26 Keys, locks and alarm system › Keyless locking (KESSY)
Automatic locking after starting
All doors and the boot lid are locked when a speed of
15 km/h is reached.
Release the door handle.
›
Locking the door without the lock cylinder
The vehicle is unlocked when a door is opened from
the inside.
WARNING
An automatically locked vehicle makes it difficult for
responders to enter the vehicle in an emergency.
Troubleshooting
Central locking fault
Open the door.
For vehicles with a panel over the opening, remove
the panel.
Insert the key or a flat-head screwdriver into the
slot.
Turn the key or flat-head screwdriver towards the
outside of the vehicle (spring-loaded position).
›
The warning light in the driver's door first flashes
▶
for 2 secs in quick succession.
›
Then it lights up continuously.
After 30 secs, it flashes slowly.
▶
▶
›
Seek the help of a specialist garage.
›
›
Mechanically unlocking and locking the door
After closing, the door is locked.
Unlocking and locking the door with the lock cylin-
der
Keyless locking (KESSY)
Usage
Remove the cover
Pull on the door handle
of the vehicle and hold
it.
›
The keyless locking system, KESSY, enables unlock-
ing and locking of the vehicle without actively using
the remote control key.
Insert the key bit into
the recess on the un-
derside of the cover.
›
Lift the cover in the di-
rection of the arrow.
›
Operation
Keep the key with you when unlocking and locking.
Release the door han-
dle.
›
The sensors on the handle are intended to be operat-
ed with bare hands, e.g. wearing gloves may affect
the function of the sensors.
Unlocking and locking
using a key with a fold-
out key bit
Release
Left-hand drive: Insert
›
Grab the door handle.
Open the door.
›
›
the key with the but-
tons facing upwards
into the lock cylinder
and unlock or lock.
Right-hand drive: In-
sert the key with the
buttons facing down-
›
wards into the lock cylinder and unlock or lock.
Unlocking and locking using a key with a removable
key bit
Insert the removed key bit with the handle facing
downwards into the lock cylinder and unlock or
›
lock it.
Install cover
Pull on the door handle and hold it.
Replace the cover.
›
›