36 Seats, steering wheel and mirror › Folding the backrests forward from the luggage compartment
Each of the memory buttons on the driver's seat can
be used to store and recall the set driver's seat and
exterior mirror position.
Turn the exterior mirror knob to the position
Engage reverse gear.
Adjust the mirror to the desired position.
Disengage reverse gear.
.
›
›
›
›
Depending on the equipment, the front passenger
seat may also have a memory function.
The set mirror position is saved.
When changing the stored seat and exterior mir-
ror position for forward driving, the passenger exte-
rior mirror position for reverse driving must be re-
stored.
Operation
Retrieve stored position
With the ignition off and the driver’s door open,
press the desired memory button.
›
In other instances, hold the button for example
with the ignition switched on or the driver's door
closed.
›
Folding the backrests forward from the
luggage compartment
The passenger seat position can be retrieved in the
same way.
Stop position change
With the ignition off and the driver's door open,
press any button on the seat to be adjusted.
›
Or:
Press the button on the key.
›
In other cases, release the held memory button.
›
Settings
Second row of seats
Storing driver's seat and exterior mirror position
for driving forwards
Setting the second row of seats
Move seats in a longitudinal direction
Turn on the ignition.
Adjust the seat and the
exterior mirrors.
›
›
› Pull the lever A and
move the seat.
› Press the button A
and within 10 seconds
one of the memory
buttons B .
The seat must audibly
click into place.
Storing is confirmed by
an acoustic signal.
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
Adjusting the inclination of the seat backrests
› Pull on the loop A and
adjust the inclination of
the seat backrests.
Save front passenger seat position
Storing the passenger seat position is analogous to
storing the driver's seat position.
The rest must click in-
to place.
Storing front passenger´s exterior mirror position
for reversing
Turn on the ignition.
Activate the folding function of the mirror in the
Infotainment in the following menu:
›
›
Access to the third row of seats
Applicable to the seven-seater variant of the vehicle.
Or:
English 
