4-7
Climate control/Automatic climate control operation (type B, C and D)
Automatic climate control
. when the AUTO mode is selected:
3. To turn off the climate control system,
OFF (outside air)
press the “OFF” button. Then the air inlet
operation (type B, C and D)
selection will be set to OFF (outside air).
. when the AUTO mode is not se-
lected: the mode that was selected
When this mode is selected, the fan
& Operation tips
when turning off the climate system
speed, airflow distribution, air-inlet control,
will be selected.
. Operate the automatic climate control
and air conditioner compressor operation
system when the engine is running.
are automatically controlled. To activate
& Type C and D
. Even when cooling is not necessary,
this mode, perform the following.
setting the temperature much lower than
1. Depress the “AUTO” button. The
the current outlet air temperature turns on
& Type B
indicator light “FULL AUTO” on the display
the air conditioner compressor automati-
illuminates.
1. Turn the airflow mode selection dial
cally and the “A/C” indicator light on the
2. Set the preferred temperature using
and fan speed control dial to the “AUTO”
control panel illuminates.
the temperature control dial.
position.
2. Set the preferred temperature using
NOTE
the temperature control dial.
. The controllable temperature range
may vary depending on the regional
NOTE
specifications of the vehicle.
. Each function can be individually
. If you operate any of the buttons on
set to the AUTO mode independently of
the control panel other than the “OFF”
the other functions. Any function set to
button, rear window defogger button
the AUTO mode is controlled automa-
and temperature control dial(s) during
tically. Any function not set to the
FULL AUTO mode operation, the
AUTO mode can be manually adjusted
“FULL” indicator light on the control
as desired.
panel will turn off and the “AUTO”
. The controllable temperature range
indicator light will remain illuminated.
may vary depending on the regional
You can then manually control the
specifications of the vehicle.
system as desired using the button
you operated. To change the system
3. To turn off the climate control system,
back to the FULL AUTO mode, press
turn the fan speed control dial to the “OFF”
the “AUTO” button.
position. Then the air inlet selection will be
set as follows.
– CONTINUED –