Keys, locks and alarm system › Memory function of the key 25
Adjust the mirror to the desired position.
Disengage reverse gear.
›
›
Memory function of the key
Functionality
The set mirror position is saved.
Applies to vehicles that do not have the personalisa-
tion function.
Central locking
Functionality
Each time the vehicle is locked, the position of the
driver's seat and rearview mirror are stored in the
memory of the remote key being used to lock the
vehicle.
Central locking system
The system unlocks and locks all doors, the fuel filler
flap and the luggage compartment flap at the same
time.
Operation
Unlock indicator: the flashing lights flash twice.
Lock indicator: the flashing lights flash once.
Retrieve saved position
Unlock the vehicle and open the driver's door.
›
The driver's seat and the exterior mirrors occupy the
position assigned in the memory to the key used to
unlock the vehicle.
The warning light in the driver's door will flash for
about 2 seconds in quick succession after the vehicle
is locked, then it will start flashing regularly at longer
intervals.
Stop position change
If none of the doors or the boot lid is opened
within 45 seconds of unlocking, the vehicle automat-
ically locks again.
Press any button on the seat to be adjusted.
›
Or:
Press the button on the key.
›
SAFE-Function
Depending on the equipment, the SAFEFunction can
be incorporated into the central locking system.
Settings
The SAFEFunction prevents the doors from opening
from the inside after locking the vehicle.
Activate and deactivate the memory function of
the key
The function is activated or deactivated in the fol-
The SAFEFunction turns on when the vehicle is
locked from the outside.
lowing menu in the Infotainment system.
After the ignition is switched off, a message regard-
ing the SAFEFunction is displayed on the instrument
cluster display.
Or:
DANGER
Risk of death!
Storing driver's seat and exterior mirror position
for driving forwards
The data is saved automatically each time the vehicle
When the vehicle is locked and SAFEFunction is
switched on, no people may remain in the vehicle.
▶
is locked.
SAFE-Turn off the function
By double locking within 2 seconds.
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
▶
Or:
Together with the deactivation of the interior sur-
▶
veillance » page 28, Settings.
Storing front passenger´s exterior mirror position
for reversing
The warning light in the driver's door will flash for
about 2 seconds in quick succession after the vehicle
is locked, then goes out and starts flashing regularly
at longer intervals after about 30 secs.
Unlock the vehicle with the key.
Turn on the ignition.
Activate the folding function of the mirror in the
Infotainment in the following menu.
›
›
›
If the SAFEFunction is switched off, the door can be
opened from the inside by pulling the opening lever
once.
Or:
The SAFEFunction is switched on again after unlock-
ing and locking the vehicle.
Put the knob for the exterior mirrors in position
Engage reverse gear.
.
›
›
English 
