Get Driver information system Guide for Skoda Octavia 4 Door Fourth Generation (2021-2026)

64 Driver information system › Analogue instrument cluster

Trip - Distance travelled after resetting the

memory

F

Driver information system

Analogue instrument cluster

Overview of the main menu items

Driving data » page 66, Overview

Assist systems - Activate/deactivate assist sys-

tems

▶

Overview

▶

Overview of instrument cluster

Navigation - e.g. Display driving recommendations,

compass, list of destination

▶

Audio - Using radio and media

Telephone - Call list, accept or reject an incoming

call

▶

Vehicle - Vehicle condition » page 68, Display.

▶

Operation

Operation via the control lever

A

B

C

D

E

Tachometer with indicator lights

Display

Press - Switch be-

tween menu items /

set values

Hold - Display the

main menu

Speedometer with indicator lights

Bar with indicator lights

Depending upon vehicle equipment:

Press - Conﬁrm

B

Coolant temperature gauge

Gas gauge

▶

menu item

▶

Operation via the multifunction steering wheel

F

Petrol/diesel fuel gauge

Turn - Switch be-

tween menu items /

set values

Press - Conﬁrm

menu item

A

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

Press - Show main

menu / Movement in

the main menu

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

Press - Show main

menu / Movement in

the main menu

Display overview

Depending on the equipment, the following informa-

tion is shown in the display.

Time

A

B

Settings

Selected gear/gear

recommendation

Setting the language

The language is set in the Infotainment in menu

.

Also included de-

pending on vehicle

equipment:

Setting the time

The time is set in the Infotainment in menu

Compass direction

display

▶

.

Resetting the odometer in the instrument cluster

Automatic gearbox

selector lever posi-

▶

Select Trip in the menu in instrument cluster display.

›

tions

Detected road signs

▶

Menu, indicator lights and information

C

D

Outside temperature

- low outside temperature

Total distance travelled

E

Driver information system › Digital instrument cluster 65

Operation

Turn - Select infor-

mation

A

Overview of the buttons/dials on the multifunction

steering wheel

Press - Conﬁrm in-

formation

Rotate - Switch be-

tween menu items /

set values / change

map scale manually

A

Hold - Reset counter

Press - Conﬁrm

menu item

Setting the brightness of the instrument cluster

lighting

The brightness is adjusted automatically according

to the given lighting conditions.

Turn and press -

Switch on automatic

change of map scale

Change variant of

the display presentation / Show menu items of

the submenu on the left side of the display

Change variant of the display presentation /

Show menu items of the submenu on the right

side of the display

The manual brightness adjustment is carried out as

follows when the dipped beam is switched on:

In Infotainment, select the following menu:

›

Interior Ambient light

Or:

Show menu with selected information in the dis-

play

To display the menu on the right side of the display,

Interior Ambient lighting

›

Adjust the setting.

›

A.

press the setting wheel

To display the menu on the left side of the display,

press the control wheel A twice.

›

Digital instrument cluster

Overview

To switch between information, turn the setting

›

A.

wheel

Overview of instrument cluster

To conﬁrm the information selection, press the set-

›

A.

ting wheel

Certain information contains a submenu.

To display the submenu, press the or key.

To switch between menu items on the submenu,

turn the control wheel A .

›

The option to switch between information is indi-

cated by arrows. This is only possible for a short

time.

A

B

Bar with indicator lights

Settings

Depending upon vehicle equipment:

Setting the language

The language is set in the Infotainment in menu

.

Coolant temperature gauge

Gas gauge

▶

C

D

E

Fuel gauge

Display

Setting the time

The time is set in the Infotainment in menu

.

Display area with selected information for the

driver

Setting the brightness of the instrument cluster

lighting

The brightness is adjusted automatically according

to the given lighting conditions.

F

Central display area

NOTICE

The manual brightness adjustment is carried out as

follows when the dipped beam is switched on.

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

In Infotainment, select the following menu:

›

Interior Ambient light

66 Driver information system › Head-Up display

Or:

Interior Ambient lighting

Interior

Adjust the setting.

By moving your ﬁnger sideways, choose the screen

›

with the menu item Head-Up display

.

Set the variant of the display

Press the button or on the multifunction steer-

ing wheel to change the variant of the display pre-

sentation.

Select Head-Up display

.

›

In the displayed menu, the following menu items can

be set:

Activation/deactivation

Position

Brightness

Colour scheme

Selection of projected information

▶

Select displayed variants

The position can also be set by turning the dial A

on the multifunction steering wheel.

Depending upon vehicle equipment:

A

B

C

D

E

Classic display

Navigation announcements

Driver Assist

Basic display

Driving data

Overview

Sporty display (depending on equipment)

The driving data display works with the ignition

switched on.

Head-Up display

Functionality

In the instrument cluster display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

The head-up display projects selected information

onto the windscreen into the driver's ﬁeld of vision.

For natural gas vehicles, the display of the instru-

ment cluster shows the natural gas quality in percent

from 70 % to 100 %. The higher the value, the lower

the consumption of natural gas.

In Infotainment

The following information is displayed in the Info-

tainment:

Restriction

The function may, for example, be restricted or un-

available due to strong sunlight.

Distance travelled

Driving time

Sunglasses with polarisation ﬁlters can negatively

aﬀect the visual perception of the display.

Average speed

Average fuel consumption

Range

Settings

Memory

The system saves the driving data in the following

memories:

Select the following menu:

›

Interior Head-Up display

Driver information system › Driving data 67

Since start

To display the menu on

›

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

the right side of the

display, press the con-

trol wheel A .

▶

To display the menu on

›

the left side of the dis-

play, press the control

wheel A twice.

Long-term

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance is stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

To switch between in-

formation, turn the

›

Since refuel

control wheel A .

Driving data from the time the fuel tank was last

ﬁlled is stored in the memory. The memory is reset

the next time the tank is ﬁlled.

▶

Displaying driving data in the infotainment system

The driving data is displayed in the following menu in

the infotainment system:

Operation

Or:

Display driving data in the display of the instru-

ment cluster via the operating lever

Select and reset the memory for driving data in

the display of the instrument cluster using the

control lever

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Press - Select infor-

mation/Set values

Press - Conﬁrm in-

formation

A

To select the memory

›

for the displayed driv-

ing data, press button

A repeatedly.

B

To reset the memory,

press and hold button

›

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

A .

Applies to the analogue instrument cluster.

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Applies to the analogue instrument cluster.

Rotate - Select in-

A

To select the memory

›

formation/Set values

Press - Conﬁrm in-

formation

for the displayed driv-

ing data, press control

wheel A repeatedly.

To resetthe memory,

hold the dial A .

›

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Applies to the digital instrument cluster.

68 Driver information system › Vehicle status

To set the memory for

›

the displayed driving

data on the right, press

button . Turn the dial

A to select the corre-

sponding memory or

press the dial to con-

ﬁrm the memory.

To select the memory

for the displayed driv-

ing data on the left,

›

A

B

Vehicle areas displayed in colour indicate associ-

ated warnings

press button . Turn the dial A to select the corre-

sponding memory or press the dial to conﬁrm the

memory.

Service appointments and vehicle identiﬁcation

number (VIN)

C

D

E

Tyre pressure monitor

To re-set the memory for the displayed driving da-

›

Information regarding engine oil level

ta, press button or . Turn the dial A to select

reset corresponding memory or press the dial to

conﬁrm the re-set.

Warning messages regarding the vehicle condi-

tion and their quantity

F

Range

Selecting the memory in the infotainment system

The memory selection is made by touching the cor-

responding tab in the infotainment screen in the fol-

lowing menu:

G

Deactivation/activation of the START-STOP sys-

tem

Functionality

Or:

In the event of a system fault, messages regarding

the fault in question are displayed on the instrument

cluster display when the ignition is switched on.

Resetting the memory in the infotainment system

The memory is reset in Infotainment as follows:

Messages in relation to faults can also be displayed in

the Infotainment.

In Infotainment, select the following menu:

›

Interior Instrument cluster

Or:

The warning messages will continue to be dis-

played until the malfunctions have been remedied.

After the ﬁrst display of the message, only the indi-

cator lights (Hazard) or (Warning) are dis-

played.

Interior Instrument cluster

Reset the associated memory by pressing the but-

›

ton

.

Button SET

Overview

Settings

Setting units

The units are set in the Infotainment in menu

.

The

button allows quick access to the settings of

the following vehicle systems (depending on the ve-

hicle ﬁttings):

▶

Switch oﬀ the START-STOP system » page 147,

Usage.

Switch oﬀ ASR traction control » page 156,

Overview.

Switch on the ESC Sport stabilisation pro-

gramme » page 156, Overview.

Vehicle status

Display

The vehicle status is displayed in the following menu

in the infotainment system:

▶

Interior monitoring » page 27, Settings.

Tyre pressure monitor » page 195, Functionality.

Access to selection and settings for driver assis-

tance systems

Or:

Access to other vehicle settings

▶

Driver information system for Your Skoda Octavia 4 Door Fourth Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals