2022-2026 Subaru XV SUV Door locks -> Automatic door locking/unlocking User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Door locks -> Automatic door locking/unlocking for Your Subaru XV SUV Third Generation (2022-2026)

(127,1)
北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
seatbelts and child restraints,
locking the doors reduces the
chance of being thrown out of
the vehicle in an accident.
It also helps prevent passengers
from falling out if a door is
accidentally opened, and intru-
ders from unexpectedly opening
doors and entering your vehicle.
. Do not pull the front door handle
from inside while driving. The
door could open even if it is
locked.
! How to operate the power door
locking switches
S02AC0203
All doors and the rear gate can be locked
and unlocked using the power door locking
switches located at the driver’s side and
the front passenger’s side doors.
Example
1) Press to lock.
2) Press to unlock.
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.
& Automatic door locking/un-
locking
S02AC08
All doors are automatically locked or
unlocked under the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
– When the select lever is shifted into
a position other than the “P” position
(CVT models).
. For automatic door unlocking
– When the driver’s door is open
(factory default setting).
– When the ignition switch is turned to
the “OFF” position.
– When the select lever is shifted into
the “P” position (CVT models).
NOTE
. The automatic door locking/unlock-
ing function can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details. Also, for models with
a combination meter display (color
LCD), the setting can be changed using
the display. For details, refer to “Auto
Door Lock and Unlock” F3-42.
. When locking the door by operating
the power door locking switches, auto-
matic door locking will not operate.
. When unlocking the door by operat-
ing the power door locking switches,
automatic door unlocking will not oper-
ate.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
– CONTINUED –
Keys and doors/Door locks
2-23
2
(128,1)
北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
lever then the door is opened and
closed, the Key lock-in prevention
function will be triggered. All doors will
be unlocked, the Key lock-in prevention
warning indicator “
” will appear and
the warning chime will also sound.
& Key lock-in prevention func-
tion
S02AC06
Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with the front door
open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless ac-
cess with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as “operational”.
This function’s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.
! Non-operation of key lock-in pre-
vention function
S02AC0602
When the system is set so that it does not
operate, the doors are locked by the
following operation.
. If the lock lever is turned to the front
(“LOCK”) position with the driver’s door
open and the driver’s door is then closed
with the lock lever in that position, the
driver’s door is locked.
. If the spare key is used to lock the
driver’s door from the outside of the
vehicle, the door is locked.
& Battery drainage prevention
function
S02AC03
If a door or the rear gate is not completely
closed, the interior lights will remain
illuminated as a result. However, several
lights are automatically turned off by the
battery drainage prevention function to
prevent the battery from discharging. The
following interior lights are affected by this
function.
Item
Switch
position
Automatically turning
off
Map lights DOOR
Approximately 20
minutes later
Dome light DOOR
Approximately 20
minutes later
Item
Switch
position
Automatically turning
off
Ignition
switch light
—
Approximately 20
minutes later
Cargo area
light
DOOR
Approximately 20
minutes later
Rear gate
light (if
equipped)
DOOR
Approximately 20
minutes later
NOTE
. The default setting for this function
is set as “operational”. The operational/
non-operational setting of this function
can be changed by a SUBARU dealer.
Contact your SUBARU dealer to
change the setting.
. When leaving the vehicle, please
make sure that all doors and the rear
gate are completely closed.
. The battery drainage prevention
function does not operate while the
key is in the ignition switch.
Keys and doors/Door locks
2-24

Related Topics

Popular Owner Manuals