Get Seat, seatbelt and SRS airbags -> Memory function Guide for Subaru Outback SUV Third Generation (2005-2009)

Black plate (31,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

To adjust the angle of the seatback, move

the control switch.

! Seat cushion angle adjustment

(Driver’s seat only)

To adjust the seat cushion angle, pull up

or push down the front end of the control

switch.

! Seat height adjustment (Driver’s

seat only)

To adjust the seat height, pull up or push

down the rear end of the control switch.

& Memory function (Driver’s

seat only, if equipped)

Two of your favorite seat positions can be

registered. Register the seat position with

button “1” or “2” and retrieve the seat

position by pressing either button.

The following seat positions can be

registered:

. Forward/backward position of the seat

. Angle of seatback

. Angle of seat cushion

. Height of seat

! Registration of seat position

WARNING

. Never adjust the seat while driv-

ing to avoid the possibility of

loss of vehicle control and of

personal injury.

. Before adjusting the seat, make

sure the hands, feet and posses-

sions of rear seat passengers are

clear of the adjusting mechan-

ism.

. Before registering the seat posi-

tion, confirm that the shift lever is

in the “P” position (AT vehicles)

or the parking brake lever i s

applied (MT vehicles).

1. Shift the shift lever in the “P” position

(AT vehicles) or apply the parking brake

(MT vehicles).

2. Adjust the seat position.

Seat, seatbelt and SRS airbags 1-5

– CONTINUED –

Black plate (32,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

1-6 Seat, seatbelt and SRS airbags

3. While pressing the “SET” button, press

the desired button “1” or “2”.

4. The chirp sounds once, and the seat

position is registered.

! Retrieval of seat position

WARNING

. Never retrieve the seat position

while driving to avoid the possi-

bility of loss of vehicle control

and of personal injury.

. Perform the seat position retrie-

val before driving. Before retriev-

ing the seat position, confirm

that the shift lever is in the “P”

position (AT vehicles) or the

parking brake lever is applied

(MT vehicles). Do not drive until

the retrieval of the seat position

is complete.

. Be sure to press the registered

button of your seat position to

retrieve the seat position. If the

seat position is not optimum, an

incorrect driving position dis-

turbs driving and also the seat-

belt does not function correctly,

which could result in serious

injury or death.

. To retrieve the seat position,

make sure the hands, feet or

luggage of rear seat passengers

are clear of the seat adjusting

mechanism.

. When any trouble or malfunction

occurs during the retrieval of the

seat position, stop the retrieval of

the seat position using the con-

trol switch f or manual adjust-

ment.

1. Shift the shift lever in the “P” position

(AT vehicles) or apply the parking brake

(MT vehicles).

2. Press the desired button “1” or “2”.

3. The chirp sounds once and the seat

moves to the registered position.

4. When the seat moves to the registered

position, the chirp sounds twice.

WARNING

. Be sure to press the registered

button of your seat position to

retrieve the seat position. If the

seat position is not the optimum,

an incorrect driving position dis-

turbs driving and also the seat-

belt does not function correctly,

which could result in serious

Black plate (33,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

injury or death.

. To retrieve the seat position,

mak e sure the hands, feet or

luggage of rear seat passengers

are clear of the seat adjusting

mechanism.

NOTE

. If a new position is registered for the

same button, the previous seat posi-

tion is deleted.

. If the battery is disconnected, the

registered seat position is not deleted.

& Head restraint adjustment

To raise the head restraint, pull it up. To

lower it, push the head restraint down

while pressing the release button on the

top of the seatback.

The head restraint should be adjusted so

that the center of the head restraint is

closest to the top of the occupant’s ears.

WARNIN G

Never drive the vehicle with the

head restraints removed because

they are designed to reduce the risk

of serious neck injury in the event

that the vehicle is struck from the

rear.

& Active head restraint

The front seats o f your vehicle a re

equipped with active head restraints. They

automatically tilt forward slightly in the

event the vehicle is struck from the rear,

decreasing the amount of rearward head

movement and thus reducing the risk of

whiplash. For maximum effectiveness the

head restraint should be adjusted so that

the center of the head restraint is closest

to the top of the occupant ’s ears.

CAUTION

. Each active head restraint is

effective only when its height is

properly adjusted and the driver/

passenger sits in the correct

position on the seat.

. If your vehicle is involved in a

rear-end collision, have an

authorized SUBARU dealer in-

spect the active head restraints.

. The active head restraints may

not operate in the event the

vehicle experiences only a slight

impact in the rear.

. The active head restraints may be

damaged if they are pushed hard

from behind or subjected to

shock. As a result, they may not

function if the vehicle suffers a

rear impact.

Seat, seatbelt and SRS airbags 1-7

– CONTINUED –

Seat, seatbelt and SRS airbags -> Memory function for Your Subaru Outback SUV Third Generation (2005-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals