2016-2023 Skoda Superb SUV Driver assist systems -> Speed limiter User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assist systems -> Speed limiter for Your Skoda Superb SUV Third Generation (2016-2023)

Driver assist systems › Pedestrian detection system 175  
If the limit is exceeded when driving downhill, brake  
the vehicle with the brake pedal.  
Troubleshooting  
Front Assist is not available  
Status display in the instrument cluster display  
illuminates together with  
illuminates - the cruise control is activated.  
Or:  
When the control starts,  
set limit is displayed.  
is highlighted and the  
illuminates together with  
illuminates - cruise control is active  
flashing - the set limit is exceeded  
Clean the front radar sensor.  
Stop the engine and start again.  
If Front Assist is still unavailable, check the brake  
lights on the vehicle or on the attached trailer.  
Replace the defective bulb.  
If the brake lights are working and Front Assist is  
still unavailable, seek the help of a specialist ga-  
rage.  
Operating conditions  
The driving speed is higher than 30 km/h.  
Operation  
There was an unfounded warning or system inter-  
vention  
Variant with cruise control  
Clean the front radar sensor.  
If the system is not working properly, disable Front  
Assist and seek the help of a specialist garage.  
Pedestrian detection system  
Functionality  
Pedestrian detection helps to avoid a collision with  
crossing pedestrians using automatic brake interven-  
tion.  
A
Activate GRA (condition for the subsequent  
activation of the limiter)  
Status display in the instrument cluster display  
To activate the speed limiter, press the D but-  
ton and the menu item Speed limit in the instrument  
cluster.  
lights up - Danger of collision  
Risk of collision in a speed range of 5-30 km/h  
The system triggers automatic braking.  
Deactivate limiter  
Interrupt control (sprung position)  
Resume control1) / Increase limit  
Risk of collision in a speed range of 30-60 km/h  
The system warns of a collision hazard first. If the  
driver does not respond, the vehicle is automatically  
braked.  
B
C
Start control at the current speed / reduce  
limit  
D
Show menu of assistance systems - Possibility  
to switch between GRA and speed limiter  
Functional conditions  
Switching to cruise control interrupts the con-  
trol.  
Front Assist activated.  
Driving speed between 5-60 km/h.  
Adjust the speed limit using the B and C keys  
Press for increments of 1 km/h.  
Speed limiter  
Functionality  
Hold for increments of 10 km/h.  
The speed limiter controls the maximum driving  
speed according to the set speed limit.  
1)  
If no speed limit is set, the current speed is set as the speed limit.  
176 Driver assist systems › Cruise control system  
Variant with ACC  
WARNING  
Risk of the cruise control system starting uninten-  
tionally!  
Deactivate cruise control after use.  
Status display in the instrument cluster display  
illuminated - the cruise control system is acti-  
vated  
illuminated - cruise control is active  
When cruise control starts, the set speed is  
displayed.  
Operating conditions  
The driving speed is higher than 20 km/h.  
Activate ACC (condition for the subsequent  
activation of the limiter). To activate the limit-  
er, press the button on the multifunction  
steering wheel and the menu item in the in-  
strument cluster Speed limit in the instrument  
cluster.  
Operation  
Operating with the lever  
Resume control1) / Increase limit in incre-  
ments of 1 km / h (sprung position)  
Interrupt control (sprung position)  
Deactivate limiter  
Increase limit in steps of 10 km/h  
Decrease limit in steps of 10 km/h  
Start control/Reduce limit in steps of 1 km/h  
A
Activate GRA (cruise control inactive)  
Disable GRA  
Exceeding the limit  
Disengage the accelerator pedal completely.  
Interrupt control (sprung position)  
Resume cruise control2) / Increase speed  
B
Control will continue as soon as the vehicle has de-  
celerated to below the set limit.  
C
Start control at the current speed / reduce  
speed  
D
Show menu of assistance systems - Possibility  
to switch between GRA and speed limiter  
Troubleshooting  
Speed limiter faulty  
Accelerate temporarily  
illuminates  
Depress the accelerator pedal.  
Get the help of a specialist company.  
Releasing the accelerator pedal will cause the speed  
to drop again to the set speed.  
Cruise control system  
Functionality  
Interrupt speed control  
After pressing the brake pedal.  
After an ESC intervention.  
The cruise control system (GRA) maintains the set  
speed without having to press the accelerator pedal.  
This, however, is only possible to the extent permit-  
ted by the engine output and braking power of the  
vehicle.  
1)  
If no speed limit is set, the current speed is set as the speed limit.  
If no speed is set, the current speed is adopted.  
2)  

Related Topics

Popular Owner Manuals