Maintenance and service/Installation of accessories 11-35
Installation of accessories
Pinch the upper part of the fuse puller
when removing it from the main fuse box.
S11BD
Always consult your SUBARU dealer
before installing fog lights or any other
electrical equipment in your vehicle. Such
accessories may cause the electronic
system to malfunction if they are incor-
rectly installed or if they are not suited for
the vehicle.
4. Pull out the fuse with the fuse puller.
5. Inspect the fuse. If it has blown,
1)
Good
replace it with a spare fuse of the same
2)
Blown
rating.
If any lights, accessories or other electrical
6. If the same fuse blows again, this
controls do not operate, inspect the corre-
indicates that its system has a problem.
sponding fuse. If a fuse has blown, replace
Contact your SUBARU dealer for repairs.
it.
1. Turn the ignition switch to the <LOCK=/
<OFF= position and turn off all electrical
accessories.
2. Remove the cover.
3. Determine which fuse may be blown.
Look at the back side of each fuse box
cover and refer to <Fuses and circuits=
F12-10.