Get Combination meter display (color LCD) (if equipped) -> Menu screens Guide for Subaru XV SUV Third Generation (2022-2026)

(179,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

& Menu screens

S03BN07

Pull and hold the “ /SET” switch to enter

the menu screens when all of the following

conditions are satisfied.

. The menu screen entering screen is

selected.

. The “

” information reminder is off.

NOTE

. While driving, the setting items

available on the combination meter

display (color LCD) are limited.

. For function settings and adjust-

ments on the combination meter dis-

play, refer to “Function settings and

adjustments on the combination meter

display (color LCD)” F25.

By operating the “

” or “ ” switch on the

steering wheel, you can select the menu.

Pull the “

/SET” switch to enter the

selected menu.

NOTE

If you enter the “Go Back” menu, the

system will return to the previous

screen.

! Screen Settings

S03BN0701

After entering the “Screen Settings” menu,

select one of the following menus.

! Welcome Screen

S03BN070101

The welcome screen can be activated or

deactivated.

! Good-bye Screen

S03BN070106

The good-bye screen can be activated or

deactivated.

! Gauge Initial Movement

S03BN070102

The movement of the meter needles and

gauge needles that occurs when the

ignition switch is turned to the “ON”

position can be activated or deactivated.

! Units

S03BN070108

Changes the units displayed in the combi-

nation meter display (color LCD), the multi-

function display (black and white) and the

multi-function display (color LCD).

! Tire Pressure Units (if equipped)

S03BN070109

Changes the units displayed in the Tire

Pressure Monitoring system.

! Languages

S03BN070103

Changes the language displayed in the

combination meter display (color LCD)

and the multi-function display (color LCD).

! Warning Volume (if equipped)

S03BN0713

Sets the EyeSight warning volume, the

BSD/RCTA warning volume and the Re-

verse Automatic Braking (RAB) warning

volume.

! Rear Seat Reminder (models with

combination meter display (color

LCD))

S03BN0715

The Rear Seat Reminder can be activated

or deactivated.

! EyeSight (models with EyeSight

system)

S03BN0702

NOTE

For models with the EyeSight system,

refer to the Owner’s Manual supple-

ment for the EyeSight system.

! RAB (if equipped)

S03BN0712

The Sonar Audible Alarm can be set to on

or off.

NOTE

For models with Reverse Automatic

Braking (RAB) system, refer to “Re-

verse Automatic Braking (RAB) sys-

tem” F7-71.

! Sonar Audible Alarm

S03BN071204

When the Reverse Automatic Braking

(RAB) system is in operation, the warning

sound to notify that an obstacle is detected

in the rear can be activated or deactivated.

– CONTINUED –

Instruments and controls/Combination meter display (color LCD)

3-41

(180,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

! Vehicle Setting

S03BN0708

After entering the “Vehicle Setting” menu,

select one of the following menus.

! Keyless Entry System

S03BN070801

Sets the settings used when the keyless

access function was operated.

. Audible Signal (if equipped)

Sets the electronic chirp that sounds when

the door is locked or unlocked.

. Hazard Warning Flasher

Sets the operation of the hazard warning

flasher that blinks when the door is locked

or unlocked.

. Driver Door Unlock (if equipped)

Select only the driver’s door to unlock or all

doors to unlock simultaneously when the

driver’s door is unlocked.

. Rear Gate/Trunk Unlock (if equipped)

Select only the rear gate to unlock or all

doors to unlock simultaneously when

accessing from the cargo area.

! Defogger

S03BN070802

Sets and customizes the operation of the

defogger.

! Interior Light

S03BN070803

Sets and customizes the interior light off

delay timer.

! Auto Door Lock and Unlock

S03BN070808

Setting conditions for Auto Door Lock and

Unlock

. Auto Door Lock:

Set the condition of the following items to

lock the door automatically.

– Vehicle Speed: When the vehicle

speed reaches more than 12 mph (20

km/h).

– Shift Into or Out of PARK: When the

select lever is shifted into a position

other than the “P” position (CVT

models).

– Off: When the function is set to OFF.

. Auto Door Unlock:

Set the conditions of the following items to

unlock the door automatically.

– Shift Into or Out of PARK: When the

select lever is shifted into the “P”

position (CVT models).

– Ignition OFF: When the ignition

switch is turned to OFF.

– Driver Door Open: When the dri-

ver’s door is open.

– Off: When the function is set to OFF.

! Auto Light Sensor (if equipped)

S03BN070804

Sets and customizes the sensitivity of the

auto light sensor.

! Welcome Lighting (if equipped)

S03BN070806

Sets the leaving time and approaching

time.

. Approaching time set

Sets the illumination time of the headlights

that illuminate when you approach the

vehicle.

. Leaving time set

Sets the time until the headlights turn off

when you have moved away from the

vehicle.

! One-touch lane changer

S03BN070807

Sets the one-touch lane changer on/off.

! Default Settings

S03BN0704

Select “Yes” to use the menu screen to

restore customized settings to the factory

default settings. Select “No” to return to the

previous screen without restoring to the

factory default settings.

Instruments and controls/Combination meter display (color LCD)

3-42

Combination meter display (color LCD) (if equipped) -> Menu screens for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals