2024-2026 Skoda Superb SUV Keys, locks and alarm system -> Keyless locking (KESSY) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Keys, locks and alarm system -> Keyless locking (KESSY) for Your Skoda Superb SUV Fourth Generation (2024-2026)

26 Keys, locks and alarm system › Keyless locking (KESSY)  
Locking and unlocking  
Release  
Insert the removed key  
Grab the door handle.  
Open the door.  
bit with the handle fac-  
ing downwards into  
the lock cylinder and  
unlock or lock it.  
Install cover  
Pull on the door handle  
and hold it.  
Replace the cover.  
Release the door handle.  
Lock  
Locking the door without the lock cylinder  
Touch the sensor.  
After locking, it is not  
possible to unlock  
within 2 seconds by  
touching the door han-  
dle. This can be used to  
check whether the ve-  
hicle is locked.  
Unlocking the boot lid  
Open the door.  
For vehicles with a panel over the opening, remove  
the panel.  
Insert the key or a flat-head screwdriver into the  
slot.  
Turn the key or flat-head screwdriver towards the  
outside of the vehicle (spring-loaded position).  
Press the handle of the boot lid.  
Protection against inadvertently locking the key in  
the vehicle  
If the key is locked inside the vehicle, the vehicle will  
unlock itself automatically. If no door is opened with-  
in 45 seconds, the vehicle automatically locks again.  
If the key is locked in the boot, the boot lid will auto-  
matically unlock itself.  
After closing, the door is locked.  
Keyless locking (KESSY)  
Usage  
Settings  
Deactivate keyless locking  
Lock the vehicle with the button on the key.  
Within 5 s, touch the sensor on the door handle  
with your finger.  
The keyless locking system, KESSY, enables unlock-  
ing and locking of the vehicle without actively using  
the remote control key.  
Deactivation is confirmed by a single flash of the  
direction indicators.  
To check the deactivation, wait at least 10 seconds  
and then pull the door handle.  
Operation  
Keep the key with you when unlocking and locking.  
The door must remain locked.  
The sensors on the handle are intended to be operat-  
ed with bare hands, e.g. wearing gloves may affect  
the function of the sensors.  
Keyless locking is automatically activated once again  
after the vehicle is unlocked.  
Troubleshooting  
The vehicle cannot be unlocked or locked using  
the sensors on the handle  
Lock or unlock the vehicle with the button on the  
key.  
Keys, locks and alarm system › Alarm system 27  
Then try to unlock or lock the vehicle using the  
sensors on the handle.  
If keyless locking does not work, seek the help of a  
specialist garage.  
If the electrical connection to the trailer is interrup-  
ted on a vehicle with an activated alarm system,  
warning signals are triggered.  
Disable the alarm before connecting or discon-  
necting a trailer.  
If the vehicle is not unlocked for a longer period  
of time, the function can be deactivated automati-  
cally.  
Settings  
When the ignition was switched on, no key was  
The following functions of the alarm system can be  
deactivated at the same time:  
found  
illuminates  
Message that no key was found in the vehicle  
Interior monitoring  
Towing protection  
Insert the key into the vehicle.  
Deactivation will also switch off the SAFE func-  
tion » page 24, Functionality.  
Alarm system  
Functionality  
Deactivation  
By double locking within 2 seconds.  
Or:  
The alarm system triggers audible and visual signals  
during a break-in or towing attempt.  
In infotainment in the menu  
item for interior monitoring  
Menu  
The alarm system is activated automatically approxi-  
mately 30 seconds after the vehicle is locked.  
Or:  
The alarm system is automatically deactivated after  
the vehicle is unlocked.  
In infotainment in the menu  
Menu item for interior monitoring  
Alarm triggering  
The activated alarm system triggers an alarm when  
one of the following events occurs:  
The deactivated functions are reactivated after the  
vehicle is unlocked and locked again.  
Deactivation is to be carried out if the vehicle is,  
for example, towed or transported.  
Opening the bonnet  
Opening the boot lid  
Opening the door  
Manipulation of the ignition lock  
Towing the vehicle  
Movement in the vehicle  
Sudden and significant voltage drop of the electri-  
cal system  
Uncoupling the trailer  
Opening the door unlocked via the lock cylinder  
Switching off the triggered alarm  
Unlock the vehicle.  
Or:  
Turn on the ignition.  
Operating conditions  
For the correct functioning of the alarm system, all  
windows must be closed.  
A trailer is integrated into the alarm system under  
the following conditions:  
The vehicle is factory-fitted with a towing device.  
The trailer is electrically connected to the vehicle  
via the trailer socket.  
The trailer is not equipped with LED taillights.  

Related Topics

Popular Owner Manuals