2020-2025 Subaru Outback SUV Interior Equipment -> 6-13. Lifting Cargo Cover (Outback/Subaru Outback Wilderness ? If Equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Equipment -> 6-13. Lifting Cargo Cover (Outback/Subaru Outback Wilderness ? If Equipped) for Your Subaru Outback SUV Sixth Generation (2020-2025)

(339,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
. Do not use more than one floor
mat.
Retaining pins are located on the driver’s
side floor.
The floor mat should be properly secured
using the built-in grommets, by placing the
grommets over the pins and pushing them
downward.
6-13. Lifting Cargo Cover
(Outback/Subaru Outback
Wilderness – If Equipped)
s06ak
The Lifting Cargo Cover is provided to
cover the cargo area and to protect its
contents from direct sunlight.
The cover also has the practicability of its
easy lift-up function, eliminating the need
to rewind the cover all the way when
accessing the cargo.
This cover can be detached to make room
for additional cargo.
1) Cargo area cover
2) Cover housing
3) Front cover
4) Front cover rod
& To Install the Cover Housing
s06ak05
1. Insert the left side cover housing end
into the retainer, then insert the right cover
housing end into the right retainer.
Make sure both ends are clicked into the
retainers.
NOTE
If the label on the cover housing is
placed on the top, the cover housing
will be installed in reverse and it will not
be affixed to the vehicle body.
– CONTINUED –
Lifting Cargo Cover (Outback/Subaru Outback Wilderness – If Equipped)
337
6
Interior Equipment
(340,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
2. Align the right side of the front cover
rod end with a triangle mark on the cargo
area trim.
NOTE
When the rear seatbacks are reclined,
align the front cover rod to the rear
triangle mark.
3. Push the front cover rod on the right
side against the cargo area trim to shorten
the front cover rod.
4. Once the right side is aligned, align the
left side to a triangle mark on the cargo
area trim to fix the front cover in place.
CAUTION
When reclining the rear seatback,
move the front cover backward so
that the cover is not damaged
& Using the Cover
s06ak01
WARNING
Do not place anything on the ex-
tended cover. Putting excessive
weight on the extended cover can
break it and the object on the cover
could tumble forward in the event of
a sudden stop or collision. This
could cause serious injury.
CAUTION
Be careful not to scratch the rear
gate stays while extending and re-
winding the cover. Scratches on the
stays could cause leakage of gas
from the stays, which may result in
their inability to hold the rear gate
open.
! To extend the cover
s06ak0101
A) Stopper
1) Tilt up
2) Pull out
1. Hold the cover by the handle in the
center, tilt it up and pull it out to free the
stoppers.
Lifting Cargo Cover (Outback/Subaru Outback Wilderness – If Equipped)
338
(341,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
2. Pull out the cover by the handle in the
center to extend it. Then insert the
stoppers into the catches as shown.
! To rewind the cover
s06ak0103
1. Hold the cover by the handle in the
center and pull it toward you, then slightly
lower it to free the stoppers in the catches.
A) Stopper
1) Rewind
2) Tilt up
2. Slowly rewind the cover completely.
Then tilt the cover up by the handle to hook
the stoppers.
CAUTION
Do not leave the cover dangling.
Make sure the stoppers are hooked
on to the cover housing. Otherwise
the cover may be torn and damaged.
! To lift the cover
s06ak0102
CAUTION
Do not drive with the cover lifted up.
Doing so could obstruct the rear-
ward view.
– CONTINUED –
Lifting Cargo Cover (Outback/Subaru Outback Wilderness – If Equipped)
339
6
Interior Equipment
(342,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
1. Push down the handle in the center to
lift the cover up.
The stoppers will slide up the grooves and
stop at the top.
2. To lower the lifted cover, hold the cover
by the handle and pull it back into to the
catches.
& To Remove the Cover Hous-
ing
s06ak02
1. Slowly rewind the cover completely.
Then tilt the cover up by the handle to hook
the stoppers.
2. Push the front cover rod on the right
side against the cargo area trim to shorten
the front cover rod.
3. Remove the front cover and place it on
the cover housing.
4. Hold down the button on the right-hand
cargo area trim and lift up the right-hand
cover housing end.
5. Gently slide the left-hand cover end out
to the right then remove the cover housing.
Lifting Cargo Cover (Outback/Subaru Outback Wilderness – If Equipped)
340
(343,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
& To Stow the Cover
s06ak11
The cover can be stowed in the under-floor
storage.
1. To open the cargo floor lid, pull the
handle up.
2. Use the hook provided on the back to
hang the cargo floor lid open.
The hook can be hanged onto the opening
of the rear gate.
3. Remove the left and right corners of
the cargo floor lid.
4. Stow the cover housing in the cargo
area under-floor storage.
NOTE
To make enough room for the cover
when stowing, first insert the right-
hand side into the ditch on the cargo
area trim.
– CONTINUED –
Lifting Cargo Cover (Outback/Subaru Outback Wilderness – If Equipped)
341
6
Interior Equipment
(344,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
& To Take Out the Stowed Cover
s06ak10
1. Raise the cover.
2. Take out the cover housing by lifting it
toward you.
6-14. Convenient Tie-Down
Hooks (Outback/Subaru
Outback Wilderness)
s06am
CAUTION
The convenient tie-down hooks are
designed only for securing light
cargo. Never try to secure cargo that
exceeds the capacity of the hooks.
The maximum load capacity is 110
lbs (50 kg) per hook.
The cargo area is equipped with several
tie-down hooks so that cargo can be
secured with a luggage net or ropes.
When using the tie-down hooks, turn them
down out of the storing recesses. When
not in use, put the hooks up into the storing
recesses.
Convenient Tie-Down Hooks (Outback/Subaru Outback Wilderness)
342

Related Topics

Popular Owner Manuals