2024-2026 Skoda Superb SUV Starting and driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving for Your Skoda Superb SUV Fourth Generation (2024-2026)

Starting and driving › Start 165  
Requirements  
Starting and driving  
The service and the coupled functions are available  
depending on the following conditions:  
Start  
Notes on starting  
The vehicle type, vehicle equipment and Infotain-  
ment type are supported.  
The set protection level for personal data that en-  
ables the required data to be sent.  
The ŠKODA Connect services are active.  
The ŠKODA Connect services are available.  
DANGER  
Danger of poisoning by exhaust gases!  
Do not run the engine in an enclosed space.  
Operating conditions  
The vehicle key is located in the vehicle interior.  
NOTICE  
Risk of key loss, possibly of key damage!  
The system can detect the key even if it has been  
forgotten on the vehicle roof.  
Always keep the key with you.  
Switching the ignition on and off  
Press the starter button.  
Starting the vehicle with manual transmission  
Secure the vehicle with the parking brake.  
Move the shift lever to the neutral position.  
Keep the clutch pedal depressed.  
Press the starter button.  
Starting the vehicle with automatic transmission  
Secure the vehicle with the parking brake.  
Keep the brake pedal depressed.  
Move the selector lever to position or  
Press the starter button.  
.
In vehicles with diesel engines, the warning light  
lights up after the ignition is switched  
system on. The engine starts after  
- glow plug  
.
CAUTION  
Danger of unexpected vehicle movement!  
At temperatures below -10°C, start the vehicle  
with the selector lever in the position.  
Stopping the engine  
Secure the vehicle with the parking brake.  
Press the starter button.  
WARNING  
Steering lock hazard!  
During a journey with the engine stopped, the igni-  
tion must always be switched on.  
NOTICE  
Risk of engine overheating!  
Do not switch the engine off immediately at the  
end of your journey after the engine has been run-  
ning at high loads. Leave it to run at an idling speed  
for about 1 minute.  
166 Starting and driving › Starting issues  
Functionality  
Starting issues  
Troubleshooting  
If the system determine that the engine is not nee-  
ded when the vehicle stops, it turns off the engine  
and starts it again when moving off.  
NOTICE  
Danger of engine damage!  
Vehicle with manual transmission  
Do not start the vehicle by towing.  
A system-related engine switch-off occurs when  
stopping, when switching the gear lever into the  
neutral position, and when releasing the clutch pedal.  
The engine does not start  
Switch off the ignition.  
Wait 30 seconds and repeat the starting proce-  
dure.  
A system-related engine start occurs when the  
clutch pedal is pressed down.  
If the engine does not start, use the jump start ca-  
Vehicle with automatic transmission  
A system-related engine switch-off occurs when the  
brake pedal is actuated and the engine is stopped.  
bles with the 12 volt vehicle battery of another ve-  
hicle » page 203 or seek the help of a specialist ga-  
rage.  
A system-related engine start occurs when the ac-  
celerator pedal is pressed down. When the Auto  
Hold function is deactivated, a system-related en-  
gine start occurs after releasing the brake pedal.  
The engine does not start, the display shows a  
message regarding the immobilizer  
Use the other vehicle key.  
If the engine does not start, seek the help of a spe-  
cialist garage.  
Status display in the instrument cluster display  
- Engine is switched off via the START-STOPP  
system  
Starting is not possible with the starter button, the  
system did not detect the key  
illuminates  
- Engine is not switched off via the START-  
STOPP system due to operating conditions  
that are not met  
Press the starter but-  
ton with the key.  
Display of detailed information in the infotainment  
screen  
If the engine does not  
start, seek the help of a  
specialist garage.  
Vehicle status  
Or:  
Vehicle status  
Operating conditions  
Some conditions are systemic and can neither be in-  
fluenced nor recognised. Therefore, the system may  
react differently in situations which seem identical  
from the driver's perspective.  
The key might not be detected if the battery in  
the key is nearly discharged or the signal is faulty.  
The engine cannot be turned off with the starter  
button  
The driver must fulfil the following conditions.  
Hold the starter button or press twice.  
The driver's door is closed.  
The driver has fastened the seat belt.  
The driving speed was higher than 4 km/h after  
The radiator fan keeps running even after the en-  
gine has stopped  
The radiator fan can continue to run for approxi-  
mately 10 minutes after the engine is stopped. This  
is not a defect.  
the last stop.  
The engine makes noises after the cold start  
The increased running noise is due to the briefly in-  
creased engine speed. This is not a defect.  
Settings  
Automatic activation  
Upon start-up of the engine.  
By selecting the driving mode Eco » page 169, Op-  
eration.  
START STOP  
Usage  
Deactivate/activate system  
Press the button.  
The START-STOPP system reduces polluting emis-  
sions and the CO2emissions and saves fuel.  
Starting and driving › Manual gearbox 167  
When the system is deactivated, the symbol illumi-  
nates in the button  
In mode, the gear is changed at higher speeds  
than in mode.  
.
Choose between and (spring-loaded posi-  
tion)  
If a system-related engine switch-off occurs and the  
system is deactivated, the engine will start.  
Moving the selector lever out of the or position  
lights up - the selector lever is locked  
Troubleshooting  
The engine does not switch off when stopping, or  
it starts before starting up  
The system has detected that the engine is running.  
Press the brake pedal,  
and at the same time,  
press the button in the  
selector lever.  
Manual gearbox  
Operation  
NOTICE  
Danger of engine damage!  
Shift into higher gear before reaching the red area  
of the rev counter scale.  
WARNING  
Risk of the stationary vehicle rolling away automati-  
cally!  
When the selector lever is in the  
sition or in manual shift mode, secure the vehicle  
with the brake.  
NOTICE  
Danger of gearbox damage!  
Depress the clutch pedal all the way down.  
If not in the process of changing gear, do not leave  
your hand on the gearshift lever.  
position, po-  
Operation  
Starting up  
Engaging reverse gear  
Stop the vehicle.  
Depress the clutch pedal completely.  
Move the shift lever to the neutral position.  
Push the gearshift lever down.  
Set this completely to the left.  
Wait briefly.  
Keep the brake pedal depressed.  
Start the engine.  
Press the button in the selector lever and set it to  
the desired position.  
Release the brake pedal and press the accelerator  
pedal lightly.  
Engage reverse gear.  
Speeding up while driving (kick-down)  
Fully depress the accelerator.  
Automatic gearbox  
Lever positions  
Parked vehicle  
Stopping temporarily (e.g. at a junction)  
Leave the selector lever in the  
cure the vehicle with the brake pedal.  
position and se-  
The drive wheels are  
locked.  
Stopping  
Keep the brake pedal depressed.  
Secure the vehicle with the parking brake.  
Press the button in the selector lever and set it to  
the position.  
Only set the posi-  
tion when the vehi-  
cle is stationary.  
Reverse gear  
Only set the posi-  
tion when the vehi-  
cle is stationary.  
Turn off the engine.  
Driving in neutral  
If the system detects that no gear is engaged while  
driving, it automatically switches to neutral position.  
Neutral  
will be displayed in the instrument cluster.  
There is no transmission of engine power to the  
wheels.  
Forward drive / sports program  
Requirements for driving in neutral position  
mode is chosen.  
Neither the accelerator nor the brake pedal is  
The gear is changed automatically.  
pressed.  
168 Starting and driving › Automatic gearbox  
The vehicle speed is 20-130 km/h.  
Troubleshooting  
There is no device connected to the trailer sock-  
The selector lever cannot be moved out of posi-  
tion in the normal way  
et.  
Acceleration on start-up (launch control)  
This function allows maximum acceleration during  
start-up.  
Manually unlock the selector lever » page 168.  
Gearbox overheated  
illuminates together with  
Select mode or manual shift mode.  
Disable the TCS » page 176.  
Keep the brake pedal depressed.  
Fully depress the accelerator.  
or  
illuminates together with  
Message regarding the gearbox overheating  
Release the brake pedal.  
You may continue driving, exercising appropriate  
caution.  
The vehicle drives with maximum acceleration.  
Manually switching gear with the selector lever  
illuminates together with  
To turn on, put the selector lever in the  
posi-  
tion to the right (to the left for right-hand drive ve-  
hicles).  
or  
illuminates together with  
Message regarding the gearbox overheating  
To turn off, put the selector lever back in the  
position.  
Stop driving! Stop the vehicle and stop the engine.  
After the indicator light goes out, your journey can  
continue.  
If the warning light does not go out, stop driving!  
Seek the help of a specialist garage.  
Changing up a gear  
+
-
Changing down a  
gear  
Gearbox impaired  
illuminates together with  
or  
Manually changing gear with the shift paddles on  
the steering wheel  
illuminates together with  
Message regarding the gearbox in emergency  
mode  
Changing down a  
gear  
-
You may continue driving, exercising appropriate  
caution.  
Changing up a gear  
+
Immediately seek the help of a specialist garage.  
To switch on the shift  
illuminates together with  
+
paddle, press - or  
.
To turn off the shift  
or  
+
paddle, hold  
.
illuminates together with  
Message regarding a gearbox fault  
If none of the shift pad-  
dles are pressed for a  
Stop driving! Seek the help of a specialist garage.  
certain time, manual shift mode turns off automati-  
cally.  
Starting up a vehicle that is stuck  
If the engine threatens to over-rev  
Adjust the selector lever between  
and . The  
The gearbox automatically changes to the next  
higher gear.  
vehicle will then start to rock and be easier to free.  
The transmission prevents changing to the next  
lower gear.  
Manual release of automatic gearbox  
Secure the vehicle with the parking brake.  
Open the stowage compartment in the front cen-  
tre console.  
Starting and driving › Vehicle driving mode 169  
Offroad mode  
Insert a flat-head  
screwdriver or push a  
similar tool into the  
gap in the area of ar-  
row A .  
Offroad mode is suitable for driving on non-paved  
roads. But even with Offroad mode switched on,  
your vehicle is never a true SUV.  
The following brake and stabilisation systems  
change in Offroad mode.  
Carefully loosen and  
lift the quadrant cover.  
ESC.  
ASR.  
EDL.  
ABS.  
Press on the plastic  
part in the direction of  
the arrow and at the  
same time press the  
button on the selector  
lever.  
When switched on Offroad mode lights up  
and  
in the instrument cluster.  
Operation  
Put the selector lever  
in position.  
Select driving mode  
Press the  
button.  
In the Infotainment, a driving mode menu appears.  
Vehicle driving mode  
Usage  
The driving mode offers the possibility of adapting  
the driving behaviour to the desired driving style.  
Overview  
Information about the selected driving mode is dis-  
played in the status bar in the Infotainment screen as  
well as in the digital instrument cluster.  
A
Information on the system settings of the cur-  
rently selected mode/system settings for the se-  
lected Individual mode  
B
Driving mode menu  
Eco mode  
Eco mode is suitable for a relaxed style of driving and  
helps to save fuel.  
Tap the relevant function surface B .  
Or:  
Comfort mode  
Press the  
button again.  
After switching on the ignition, Normal mode is  
automatically selected.  
Comfort mode is suitable for driving on roads with  
poorer surface or for long motorway journeys.  
Normal mode  
Troubleshooting  
The Normal mode is suitable for a conventional driv-  
ing.  
Adaptive DCC suspension faulty  
illuminates together with  
Sport mode  
or  
The Sport mode is suitable for a sporty driving.  
illuminates together with  
Individual mode  
Drive on, exercising appropriate caution. Seek  
The Individual mode allows the individual configura-  
tion of certain vehicle systems.  
the help of a specialist garage.  
170 Starting and driving › Economical driving style  
Tapping the screen near the value E displays the  
average fuel consumption during the last 30 mi-  
nutes of driving.  
Economical driving style  
Tips for economical driving and evaluation of  
driving economy  
F
Information about the current driving  
Tips for economical driving  
Economical driving style  
Avoid unnecessary acceleration and braking.  
Follow the gear recommendation in the display of  
the instrument cluster.  
Avoid full acceleration and too high speeds.  
Avoid engine idling during longer periods of sta-  
tionary time.  
The speed has a negative effect on fuel con-  
sumption  
The ride is not steady  
Recommended gear  
In Infotainment it is possible to display up to  
three consumers that are currently making up the  
Do not warm up the engine while the vehicle is sta-  
tionary. If possible, start your journey as soon as  
the engine starts.  
Observe the prescribed tyre pressure » page 211.  
Remove unnecessary ballast.  
Remove the roof rack when it is not needed.  
Switch on electric consumers only for as long as  
necessary.  
largest share of fuel consumption.  
Convenience consumers  
Or:  
Convenience consumers  
Consumption-friendly driving  
In the following situations, a small reduction in fuel  
consumption occurs.  
cluster.  
lights up in the instrument  
Do not leave the windows open while driving.  
Active cylinder management has temporarily disa-  
bled some cylinders in the engine (applies to cer-  
tain engine types).  
A vehicle with automatic transmission rolls in neu-  
tral position.  
Display of evaluation in the infotainment screen  
DriveGreen  
Or:  
DriveGreen  
Towing a trailer  
What you should be mindful of  
WARNING  
When driving with a trailer, special care is required!  
NOTICE  
With frequent towing, the vehicle is excessively loa-  
ded so this must also be checked between service  
intervals.  
A
B
Display of steady driving  
When driving steadily, the display is located near  
the green dot.  
Recommendations for using a trailer  
Adjust the tyre pressure on the vehicle for full load.  
Leaf  
Do not exceed the maximum permissible total  
weight of the vehicle and the combination weight  
specified in the technical vehicle documentation  
(e.g. in the vehicle registration documentation, in  
the COC document) and on the type plate.  
The greener the leaf, the more economic the  
driving style. Tapping the screen near the leaf  
displays tips for reducing fuel consumption and  
energy consumption.  
C
D
Driving efficiency chart  
For trailer operation, consider the current load con-  
dition of the vehicle as well as the distribution of  
the load in the trailer. The coupled trailer increases  
the rear axle load and can therefore reduce the  
payload.  
Adjust the headlight range of the headlights ac-  
cording to the load status of the vehicle. The front  
of the vehicle may lift up when a trailer is being  
towed and the headlights may dazzle other road  
users.  
Each bar indicates driving efficiency in 5 second  
increments. The current bar is on the left. The  
higher the green bars, the more economical the  
driving style.  
Point value (0-100)  
The higher the indicated value, the more eco-  
nomical the driving style. Tapping the screen  
near the value D displays a rating for the last 30  
minutes of driving.  
A speed of 100 km/h should not be exceeded.  
E
Average fuel consumption  
Starting and driving › Towing a trailer 171  
Reduce the speed by releasing the accelerator  
pedal as soon as a pendulum movement of the  
trailer is noticeable. Never attempt to stop the  
trailer from swaying by accelerating.  
If the traffic area behind the trailer can not be  
viewed, install additional exterior mirrors.  
Apply the brakes in good time. If the trailer is fitted  
with a trailer brake, apply the brakes gently at first,  
then brake firmly. This will avoid brake jolts result-  
ing from the trailer wheels locking.  
Select a lower gear before descending to also use  
the braking force of the engine.  
Distribution of the load over the vehicle and trailer  
combination  
Secure heavy objects against slipping, as close to  
the trailer axle as possible.  
Transport small and light objects in the luggage  
compartment.  
Permitted trailer loads  
The details in the technical vehicle documentation take precedence over the information in this Owner's Man-  
ual.  
WARNING  
Risk of an accident!  
Do not exceed the permissible trailer load.  
Engine type  
Gearbox  
Permissible trailer load,  
braked (kg) a)  
Permissible trailer load, un-  
braked (kg)  
Superb  
Superb Com-  
bi  
Superb  
Superb Com-  
bi  
DSG b)  
Manual gear-  
box  
1.4 l/110 kW TSI  
1.5 l/110 kW TSI  
1600  
1600  
1600  
1600  
720  
730  
730  
740  
DSG b)  
1600  
1800  
2000  
2200  
1500  
1600  
1800  
2000  
2200  
1500  
730  
750  
750  
750  
750  
740  
750  
750  
750  
750  
DSG b)  
DSG b)  
DSG b) 4x4  
DSG b)  
2.0 l/140 kW TSI  
2.0 l/162 kW TSI  
2.0 l/206 kW TSI  
2.0 l/90 kW TDI CR  
Manual gear-  
box  
2000  
2000  
750  
750  
2.0 l/110 kW TDI CR  
DSG b)  
2000  
2000  
2000  
2200  
2000  
2000  
2000  
2200  
750  
750  
750  
750  
750  
750  
750  
750  
DSG b)  
2.0 l/130 kW TDI CR  
2.0 l/147 kW TDI CR  
DSG b)  
DSG b) 4x4  
a)  
With gradients up to 12%.  
b)  
Automatic dual-clutch transmission.  
172 Starting and driving › Towing eye and towing procedure  
Towing eye and towing procedure  
Towing lug  
Removing the front cap  
Press on the cap and  
remove it.  
WARNING  
Risk of accident!  
Use a braided synthetic fibre rope for towing. Do  
not use a twisted tow rope.  
NOTICE  
Removing the rear cap  
Installing the towing eye  
After the towing process  
Always keep the tow rope taut during towing.  
Do not exceed a towing distance of 50 km.  
Press on the cap and  
remove it.  
NOTICE  
Danger of gearbox damage!  
If the gearbox no longer contains any oil, the vehi-  
cle must only be towed with the front axle raised  
clear of the ground or transported on a special  
breakdown vehicle.  
Vehicles with automatic transmission must not be  
towed without the ignition switched on or with the  
rear axle raised.  
Where should the tow rope or the tow bar be se-  
cured?  
At the front towing eye  
At the rear towing eye  
On the ball bar of the factory-installed towing  
hitch  
Screw in the towing  
eye.  
Insert the wheel  
wrench or similar ob-  
ject through the tow-  
ing eye.  
For vehicles with factory-fitted towing device, at  
the back there is no mount for a screw-in towing  
eye.  
Tighten the towing  
eye.  
Information for the driver of the towing vehicle  
Drive slowly and smoothly.  
Only accelerate once the rope is taut.  
Unscrew the towing eye.  
Insert the cover cap.  
Information for the driver of the towed vehicle  
Move the shift lever to the neutral position or the  
selector lever to the position.  
Towing the vehicle  
If it is not possible to start the engine, switch on  
the ignition!  
WARNING  
Risk of accident!  
WARNING  
Risk of accident!  
When the ignition is switched off, the brake booster  
and the power steering do not work. In addition,  
there is a risk that the steering lock will engage.  
The tow rope must not be twisted.  
When towing, drive at a speed of max. 50 km/h.  
If it is not possible to start the engine, switch on  
the ignition!  
Starting and driving › Brakes 173  
WARNING  
Danger of brake failure!  
If the brake fluid change date is exceeded, heavy  
braking may cause vapour bubbles to form in the  
brake system.  
Brakes  
What you should be mindful of  
WARNING  
Problems and faults with the brake system can ex-  
tend the braking distance of the vehicle!  
Troubleshooting  
DANGER  
Danger of a functional restriction of the brake boos-  
ter!  
Brake fluid level is too low  
illuminates  
When braking in a vehicle with manual transmis-  
sion, when the vehicle is in gear and at low revs,  
depress the clutch pedal.  
Stop driving! Seek the help of a specialist ga-  
rage.  
DANGER  
Danger of the brakes overheating!  
Do not depress the brake pedal unless braking is  
required.  
If the original front spoiler is damaged, ensure the  
air supply to the front brakes is guaranteed.  
Brake system and anti-lock braking system faulty  
illuminates together with  
Stop driving! Seek the help of a specialist ga-  
rage.  
Worn brake pads  
illuminates  
Drive to a specialist garage, exercising ap-  
propriate caution.  
Inspecting the brake fluid level  
Test conditions  
The vehicle is on a horizontal surface  
Reduced braking effect  
Damp, frozen, salt-affected or corroded brakes can  
impair the braking effect.  
The engine is off  
Checking  
Clean the brakes by braking several times if traffic  
conditions allow it.  
The fill level must be  
within the marked range.  
When the engine is stopped, the brake booster  
does not work  
If the level is below the  
mark  
tinue.  
, do not con-  
Depress the brake pedal more forcefully.  
Do not refill liquid.  
Seek the help of a spe-  
cialist garage.  
Electric parking brake  
Operation  
If the brake fluid level is  
too low, this will be indi-  
WARNING  
cated in the instrument cluster by the illumination of  
is displayed in the status bar. Nevertheless, we  
recommend checking the brake fluid level regularly  
directly at the reservoir.  
Danger of key locking!  
The recessed grip for the fingers in front of the  
button  
must remain empty.  
Manual switch on  
WARNING  
Danger of brake failure!  
If the fluid level falls significantly within a short time  
Pull the button  
hold it.  
and  
or drops below the mark  
have become leaky.  
, the brake system may  
The following symbols  
light up.  
Stop driving! Seek the help of a specialist garage.  
in the button.  
Specification  
in the instrument  
The brake fluid must comply with standard  
VW 501 14. This standard complies with the re-  
quirements of the FMVSS 116 DOT4 standard.  
cluster.  
Changing  
Automatic shut-off  
The parking brake switches off automatically when  
Have the brake fluid replaced by a specialist garage.  
starting up.  
174 Starting and driving › Auto Hold automatic holding function  
If automatic switch-off is to be prevented, e.g. when  
Emergency braking in case of faulty brake  
system  
starting off on a slope, keep the button  
pulled.  
Conditions for automatic shutting down  
Driver's door is closed, in some cases, the driver's  
Switching on  
Pull the button  
hold it.  
and  
seat belt is also fastened  
Manual shut-down  
The vehicle starts to  
brake sharply and an  
acoustic signal is soun-  
ded.  
With the ignition  
switched on, press the  
brake pedal and at the  
same time push the  
button.  
Switching off  
Release the button  
.
Or:  
Depress the accelerator pedal.  
Troubleshooting  
Parking brake error  
Auto Hold automatic holding function  
Usage  
illuminates  
Message regarding a parking brake error  
Auto Hold automatically secures the vehicle from  
rolling away when stopped.  
Seek the help of a specialist garage.  
Parking on a steep slope  
Functionality  
flashes  
Notification regarding parking position on a steep  
slope  
WARNING  
Risk of an accident!  
Auto Hold is not able to stop the vehicle under all cir-  
cumstances, such as on slippery ground, or on gradi-  
ents.  
Go to another parking spot where there is less of a  
slope.  
Noise when using the parking brake  
Noise when using the parking brake is normal. This is  
not a defect.  
Secure and release the vehicle  
With Stop, the vehicle is automatically secured us-  
ing Auto Hold.  
lights up in the instrument cluster.  
The 12 volt vehicle battery is discharged, the park-  
ing brake cannot be switched off  
Connect the 12 volt vehicle battery to a power  
source, such as the 12 volt vehicle battery of an-  
other vehicle.  
The brake pedal can be released.  
With Start, the vehicle is automatically released us-  
ing Auto Hold.  
Automatic protection from the parking brake  
Under certain circumstances, the vehicle can be se-  
cured using the parking brake.  
strument cluster.  
lights up in the in-  
Operating conditions  
The driver's door is closed.  
The engine is running or has been switched off by  
the START-STOPP system.  
Auto Hold is activated.  
On vehicles with an automatic gearbox, the selec-  
tor lever is not in mode.  

Related Topics

Popular Owner Manuals