58
Seats and Storage
Storing setting
Memory buttons
Memory for the seat offers the possibility to store the individual driver seat and
external mirror position. An individual position can be allocated to each of the three
A page 58, fig. 56, that is three in total. By pressing the appro-
memory buttons D
A the seat and external mirror will automatically move into the
priate memory button D
position allocated to this button page 59.
Note
When storing settings with the memory buttons, we recommend that you begin
with the front button and assign a memory button to each additional driver.
Fig. 56 Driver seat: Memory
Each new setting stored with the same button erases the previous setting.
buttons and the button MEM
OFF
Each time you store the seat and exterior mirror settings for driving forward you
also have to re-store the individual setting of the exterior mirror on the passenger side
Storing seat and exterior mirror settings for driving forward
for reversing.
– Switch on the ignition.
Assigning radio remote control* to the memory buttons
– Adjust the seat page 57.
– Adjust both exterior mirrors page 54.
After storing the settings of the seat and exterior mirrors, you have 10 seconds in order
A and hold the button pressed for about 3
– Press one of the memory buttons D
to assign the radio remote control to the appropriate memory button.
seconds until an audible signal confirms that the setting has been stored. The
– Withdraw the ignition key.
setting of this button was stored.
– Press the release button page 39 and hold it pressed for 1 second until an
audible signal confirms that the setting has been stored. The setting is stored with
Storing exterior mirror setting for reversing*
the memory button which you have selected.
– Switch on the ignition.
If you wish to be able to retrieve the settings which are stored in the memory by also
– Turn the exterior mirror control to position page 54.
using the radio remote control, you have to assign the radio remote control to a
– Engage the reverse gear.
memory button in each case.
– Move the right exterior mirror into the desired position page 54.
If you wish, you can obtain an additional remote control key from a specialist garage
A and hold the button pressed for about 3
– Press one of the memory buttons D
and then assign the remote control key to another memory button.
seconds until an audible signal confirms that the setting has been stored. The
setting of the selected button was stored.
Note
If the radio remote control had previously been assigned to another memory
A . The seat and
The memory system can be deactivated at any time with the button E
button, this setting is then erased by the new assignment.
the exterior mirrors can also be manually operated.
English 
