be connected switched

on and switch oﬀ the other hotspots.

Delete unused hotspots. This shortens the time re-

quired to establish a connection.

For some hotspots, the connection takes longer, so

wait for the connection to ﬁnish.

If the connection is interrupted, recheck the availa-

ble hotspots and repeat the connection.

▶

Infotainment stores passwords for previously

connected hotspots.

Security level of the Infotainment hotspot

The security level is set at WPA2 and cannot be

changed.

Activate/deactivate data transfer between the In-

fotainment and the connected device

To turn data transmission on or oﬀ, tap

›

Wi-Fi Infotainment system as hotspot Connected devices

.

Function restriction

Change the name of the Infotainment hotspot

▶ Tap

name:

Wi-Fi Infotainment system as hotspot Network

The Infotainment system can only be connected to a

hotspot with WPA2 access protection.

.

Enter the name and conﬁrm.

▶

Restriction of the Wi-Fi connection

Change password for connection to Infotainment

hotspot

The password must be a minimum of 12 and a maxi-

mum of 63 characters.

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

▶

Wi-Fi Infotainment system as a hotspot Network key

.

Infotainment Bolero › SmartLink 103

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

Android Auto

SmartLink

Functionality

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

Overview of running applications, phone calls, in-

coming text messages, and more.

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

Turn on voice control (Google Voice)

Apple CarPlay

Mobile devices can be connected via a USB cable or

WiFi.

Supported connection types

SmartLink supports the following connection types:

Android Auto

Apple CarPlay

MirrorLink

▶

Overview of the SmartLink connection

Menu SmartLink

A

B

List of available applications

Depending on the duration of operation:

Tap

.

›

Tap: Return to the menu Apple CarPlay

Hold: Turn on voice control (Siri)

▶

MirrorLink

A Previously connected device

B Currently connection device

Display information about SmartLink

Disconnection of the active connection

Settings in SmartLink menu

It is not possible to operate the application while

driving

Return to the menu SmartLink

List of running applications

Display of the last running application in connec-

ted mobile devices

Settings

104 Infotainment Bolero › SmartLink

Connection conditions

Restriction

General connection conditions

Restriction of the Wi-Fi connection

✓ The mobile device supports the type of Smar-

tLink connection Android Auto, Apple CarPlay or

MirrorLink.

✓ Mobile devices, as well as the type of SmartLink

connection, are supported in the respective mar-

ket.

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

✓ Some connected mobile devices require the mo-

bile device to be “unlocked”.

Restriction of SmartLink applications while driving

For reasons of safety, the operation of some Smar-

tLink applications while driving is not possible or only

limited.

Conditions for Android Auto

✓ The device to be connected must have Android

Auto connection.

A list of devices, supported regions and applica-

tions that support the Android Auto connection

can be found on the Google, Inc. website.

Restriction of the navigation function

If route guidance is currently being carried out

through Infotainment, this is ended when you start

route guidance in the Apple CarPlay application.

✓ The Android Auto application needs to be instal-

led on the mobile device.

✓ Some applications require the data connection in

the mobile device to be turned on.

✓ Connect the mobile device for the ﬁrst time

If there is route guidance in the Apple CarPlay appli-

cation, it is ended by starting the destination guid-

ance using Infotainment.

when the vehicle is stationary.

SmartLink settings

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlay connection.

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

A list of devices, supported regions and applica-

tions that support the Apple CarPlay connection

can be found on the Apple Inc website.

›

✓ Siri voice control is on.

✓ The data connection in the mobile device is

Choose to connect via Apple CarPlay.

›

Apple CarPlay - Connection via Wi-Fi from Info-

tainment

switched on.

Conditions for MirrorLink

✓ The device to be connected must have MirrorLink

connection.

Turn on Bluetooth® and Bluetooth® visibility in the

Apple mobile device.

›

Tap on

Manage mobile devices.

›

In the displayed list, look for and select the desired

device with the symbol

A list of devices and applications that support the

MirrorLink connection can be found on the web-

sites of Car Connectivity Consorcium®.

.

Follow the instructions on the Infotainment screen

and conﬁrm the Bluetooth® pairing.

If another device is connected to the Infotainment,

select the device to be replaced.

›

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

Apple CarPlay - Connect via Wi-Fi from mobile de-

vices

To establish a connection, the following conditions

must be met:

Operation

Operation of the running MirrorLink application

✓ The minimum iOS version is 9.

✓ No other mobile device can be connected via

Display of control surfaces at the bottom

Display of control surfaces at the top

Return to the menu MirrorLink

SmartLink.

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

In the mobile device, turn on the CarPlay function.

›

Press and hold the

steering wheel.

button on the multifunction

Infotainment Bolero › SmartLink 105

The Infotainment screen displays a connection

message with the name of the Bluetooth® unit of

the Infotainment.

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

Connect the mobile device to the front USB input

using a cable.

Choose to connect through MirrorLink.

›

MirrorLink - Disconnect

In the MirrorLink menu, tap on

.

›

Tap on

.

In the Infotainment screen, select the connection

type Apple CarPlay.

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

Apple CarPlay - Disconnect

In the Apple CarPlay menu, tap on the function

area “ŠKODA”.

›

Tap on

.

›

Select the desired device or connection type.

Tap on

.

›

Android Auto - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Android Auto.

›

Android Auto - Connection via Wi-Fi from Info-

tainment

Tap on

mobile devices.

›

Select the desired device from the list of available

devices.

Select the Bluetooth®hands-free proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

If another device is connected to the Infotainment,

select the device to be replaced.

From the list of known devices, select the desired

›

device with the symbol.

Android Auto - Connect via Wi-Fi from mobile de-

vices

To establish a connection, the following conditions

must be met:

✓ The minimum Android version is 5.

✓ No other mobile device can be connected via

SmartLink.

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

In the Infotainment screen, select the connection

›

type Android Auto.

Android Auto - Disconnect

In the Android Auto

DA”.

menu, tap “Return to SKO-

›

Tap on

.

›

MirrorLink - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

›

Infotainment Bolero for Your Skoda Kodiaq SUV Second Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals