北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
NOTE
The ON/OFF setting of this function can
be changed by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
“
” position (except for Canada mod-
els):
The headlights are all off.
“OFF” position (for Canada models):
The headlights are all off *
1
*
2
.
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
. The engine is running.
. The parking brake is fully released.
. For CVT models, the select lever is in a
position other than the “P” position.
! Welcome lighting function (if
equipped)
S03AH0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning
off the light switch, the welcome light-
ing function may not operate (for
Canada models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights, park-
ing lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights will automatically illuminate when
unlocking the doors and the rear gate by
using the remote keyless entry system.
The lights will remain illuminated for 30
seconds*
1
and then turn off. However, if
any of the following operations is done, the
light will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights, park-
ing lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights will remain illuminated even when
either of the following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The lights will turn off under any of the
following conditions.
. 3 minutes have passed since the light
were illuminated by the welcome lighting
function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
lights remain on by the welcome lighting
function can be changed by a SUBARU
Instruments and controls/Light control switch
3-70
English 
