Starting and driving -> Auto Hold automatic holding function for Your Skoda Kodiaq SUV Second Generation (2024-2026)

Starting and driving › Auto Hold automatic holding function 177  
Manual switch on  
Emergency braking in case of faulty brake  
system  
Pull the button  
hold it.  
and  
Switching on  
The following symbols  
light up.  
Pull the button  
hold it.  
and  
in the button.  
in the instrument  
cluster.  
The vehicle starts to  
brake sharply and an  
acoustic signal is soun-  
ded.  
Automatic shut-off  
The parking brake switches off automatically when  
starting up.  
Switching off  
If automatic switch-off is to be prevented, e.g. when  
starting off on a slope, keep the button  
Release the button  
.
pulled.  
Or:  
Conditions for automatic shutting down  
Driver's door is closed, in some cases, the driver's  
Depress the accelerator pedal.  
seat belt is also fastened  
Manual shut-down  
Auto Hold automatic holding function  
Usage  
With the ignition  
switched on, press the  
brake pedal and at the  
same time push the  
button.  
Auto Hold automatically secures the vehicle from  
rolling away when stopped.  
Functionality  
WARNING  
Risk of an accident!  
Auto Hold is not able to stop the vehicle under all cir-  
cumstances, such as on slippery ground, or on gradi-  
ents.  
Troubleshooting  
Parking brake error  
Secure and release the vehicle  
With Stop, the vehicle is automatically secured us-  
illuminates  
ing Auto Hold.  
lights up in the instrument cluster.  
The brake pedal can be released.  
Message regarding a parking brake error  
With Start, the vehicle is automatically released us-  
ing Auto Hold.  
Seek the help of a specialist garage.  
Parking on a steep slope  
Automatic protection from the parking brake  
Under certain circumstances, the vehicle can be se-  
flashes  
cured using the parking brake.  
strument cluster.  
lights up in the in-  
Notification regarding parking position on a steep  
slope  
Go to another parking spot where there is less of a  
slope.  
Operating conditions  
Noise when using the parking brake  
Noise when using the parking brake is normal. This is  
not a defect.  
The driver's door is closed.  
The engine is running or has been switched off by  
the START-STOPP system.  
Auto Hold is activated.  
The 12 volt vehicle battery is discharged, the park-  
ing brake cannot be switched off  
On vehicles with an automatic gearbox, the selec-  
Connect the 12 volt vehicle battery to a power  
source, such as the 12 volt vehicle battery of an-  
other vehicle.  
tor lever is not in mode.