4-6
Climate control/Automatic climate control operation (type B and C)
Automatic climate control
& Sensors
operation, the <FULL= indicator light on
the multi-function display (color LCD)
operation (type B and C)
S04AI03
The sensors are located as follows.
will turn off and the <AUTO= indicator
S04AI
light will remain illuminated. You can
When this mode is selected, the fan speed,
then manually control the system as
airflow distribution, air-inlet control, and air
desired using the button you operated.
conditioner compressor operation are
To change the system back to the FULL
automatically controlled. To activate this
AUTO mode, press the AUTO button.
mode, perform the following.
1. Press the AUTO button. The indicator
To turn off the climate control system,
light <FULL AUTO= on the multi-function
press the ON/OFF button. Then the air
display (color LCD) illuminates.
inlet selection will be set to the following.
2. Set the preferred temperature using
. When the air inlet selection is set to
the temperature control dial.
auto mode: Outside air circulation
. When the air inlet selection is set to
NOTE
manual mode: No change
. Operate the automatic climate con-
trol system when the engine is running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the <A/C= indicator light on the
control panel illuminates.
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If you operate any of the buttons on
1)
Interior air temperature sensor
the control panel other than the ON/
2)
Solar sensor
OFF button, rear window defogger
The automatic climate control system
button, SYNC button and temperature
employs several sensors. These sensors
control dial(s) during FULL AUTO mode
English 
