Get Interior Equipment -> 6-8. Wireless Charger (If Equipped) Guide for Subaru Crosstrek SUV Third Generation (2024-2026)

(293,1)

北米Model "A1520BE-A" EDITED: 2022/ 11/ 22

Console USB power supply (charge only)

(if equipped)

– USB Type-A: DC 5 V/2.4 A*

– USB Type-C: DC 5 V/3.0 A*

*: The available electrical power of the two USB

terminals is a maximum of 5.4 A.

Use the USB terminal to use or charge an

electronic device.

When the ignition switch is in the “ACC” or

“ON” position, the power can be supplied

to the electronic device.

6-8. Wireless Charger (If

Equipped)

s06bh

Wireless charger

To charge a cell phone, smartphone or a

similar mobile device compatible with the

Qi wireless charging standard, place the

device in the charging area located below

the center information display.

The “Qi” logo is a trademark of the

Wireless Power Consortium.

1 Indicator light

2 Power switch

3 Charging area

NOTE

Mobile devices and wireless chargers

contain coils for charging. These coils

allow the wireless charging system to

charge a mobile device with a high level

of charging efficiency. When your de-

vice is in the charging area, the wireless

charger detects it and aligns an inte-

grated moving coil with the coil in your

device for charging. If vehicle vibration

causes the two coils to become mis-

aligned while the vehicle is in motion,

the moving coil of the wireless charger

automatically repositions itself and

resumes charging.

– CONTINUED –

Wireless Charger

291

Interior Equipment

(294,1)

北米Model "A1520BE-A" EDITED: 2022/ 11/ 22

However, if the mobile device moves

out of the charging area, charging will

automatically stop.

& How to Use the Wireless

Charger

s06bh01

1. The wireless charger operate when the

ignition switch is in the “ON” or “ACC”

position.

2. Press the power switch once to turn on

the wireless charger. When the wire-

less charger is ON, the indicator light

illuminates in green, and when the

wireless charger is OFF, the indicator

light turns off.

3. Place the mobile device so that the

screen or keypad is facing up (the

charging surface is facing downward).

The center of the device must also be

aligned with the center of the charging

area. Depending on the mobile device,

the charging coil may not be in the

center of the device. In such cases,

place the mobile device so that its

charging coil is in the center of the

charging area. The indicator light illu-

minates in orange during charging. If

the indicator light does not illuminate in

orange and device charging does not

occur, move the device to the center of

the charging area.

4. The indicator light illuminates in green

when charging is complete.

NOTE

The power status of the wireless char-

ger is stored even when the ignition

switch is turned to the “OFF” position.

! How to use the quick charge

s06bh0101

The following types of mobile devices

support quick charging as opposed to

normal charging (5 W).

. Mobile devices compliant with WPC*

Ver. 1.2.4 and compatible with fast

chargers can be charged up to 10 W.

. iPhone 8 (or later) with an iOS version

compliant with WPC* Ver. 1.2.4 and

compatible with 7.5 W charging.

* WPC: Wireless Power Consortium

1. Press the power switch three times to

change to the quick-charging mode

while your mobile device is charging in

normal mode. The indicator light will

change from orange to alternating

green and orange when the wireless

charger switches to the quick-charging

mode.

2. When charging is complete, the quick-

charging mode ends. To restart quick-

charging, switch to the quick-charging

mode again.

Wireless Charger

292

(295,1)

北米Model "A1520BE-A" EDITED: 2022/ 11/ 22

! Indicator light patterns

s06bh0102

Indicator light Interpretation

Off

The wireless charger is

turned off

Green (illumi-

nated)

Standby (ready for char-

ging)*

Charging is complete*

Orange (illumi-

nated)

A mobile device is in the

charging area (a mobile

device is being detected)

Charging

Green and or-

ange illuminate

alternately

Quick charging is in pro-

gress

*1: No power is output for charging when the

wireless charger is in standby mode. Even if

metal objects are placed on the charging tray

in this state, they will not overheat.

*2: For some mobile devices, the indicator light

remains orange even after charging is

complete.

! List of warnings

s06bh0103

Indicator light

Possible

causes

Solution

Flashes or-

ange once

per second

A communi-

cation error

occurred be-

tween the

wireless

charger and

the access

key fob.

If the engine

is running,

stop the en-

gine and re-

start it.

If the ignition

switch is in

“ACC”, start

the engine

once.

Repeatedly

flashes or-

ange three

times

Metallic for-

eign object

detected.

A foreign ob-

ject is de-

tected be-

tween the

mobile device

and the char-

ging area.

The mobile

device is out

of alignment:

The overheat

prevention

function of

the charging

coils was trig-

gered be-

cause the

mobile de-

vice’s char-

ging coils

were out of

alignment

with the char-

ging area.

Remove any

foreign ob-

jects between

the mobile

device and

the charging

area.

Remove the

mobile device

from the

charging

area, check

that the acti-

vation indica-

tor light is illu-

minating in

green again,

and place the

device in the

center of the

charging

area. If there

is a case or

cover on your

mobile de-

vice, be sure

to remove it.

Indicator light

Possible

causes

Solution

Repeatedly

flashes or-

ange four

times

The tempera-

ture inside

the wireless

charger has

increased.

Remove the

mobile device

from the

charging area

temporarily to

stop char-

ging. When

the tempera-

ture of the

heavy electri-

cal equipment

cools down,

start charging

the device

again.

NOTE

If you hear noise on the AM radio while

your device is charging, you may be

able to reduce the noise by changing

the charging frequency.

To change the charging frequency,

press and hold the power switch to

turn on the system.

After a certain amount of time, the

indicator light will flash orange twice

to indicate the frequency switch.

WARNING

. For safety reasons, drivers must

not operate a charging mobile

device while driving.

– CONTINUED –

Wireless Charger

293

Interior Equipment

(296,1)

北米Model "A1520BE-A" EDITED: 2022/ 11/ 22

. Do not charge small devices such

as cordless headphones or light-

weight cell phones while driving.

Due to their light weight, these

devices may be thrown from the

charging tray resulting in an

accident.

. The wireless power receiver can

affect some implanted or other

electrical medical devices. If you

use a cardiac pacemaker, ventri-

cular pacing pulse generator,

cardioverter-defibrillator, or a si-

milar device, consult with your

physician before using the wire-

less charger.

. Before charging your device,

make sure that there is no metal

between the charging area and

the mobile device. Metal objects

may generate heat and cause

burns when placed in the char-

ging area.

. Do not apply strong force or

impact to the charging area.

. Do not affix aluminum stickers to

or place other metal objects in

the charging area. Also, do not

charge a mobile device that has

aluminum stickers or other metal

objects attached to it that may

come in contact with the char-

ging area. Metal objects may

generate heat and cause burns

when placed in the charging area.

. Do not disassemble, modify, or

remove the wireless charger.

. Do not place magnetized objects

in or near the charging area.

. During charging, do not cover

your device with a cloth, etc.

. Do not charge your device in

dusty conditions.

. Make sure that no foreign objects

or liquids are placed or spilled in

the wireless charger.

CAUTION

. Do not place the access key fob

near the wireless charger.

. When your device is charging,

keep any magnetic cards such as

credit cards and precision de-

vices such as watches away from

the charging area. They may be

damaged. To prevent dischar-

ging the vehicle battery, do not

use the wireless charger for long

periods of time when the engine

is stopped.

. If the access key fob cannot be

detected in the cabin, the battery

cannot be charged. In addition,

charging may be temporarily sus-

pended when the remote keyless

entry system is in operation,

such as when opening and clos-

ing doors.

. Remove the device case to

charge the mobile battery.

. Do not leave objects in the trays

unattended for a long period of

time. The paint on the trays may

deteriorate depending on the

type of device case or accessory.

. If your mobile device does not

charge even after you place it in

the charging area, remove the

device case and any accessories.

. When the OS version of a mobile

device is updated, the charging

specifications may change sig-

nificantly. Also, if the OS versions

compatible with WPC change, the

quick charging function may be-

come unavailable. For details,

check the website of your mobile

device manufacturer.

. To prevent discharging the vehi-

cle battery, do not use the wire-

less charger for long periods of

Wireless Charger

294

(297,1)

北米Model "A1520BE-A" EDITED: 2022/ 11/ 22

time when the engine is stopped.

NOTE

. This function is not available for

devices larger than the charger tray.

. The wireless charger and mobile

device will emit heat during char-

ging, but this is not a malfunction.

. When your mobile device emits heat

during charging, the mobile device’s

protective function may cancel char-

ging.

. A beep will sound when the power

switch of the wireless charger is

pressed to turn the power ON or

when a mobile device is being

detected. This is not a malfunction.

. The fan may activate when the

temperature rises, but this is not a

malfunction.

. Qi standard wireless charger can be

used on compatible devices. How-

ever, not all Qi standard devices and

compatibility are guaranteed.

& Certification for the Wireless

Charger

s06bh02

. The U.S. and other FCC compliant

countries

FCC ID: ACJ932AF2201

CAUTION

FCC CAUTION

Changes or modifications not ex-

pressly approved by the party re-

sponsible for compliance could void

the user’s authority to operate the

equipment.

This equipment has been tested and

found to comply with the limits for a

wireless power charger, pursuant to

part 18 of the FCC Rules.

This equipment generates, uses and

can radiate radio frequency energy

and, if not installed and used in

accordance with the instructions,

may cause harmful interference to

radio communications.

However, there is no guarantee that

interference will not occur in a

particular installation.

If this equipment does cause harm-

ful interference to radio communica-

tions, which can be determined by

turning the equipment off and on,

the user is encouraged to try to

correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between

the equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

This equipment complies with FCC

radiation exposure limits set forth

for an uncontrolled environment

and meets the FCC radio frequency

(RF) Exposure Guidelines. This

equipment should be installed and

operated keeping the radiator at

least 20 cm or more away from

person’s body.

NOTE

This device complies with part 15 and

part 18 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received, in-

cluding interference that may cause

– CONTINUED –

Wireless Charger

295

Interior Equipment

Interior Equipment -> 6-8. Wireless Charger (If Equipped) for Your Subaru Crosstrek SUV Third Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals