Driver information system › Speed limit warning 65
Since start
Menu item for driving data
Or:
Driving data from the time of switching on the ig-
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
▶
Menu item for the driving data
Resetting the memory in the infotainment system
The memory is reset in the following menu in the in-
fotainment system:
Long-term
The driving data of all trips up to a total of 99
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
▶
Or:
Since refuel
Driving data from the time the fuel tank was last
filled is stored in the memory. The memory is reset
the next time the tank is filled.
▶
Settings
Select driving data to be displayed
The driving data to be displayed is selected in the
following Infotainment menu:
Operation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
Or:
Select the menu item for the driving data in the
main menu in the instrument cluster display.
›
Setting units
The units are set in the following infotainment menu:
Rotate - Select in-
A
formation/Set values
Press - Confirm in-
formation
Or:
Speed limit warning
Usage
Displaying driving data in the infotainment system
The driving data is displayed in the following menu in
the infotainment system:
The system offers the possibility to set a speed limit
beyond which an acoustic warning signal will sound
and the following warning message appears in the
display of the instrument cluster.
Menu item for driving data
Or:
Settings
Menu item for the driving data
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Setting the speed limit
Select Warning at or (depending on the display type)
›
and confirm.
When the vehicle is stationary, set the desired
speed limit and confirm.
While driving, drive at the desired speed and con-
firm it as the speed limit.
›
To select the memory
›
for the displayed driv-
ing data, press control
wheel A repeatedly.
›
To resetthe memory,
hold the dial A .
›
Resetting the speed limit
Select Warning at or (depending on the display type)
›
and confirm.
To reset the speed limit, confirm the stored value.
›
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Selecting the memory in the infotainment system
To select the memory, use the functional areas
in the following menu in the infotainment system:
English 
