1-5
Seat, seatbelt and SRS airbags/Front seats
& Head restraint adjustment
are located on the top of the seatback until
! Head restraint height adjustment
the head restraint locks.
WARNING
! Head restraint angle adjustment
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints the opposite
way round. Doing so will prevent
the head restraints from func-
tioning as intended. Therefore,
when you remove the head re-
1)
Head restraint
straints, you must reinstall all
2)
Release button
head restraints correctly to pro-
The angle of the head restraint can be
Each head restraint should be adjusted so
tect vehicle occupants.
adjusted in several steps. While maintain-
that the center of the head restraint is
. All occupants, including the dri-
ing a suitable driving posture, adjust the
closest to the top of the occupant’s ears.
ver, should not operate a vehicle
head restraint to a position where the back
or sit in a vehicle’s seat until the
To raise:
of your head is as close to the head
head restraints are placed in their
Pull the head restraint up.
restraint as possible.
proper positions in order to mini-
To lower:
mize the risk of neck injury in the
To tilt:
Push the head restraint down while
event of a crash.
Tilt the head restraint by hand to the
pressing the release button on the top of
preferred position. A click will be audible
the seatback.
The head restraints for the driver’s seat
when the head restraint is locked.
To remove:
and front passenger’s seat are adjustable
To return:
While pressing the release button, pull out
in the following ways.
Tilt the head restraint once as far forward
the head restraint.
as it can go. The head restraint will
To install:
automatically return to the fully upright
Install the head restraint into the holes that
position. Then, adjust the head restraint
– CONTINUED –
English 
