2005-2009 Subaru Outback SUV Audio -> Power and sound controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> Power and sound controls for Your Subaru Outback SUV Third Generation (2005-2009)

Black plate (197,1)
北米Model "A2420BE-B" EDITED: 2006/ 7/ 26
Power and sound controls
& Power switch and volume
control
The dial is used for both power (ON/OFF)
and volume control. The radio is turned
ON and OFF by pushing the dial and the
volume is controlled by turning the dial.
The dial can also be used for tone and
balance adjustment.
& Tone and balance control
The volume control dial normally functions
as a volume control. This dial becomes a
control for Bass, Midrange, Treble, Fader
or Balance when you select the appro-
priate tone and balance control mode.
Choose desired volume level for each
mode by turning the volume control dial.
The control function returns to volume
control mode after approximately 5 sec-
onds.
! To change tone control modes
Each brief press of the “AUDIO” button
changes control modes in the following
sequence starting from volume control
mode. (When the radio is first turned on,
the control mode is in the volume control.)
The “AUDIO” button is used for selecting
the following control modes:
Audio 5-7
– CONTINUED –
5
Black plate (198,1)
北米Model "A2420BE-B" EDITED: 2006/ 7/ 26
5-8 Audio
Control mode (Range of levels)
Turn counterclockwise Turn clockwise
Bass control (−6 to +6) For less bass sound For more bass sound
Midrange control (−6 to +6) For less midrange sound For more midrange sound
Treble control (−6 to +6) For less treble sound For more treble sound
Volume control (0 to 40) For less volume For more volume
AUX volume control* (0 to 40) For less volume
For more volume
* Only when an AUX audio product is connected.
! To change balance control modes
Each brief press of the “BAL” button
changes control modes in the following
sequence starting from volume control
mode. (When the radio is first turned on,
the control mode is in the volume control.)
The “BAL” button is used for selecting the
following control modes:
Black plate (199,1)
北米Model "A2420BE-B" EDITED: 2006/ 7/ 26
Control mode (Range of levels)
Turn counterclockwise Turn clockwise
Fader control (R9 to F9)
To decrease front speaker vo-
lume
To decrease rear speaker vo-
lume
Balance control (L9 to R9)
To increase left speaker vo-
lume and decrease right
speaker volume
To increase right speaker vo-
lume and decrease left speaker
volume
Volume control (0 to 40) For less volume For more volume
AUX volume control* (0 to 40) For less volume
For more volume
* Only when an AUX audio product is connected.
& Audio effector switching
(type B)
1. When continuing to press the “AUDIO ”
button, the “SRS WOW” of audio effector
system starts up with a beep sound. The
illumination “
” of the indicator shows
the status of the SRS WOW mode
selection.
2. When continuing to press the “AUDIO ”
button in the SRS WOW mode, the beep
sound and the SRS WOW mode finish,
and the “
” turns off.
NOTE
SRS technology is incorporated under
license from SRS Labs, Inc. SRS WOW,
SRS and
symbol are trademarks of
SRS Labs, Inc.
Audio 5-9
– CONTINUED –
5
Black plate (200,1)
北米Model "A2420BE-B" EDITED: 2006/ 7/ 26
5-10 Audio
The SRS WOW mode has the following
qualities.
. Natural feeling of stereophonic ef-
fect
. Rich and varied bass sound
. Crystal-clear sound
FM/AM radio operation
& FM/AM selection
Push the “FM AM” button when the radio
is off to turn on the radio.
Push the “FM AM” button when the radio
is on to select FM1, FM2 or AM reception.
Each brief press of the “FM AM” button
changes the radio in the following se-
quence starting from the last radio band
with you selected.
& Tuning
! Manual tuning
Press the “ ” side of the TUNE/TRACK
button to increase the tuning frequency
and press the tuning button marked “
”
to decrease it.
Each time the button is pressed, the
frequency interval can be changed be-
tween 10 kHz in the AM mode and 0.2
MHz in the FM mode.
If you hold down the “
” side of the
button, the tuning frequency will increase
continuously, and if you hold down the
“
” side of the button, the tuning
frequency will decrease continuously. Re-
lease t he button when your desired
frequency is reached.

Related Topics

Popular Owner Manuals