Get Infotainment Swing Guide for Skoda Superb SUV Fourth Generation (2024-2026)

Infotainment Swing › Infotainment overview 67

Functionality

Infotainment Swing

After opening the driver's door, all the personalised

functions are adjusted according to the user account

that is assigned to the key which was used to unlock

the vehicle.

Infotainment overview

There are three user accounts and a guest account.

A change to the set personalised functions is auto-

matically stored in the active user account.

Change user account

WARNING

Risk of an accident!

Carry out the account change while the vehicle is

stationary.

▶

A

B

Touchscreen

SD card slot

In the instrument cluster display

Switching to a diﬀerent user account is

›

Control dial left

in the instrument cluster display within

10 seconds after turning on the igni-

tion.

Press: Switch Infotainment on/oﬀ

Turn: Set volume

▶

Control dial right

In Infotainment

Press: Conﬁrm menu item

▶

The system settings are made in the Infotainment

›

Turn: select menu item/set value

▶

in the following menu:

Radio menu

Vehicle status

Media menu

Or:

Overview of Infotainment menus

Phone menu

Vehicle status

The account changes e.g. when changing drivers

while traveling. This avoids unwanted re-setting of

the personalized functions in the active user account.

SmartLink menu

Press: Display menu

▶

Hold: Switch voice control of the SmartLink

application on / oﬀ

▶

Settings

Information about vehicle settings

This function is set in the following menu in the Info-

tainment system:

System

Or:

Limitation

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

Key assignment - Options for assigning the recog-

nised key to the active user account

▶

The Infotainment system indicates this by means of

a message in the screen.

▶

Manual - the key must be manually assigned to

the active account.

Automatic - detected key automatically assigned

▶

Basic settings

to a diﬀerent account of the active account.

Assign the key to the current user account -

Manual assignment of the key to the active ac-

count

▶

Setting basic functions

The following Infotainment functions are set in the

menu

:

To maintain the assignment of the selected user

account to the selected key, we recommend that

you select the manual key assignment.

Time and date

Language

Units

▶

68 Infotainment Swing › Screen

Restore factory settings

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

▶

Sound settings

The Infotainment sound is set in the menu

Determine system version

Sound

.

Tap System information

.

›

The following menu items can be set:

Manual update

Information about available updates can be found on

the ŠKODA website.

Setting the maximum volume when Infotainment is

turned on

Volume adjustment of individual Infotainment

functions

Setting the equalizer

Adjusting the volume ratio

▶

http://go.skoda.eu/updateportal

▶

Depending on the equipment, the following ad-

vanced sound settings can be set

Check for available updates.

Save the update to a USB source.

Insert the USB source into the front USB input.

Tap System information Tap Update software

Select the connected USB device as the update

source.

Go to the update ﬁle and conﬁrm the update.

Conﬁrm any messages and wait for the update

›

Setting the sound system

Setting the sound space optimisation for the driver

Turn on/oﬀ and adjust the subwoofer volume

▶

›

.

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

›

The conﬁguration wizard is automatically displayed

if, after switching on the Infotainment system, there

are at least two menu items that have not been set

or if a new user account has been selected.

process to complete.

Screen

To switch oﬀ the automatic display, when the

conﬁguration wizard is displayed tap Don't show again

›

.

Overview

For manual display tap

Conﬁguration wizard

.

›

Safely disconnect the connected USB device

NOTICE

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows:

Remove safely

Select the desired device.

Disconnect/remove the device.

.

›

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

device.

A

B

Status bar

Bar with the functional surfaces of the displayed

menu

C

Other pages of the menu

Troubleshooting

Infotainment not responding

If the infotainment does not respond, restart it as

follows:

Operation

NOTICE

Hold for longer than 10 s.

Wait for the restart to complete.

Danger of screen damage!

›

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

▶

In principle, operation by touch is identical to the op-

eration of a mobile phone.

System update

We recommend having the system update carried

out by a specialist company.

The following operating modes are speciﬁc to the In-

fotainment system.

Infotainment Swing › Infotainment keyboard 69

Numeric keypad

Settings

The following basic screen functions are set in the

menu

Screen:

Brightness level of the screen

Switch oﬀ the screen

Display the time

▶

Conﬁrmation sounds and animations

Infotainment keyboard

Keypad overview

Keypad example

A

Input line

▶

Delete characters before the cursor

The arrangement of the keyboard characters de-

pends on the set infotainment language.

▶

Tap: delete the last character

Hold: delete all characters

Depending on the context, the following types are

used in infotainment:

B

Keypad functional surfaces

Alphanumeric

Numeric

Keyboard for input

Keyboard for search

▶

Conﬁrm the characters that have been entered

If context-sensitive, alphanumeric characters can

be entered by holding a functional surface with a

digit.

Operation

The Infotainment keypad is used to enter characters,

letters and numbers.

The keypad will be automatically displayed when In-

fotainment prompts for characters.

Find

Keypad example

During the character input, a search for correspond-

ing entries takes place.

A

Input line

The entry to be searched can be entered, including

diacritics.

▶

Delete characters before the cursor

▶

Tap: delete the last character

Hold: delete all characters in sequence

Show list of searched entries

The keypad will only provide characters that match

the stored entries.

▶

To display the searched entries, tap

.

›

B

Keypad functional surfaces

▶

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

Change to lowercase

▶

Switch to the ﬁrst capital letter, followed by

lowercase letters

Tap or repeatedly tap the ﬂag symbol until the

desired language keypad is displayed.

›

▶

/

Switch to the language keypad

Switch to the numeric and character key-

pad

▶

Further character variants

Press and hold the sign with the symbol

Select the desired symbol.

.

›

▶

Show additional keypad languages

Insert a space

Hold: Show additional character variants

Move cursor to the left

Setting up additional keyboard languages

Move cursor to the right

Additional keyboard languages

.

›

Conﬁrm the characters that have been en-

tered

70 Infotainment Swing › Control centre

Analogue and digital radio reception

Control centre

Overview

Display of the control centre

Press the bar at the

top of the screen and

drag down.

›

A Select frequency range

Closing the control centre

Tap on

B Depending on the frequency range

FM: Radio text

DAB: Name of the station group

.

›

Or:

Wait 5 seconds.

›

C Preset buttons for preferred stations

List of available stations

Control Centre

The Infotainment control centre can be used for

quick access to the following functions:

Manual station search

Display information about the station (applies to

DAB)

Settings

Infotainment supports digital radio reception in

DAB and DAB+ formats.

List of available stations

To display, tap

.

›

Played station

Station stored on the presets

A traﬃc radio station is set

DAB signal is not available

The DAB station reception is not stable

A

B

C

Preferred functions

Setting the instrument and key illumination

Setting the personal data protection level

Filtering the stations in the list according to

the programme type.

To ﬁlter the FM stations, the RDS and AF func-

tion must be switched on.

To ﬁlter the DAB stations, the alphabetical

sorting function of the stations must be activa-

ted.

Settings

To display editing mode hold any function surface

of the preferred feature.

›

To add the preferred feature, move the desired

feature from the top of the screen to the function-

al surface at the bottom of the screen.

›

Manual update of the station list

In the FM station list, information about the pro-

gramme type and the type of the regional station

can be displayed.

To close edit mode, tap on

.

›

Radio

Overview

Display menu

Tap on

.

›

Infotainment Swing › Radio 71

Save station to favourites from the list of available

stations

Applies to AM, FM and DAB frequency ranges.

Operation

Select station

Hold the line with the name of the desired station.

Tap the desired preset button.

›

Deleting favourites

In the menu Radio

clear memory

.

›

To delete a station button for preferred stations,

tap the desired station button and conﬁrm the de-

letion.

To delete all station buttons for preferred stations

Tap All and conﬁrm the deletion.

›

Tap or at the top of the screen.

›

Function surfaces

Applies to AM, FM and DAB frequency ranges.

SCAN function

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

The variant for changing stations using the function

surface

in the Radio menu is set as follows:

To start automatic play press

Scan or the right

›

In the menu Radio

Choose the change variant.

Arrow buttons:

.

›

rotary control

To end automatic play press

control

.

or the right rotary

›

Traﬃc reception (TP) for FM stations on/oﬀ

Applies to the FM frequency range.

.

Find stations manually

In the Radio main menu, tap

To search in sequence, tap or next to the dis-

played frequency range scale.

In the menu Radio

Traﬃc program (TP)

.

›

.

›

Switch traﬃc reception for DAB stations on/oﬀ

Applies to the DAB frequency range.

Or:

Hold down the scroll mark on the frequency range

scale and move it to the desired value.

In the Radio menu switch on the menu item

Traﬃc program (TP) switch on

›

In the menu Radio

Advanced settings Tap DAB traﬃc an-

›

nouncements switch on / oﬀ

Or:

Assign station logo from an external source

Applies to AM, FM and DAB frequency ranges.

Turn the right rotary control

.

›

Infotainment oﬀers the option to assign logos from

the pictures on an external source to the station but-

tons.

Limitation

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Parking garages, tunnels, tall buildings or moun-

tains can restrict radio reception.

In the rear side windows, there are antennas for re-

ceiving the radio signal.

▶

For station logos, images in jpg, png format with a

maximum resolution of 400x240 pixels can be used.

In the menu Radio

Tap the desired preset button.

Select the external source with the logo.

Find the desired logo and conﬁrm.

Station logos

.

›

Covering the windows with foils or metal-coated

stickers can impair the reception of the radio sig-

nal.

Delete station logos

Applies to AM, FM and DAB frequency ranges.

The ŠKODA AUTO company does not assume any

responsibility for the availability, correct function

or broadcast information of the RDS service.

▶

In the menu Radio

To delete a logo, tap the desired preset button and

conﬁrm the deletion.

Station logos

.

›

To delete all logos Tap All and conﬁrm the deletion.

›

Settings

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

Save the station currently being listened to as a fa-

vourite from the Radio main menu

When the function is switched on and station pre-

sets are displayed, detailed information about the

broadcast content of the FM station being listened

Hold the desired station key for preferred stations

›

until the station is stored.

72 Infotainment Swing › Media

to, or the name of the station group for the DAB sta-

tion, is displayed.

Enable/disable automatic programme tracking of a

DAB station

Applies to the DAB frequency range.

In the menu Radio

Radio text

.

›

When the function is switched on and the DAB sta-

tion is lost, Infotainment automatically changes to

the same station with a better signal in a diﬀerent

DAB station group.

Switch automatic frequency control (AF) on/oﬀ

Applies to the FM frequency range.

When the function is switched on and the signal of

the FM station currently being listened to is weak,

Infotainment automatically sets the same station to

a diﬀerent frequency with a better signal.

In the menu Radio

Advanced settings DAB - DAB program

›

tracking

.

Turn on/oﬀ automatic switching from a DAB sta-

tion to the same FM station

Applies to the DAB frequency range.

In the menu Radio

Advanced settings Automatic frequen-

›

cy change (AF)

.

Sort stations in the list of available stations

Applies to the FM frequency range.

When the function is switched on and the DAB sta-

tion being listened to is lost, Infotainment automati-

cally changes to the same FM station. The symbol

(FM) is displayed after the station name.

In the menu Radio

Select the sorting of stations in alphabetical order

or by group.

Advanced settings Station list:

.

›

When the corresponding DAB station can be re-

ceived again, the station automatically changes from

FM to DAB.

Automatic change of frequency to a regionally

linked FM station

Applies to the FM frequency range.

In the menu Radio

Advanced settings Tap Automatic

›

change DAB - FM

.

Infotainment provides the option of automatically

switching to a regionally linked FM station in case of

signal loss of the FM station being listened to.

Switch the slideshow function on/oﬀ

Applies to the DAB frequency range.

In the menu Radio

Select one of the following menu items:

Advanced settings RDS Regional:

.

›

▶

When the function is switched on, the images broad-

cast by the station are displayed in the player.

Fix - When the signal is lost, another station must

be set manually.

In the menu Radio

Advanced settings DAB slideshow

.

›

Automatic - automatic selection of the station with

the best signal reception.

▶

Media

If reception is lost in the given region, Infotain-

ment will automatically set another available region.

What you should be mindful of

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

Switch RDS on/oﬀ

Applies to the FM frequency range.

The menu item is only available for some countries.

In the menu Radio

Advanced settings Radio Radio Data

›

System (RDS)

.

If the RDS function is disabled, the following menu

items in FM station settings are not available:

Traﬃc program (TP)

Radio text

RDS Regional

▶

Automatic frequency change (AF)

Switching additional announcements of the DAB

transmitter on / oﬀ

Applies to the DAB frequency range.

Overview

When the function is switched on, other announce-

ments are received as traﬃc announcements. These

include e.g. weather news, sports reports, ﬁnancial

news etc.

Display menu

Tap

.

›

In the menu Radio

Advanced settings Tap other DAB an-

›

nouncements

.

Infotainment Swing › Media 73

Settings

Turn title playback including subfolders on/oﬀ

In the Media menu tap on

Mix/Repeat including subfold-

›

ers.

.

Traﬃc

To turn on/oﬀ traﬃc monitoring during playback

of media ﬁles, go to the Media in the main menu

›

and tap on Traﬃc program (TP)

.

Safely disconnect the connected device

A Select source

NOTICE

Manage ﬁles / multimedia database

Settings

Risk of damage to the data on the connected device!

To safely disconnect/remove the device, proceed as

follows:

In the Media menu tap on

Select the desired device.

Disconnect/remove the device.

Remove safely:

.

›

Operation

Operation - Basics

If it is not possible to safely disconnect the de-

vice, switch oﬀ the Infotainment and disconnect the

device.

Bluetooth® player

Infotainment allows audio ﬁles of a connected Blue-

tooth® player to play using the A2DP and AVRCP au-

dio proﬁle.

With Infotainment, multiple devices can be paired

using Bluetooth®, but only one of them can be used

as a Bluetooth® player.

A Album image / symbol of the connected source

Tap: display available albums

For connecting the Bluetooth® player, pair and

connect the device via Bluetooth®.

›

Tap: start playback

Tap: pause

In the Media menu tap on

In the list, choose the device with the symbol

Bluetooth Paired devices

.

›

.

Within 3 seconds of starting playback, tap: play

the previous song

If a device is connected to Infotainment using

Apple CarPlay or Android Auto, then it cannot be

connected using Bluetooth®.

After 3 seconds from the start of playback, tap

to play the current title from the beginning

SD card

Hold: fast rewind within the title

Tap: play the next song

NOTICE

Risk of damaging the SD card reader!

Hold: fast forward within the title

Do not use SD cards with a broken slide for write

protection.

▶

Movement within the title is also possible by drag-

ging the ﬁnger over the timeline.

To insert the SD card, with the bevelled corner to

the right, push into the slot in the external module

until it snaps into place.

›

Extended operation

Turn repeat playback of the current track on/oﬀ

Turn repeat playback of the current album/fold-

er on/oﬀ

Turn random playback of the current album/

folder on/oﬀ

To remove, ﬁrst disconnect the SD card safely. For

›

this in the menu media

tap on Remove safely: and

select the SD card.

Press on the inserted SD memory card.

The SD card moves to the eject position.

NOTICE

Restriction

When using an SD card with an adapter, vehicle vi-

brations might cause the card to fall out of the

adapter.

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

74 Infotainment Swing › Media

USB device

Load USB audio source

After connecting the USB device, charging will start

automatically when the following conditions are met:

To connect, insert the USB device into the appro-

priate port.

›

To play audio ﬁles, use USB ports that support data

transfer.

✓ The ignition is switched on.

✓ The USB device allows charging.

To disconnect disconnect the USB device ﬁrst. For

this in the menu media

›

The charging eﬃciency can be diﬀerent compared to

the charging from the usual mains power supply.

tap on Remove safely: and

select the USB device.

Depending on the type of the connected USB device

and the frequency of use, the charging current may

not be suﬃcient to charge the battery of the con-

nected device.

Disconnect the USB device.

›

A USB device can be connected directly to the

USB port or via a connection cable.

We recommend using connection cables from the

ŠKODA Original Accessories range.

USB extension cables or reducers may aﬀect the

playback function of the connected device.

Some connected audio sources may not be recog-

nised and cannot be charged.

Supported sources and ﬁles

Supported sources

Source

Interface

Type

Speciﬁcation

File system

SD

SDHC

SD card

SD card reader

Standard size

SDXC

USB stick

HDD

(without special soft-

ware)

USB devices that sup-

port the USB Mass Stor-

age protocol

MSC

FAT16

FAT32

exFAT

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

Devices running the An-

droid or Windows Phone

operating system that

support the Media

Transfer Protocol

Devices with an iOS op-

erating system

Bluetooth® protocols

A2DP and AVRCP (1.0 -

1.5)

MTP

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

The GPT standards (GUID partition table) method structured audio sources are not supported by Infotain-

ment.

Viewing images on the Infotainment screen is not supported by connected Apple devices.

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code:

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

Infotainment Swing › Mobile device management 75

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio ﬁles

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

Mono, Dual Mono,

Stereo, Joint

Stereo

Mono,

Stereo, Joint

Stereo

MPEG 1 Layer 3

mp3

32 - 320

8 - 160

32, 44, 48

MPEG

WMA

MPEG 2 Layer 3

16, 22, 24

8, 11, 12

MPEG 2.5 Layer 3

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

Windows Media

Audio 10

8 - 384

8 - 320

8 - 384

8, 11, 12, 16,

22, 32, 44,

48

Mono, Stereo,

Joint Stereo

wma

32, 44, 48,

96

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported playlists

Codec type

File extension

M3U

PLS

m3u

pls

WPL

ASX

wpl

asx

Mobile device management

Overview

Mobile device management

In the Telephone

menu Bluetooth Paired devices

.

›

In the list of paired mobile devices, the following symbols may appear for the individual devices:

White icon - the device can be connected as a telephone.

Green icon - the device is connected as a telephone.

White icon - the device can be connected as a Bluetooth® player.

Green icon - the device is connected as a Bluetooth® player.

Possible functions of the connected mobile device

The functions of a device connected via over the HFP Bluetooth proﬁle depends on the following connection

types.

First device

Main phone

Second device

Additional phone

incoming / outgoing calls

Telephone contacts

Bluetooth® player

With Infotainment only a mobile device can be connected as a Bluetooth® player.

76 Infotainment Swing › Mobile device management

Information about ŠKODAapplications

Detailed information about ŠKODA applications can

be found on the website after reading the following

QR code or link:

Limitations of mobile devices and applications

Availability of features

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

http://go.skoda.eu/mobile-apps

Connection restrictions

With Infotainment, a max. of 20 mobile devices are

paired.

▶

The range of the connection of the mobile device

to Infotainment is limited to the passenger com-

partment.

▶

Connection set-up

After reaching the maximum number, the pairing

of the next mobile device will replace that of the

device that has not been used for the longest peri-

od of time.

▶

Connect a mobile device to Infotainment

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

The infotainment Bluetooth®

›

Bluetooth Blue-

›

Compatibility of mobile devices

tooth switch on

It is possible to check the ŠKODAweb pages to see if

Infotainment is compatible with the selected mobile

device being tested. This check is carried out by us-

ing the following reference or by reading the QR

code:

Bluetooth® visibility of the infotainment

Blue-

tooth Visibility: Visible switch on

Find available Bluetooth® devices in the mobile de-

vice.

Select the Infotainment Bluetooth® unit.

http://go.skoda.eu/compatibility

The name of the unit can be found by tapping on

Bluetooth Name:

.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

The mobile device is connected to the Infotainment

or just paired, depending on the number of devices

that are already connected.

All information given is incidental and serves as in-

formation.

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

Connect Infotainment to a non-paired mobile de-

vice

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

The infotainment Bluetooth®

tooth switch on

›

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

›

Bluetooth Blue-

›

Bluetooth Search devices

Ensure the visibility of the device to be connected.

Select the desired device from the list of Blue-

tooth® devices.

.

›

Applications in mobile devices

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

Due to the variety of applications, as well as their on-

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Connect Infotainment to a mobile device that is al-

ready paired

The connection with an already paired mobile device

is made automatically after switching on the ignition;

if necessary the device can be connected manually

as follows:

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Turn on the ignition.

Turn on the Bluetooth® on the mobile device.

The infotainment Bluetooth®

tooth switch on

›

Bluetooth Blue-

›

Infotainment Swing › Telephone 77

Bluetooth Paired devices

In the device list, select the desired device and the

Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

.

›

Conditions for connecting a telephone with

Infotainment

✓ The ignition is switched on.

✓ The Bluetooth® function of the Infotainment and

›

conﬁrm.

the telephone needs to be switched on.

If two devices are connected to the Infotainment,

select the device to be replaced.

The Bluetooth® function of the Infotainment is

switched on in the menu item

Bluetooth Blue-

Disconnect from a mobile device

Bluetooth Paired devices

Tap on the Bluetooth® proﬁle icon of the desired

tooth

.

›

✓ Visibility of the Infotainment is switched on.

The visibility of the Infotainment is switched on in

mobile device.

the menu item

Bluetooth Visibility: Visible.

Delete a paired mobile device

Bluetooth Paired devices

To delete a mobile device, tap and conﬁrm the

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

.

›

deletion.

✓ No mobile device is connected to the Infotain-

To delete all mobile devices, tap Clear all and conﬁrm

the deletion.

›

ment using Apple CarPlay®.

Telephone operation

Enter telephone number

Telephone

Phone menu

Display menu

In the Phone menu, tap on

Enter the telephone number using the numeric

keypad that is displayed.

.

›

Tap on

.

›

The displayed numeric keypad can also be used

for searching for contacts.

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

If the menu phone is not displayed, check wheth-

er the mobile device is connected.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

To display the contact list in the phone menu, tap

›

on

.

To search within the list, tap on Find

Enter the details you wish to ﬁnd.

.

›

A Name of the connected telephone

To establish a connection with a contact, tap the

functional area showing the desired contact.

Tap: Show list of previously connected phones

▶

B Preset buttons for preferred contacts

If a contact has multiple telephone numbers, select

the telephone number from the displayed list.

C Choice of storage group for the preferred con-

tacts

To display the details for a contact, tap

.

›

D Name of telephone service providers

Telephone conversation

Depending on the context of the telephone conver-

sation, the following functions can be selected:

▶

If the symbol is displayed in front of the name,

roaming is active.

Enter telephone number

Contact list

End connection / reject incoming call / end call

Answer an incoming call / return to the held call

Call lists

Switch the ringer oﬀ / on

/

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

Switch on voice control for the connected tele-

phone

/

Settings

78 Infotainment Swing › SmartLink

To switch the call tone from the speakers to the

telephone, go to telephone in the menu and tap on

›

SmartLink

Functionality

speakerphone

.

To switch the call tone from the telephone to the

›

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

speakers, tap

.

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

Settings for Infotainment telephone functions

Manage preset buttons for preferred contacts

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

To save the desired preset button, press and hold.

Select a contact from the displayed list.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

›

Mobile devices can be connected via a USB cable.

›

Supported connection types

SmartLink supports the following connection types:

To Clear in the telephone menu tap

User proﬁle

›

Android Auto

Apple CarPlay

MirrorLink

▶

Manage favourites

.

To delete one preset, tap on the list entry and con-

ﬁrm the deletion.

Or:

To delete all station buttons, tap Clear all and conﬁrm

the deletion.

Overview of the SmartLink connection

Menu SmartLink

›

Import telephone contacts

Tap on

.

›

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

Infotainment can import up to 2000 telephone con-

tacts. Each contact can include max. 5 telephone

numbers.

Depending on the type of telephone, import conﬁr-

mation may be required.

Update telephone contacts

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

A Previously connected device

B Currently connection device

For manual update of the list in the phone

›

Display information about SmartLink

Disconnection of the active connection

Settings in SmartLink menu

menu User proﬁle tap on Import contacts

.

Sort contacts in the phone book

In the Telephone

Select the type by which to sort.

menu User proﬁle Sort by:

.

›

Ringtone

Android Auto

Some phones do not allow the use of the telephone

ringtone; instead, the Infotainment ringtone is used.

For setting the Infotainment ringtone in the

›

phone

menu User proﬁle select the ringtone

.

Select the ringtone.

›

Simultaneous calls

This applies to some countries.

Depending on the connected telephone, it is possible

to answer the next incoming call and hold the previ-

ous call.

Overview of running applications, phone calls, in-

coming text messages, and more.

To switch on/oﬀ simultaneous calls, tap on tele-

›

phone

Simultaneous calls

.

Turn on voice control (Google Voice)

Infotainment Swing › SmartLink 79

Apple CarPlay

✓ Some applications require the data connection in

the mobile device to be turned on.

✓ Connect the mobile device for the ﬁrst time

when the vehicle is stationary.

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlay connection.

A list of devices, supported regions and applica-

tions that support the Apple CarPlay connection

can be found on the Apple Inc website.

✓ Siri voice control is on.

✓ The data connection in the mobile device is

A

B

List of available applications

Depending on the duration of operation:

switched on.

Tap: Return to the menu Apple CarPlay

Hold: Turn on voice control (Siri)

▶

Conditions for MirrorLink

✓ The device to be connected must have MirrorLink

connection.

▶

MirrorLink

A list of devices and applications that support the

MirrorLink connection can be found on the web-

sites of Car Connectivity Consorcium®.

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

the connected mobile device to be turned on.

Operation

It is not possible to operate the application while

driving

Operation of the running MirrorLink application

Move the functional areas to the left edge of

the screen

Return to the menu SmartLink

List of running applications

Move the functional areas to the right edge of

the screen

Move the functional areas to the top of the

screen

Display of the last running application in connec-

ted mobile devices

Settings

Move the functional areas to the bottom of

the screen

Connection conditions

Return to the menu MirrorLink

General connection conditions

✓ The mobile device supports the type of Smar-

tLink connection Android Auto, Apple CarPlay or

MirrorLink.

✓ Mobile devices, as well as the type of SmartLink

connection, are supported in the respective mar-

ket.

Restriction

Restriction of SmartLink applications while driving

For reasons of safety, the operation of some Smar-

tLink applications while driving is not possible or only

limited.

✓ Some connected mobile devices require the mo-

Functionality restriction of Infotainment with an

Android Auto connection

bile device to be “unlocked”.

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Conditions for Android Auto

✓ The device to be connected must have Android

Auto connection.

▶

A list of devices, supported regions and applica-

tions that support the Android Auto connection

can be found on the Google, Inc. website.

✓ The Android Auto application needs to be instal-

led on the mobile device.

80 Infotainment Swing › SmartLink

For the duration of the connection, no other Blue-

tooth® devices can be connected to the Infotain-

ment system.

Choose to connect through MirrorLink.

▶

›

MirrorLink - Disconnect

In the MirrorLink menu, tap on

.

›

Functionality restriction of Infotainment with an

Apple CarPlay connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

Tap on

.

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

▶

Connecting the device disconnects all currently

connected Bluetooth® devices.

For the duration of the connection, no Bluetooth®

devices can be connected to the Infotainment sys-

tem.

Tap on

.

▶

›

Select the desired device or connection type.

Functionality restriction of Infotainment with an

MirrorLink connection

For the duration of the connection, the external de-

vice cannot be used as an audio source in the Me-

dia menu.

▶

By connecting the device, all currently connected

Bluetooth® devices will be disconnected and the

device will automatically be connected as the main

telephone.

▶

Depending on the device to be connected, a con-

nection conﬁrmation may be required.

Settings

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Apple CarPlay.

›

Apple CarPlay - Disconnect

In the Apple CarPlay menu, tap on the function

area “ŠKODA”.

›

Tap on

.

›

Android Auto - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Choose to connect via Android Auto.

›

Android Auto - Disconnect

In the Android Auto

DA”.

menu, tap “Return to SKO-

›

Tap on

.

›

MirrorLink - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Infotainment Swing for Your Skoda Superb SUV Fourth Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals