Get Multi-function display (black and white) Guide for Subaru XV SUV Third Generation (2022-2026)

(181,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

Multi-function display (black

and white)

S03BO

NOTE

For models with multi-function display

(color LCD), refer to “Multi-function

display (color LCD)” F3-49.

Multi-function display (black and white)

type A

1) Clock

2) Auto Start Stop system (if equipped)

3) Outside temperature indicator

4) Driving information display

5) Climate control screen

Multi-function display (black and white)

type B

1) Outside temperature indicator

2) X-MODE indicator (if equipped)

3) Driving information display

4) Clock

With the ignition switch in the “ACC”

position, the clock appears on the display.

With the ignition switch in the “ON” posi-

tion, the outside temperature indicator,

driving information display and clock all

appear on the display.

NOTE

The indicated values vary in accor-

dance with changes in the vehicle’s

running conditions. Also, the indicated

values may differ slightly from the

actual values and should thus be

treated only as a guide.

& Driving information display

S03BO09

NOTE

You can set the units for both the multi-

function display (black and white) and

the combination meter at the same

time. For details about setting the

language and units, refer to “Type A

combination meter” F3-11 or “Menu

screens” F3-41.

! How to change the information dis-

play

S03BO0910

1) INFO button

Pressing the INFO button on the steering

wheel switches the display in the following

sequence.

– CONTINUED –

Instruments and controls/Multi-function display (black and white)

3-43

(182,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

*1: Models without combination meter display

(color LCD)

*2: If equipped

! Driving range on remaining fuel

S03BO0903

1) When setting the displayed unit as MPH

2) When setting the displayed unit as km/h

The driving range indicates the distance

that can be driven taking into account the

amount of fuel remaining in the tank and

the average rate of fuel consumption.

1) When setting the displayed unit as MPH

2) When setting the displayed unit as km/h

If the driving range is shown as “

”, there

is only a tiny amount of fuel left in the tank.

NOTE

The driving range on remaining fuel is

only a guide. The indicated value may

differ from the actual driving range on

remaining fuel, so you must immedi-

ately fill the tank when the low fuel

warning light illuminates.

Instruments and controls/Multi-function display (black and white)

3-44

(183,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

! Average fuel consumption

S03BO0902

1) Displays the driving range per gallon of

fuel

2) Displays the driving range per liter of fuel

3) Displays the fuel consumption per 100

This display shows the average rate of fuel

consumption since the trip meter was last

reset.

1) TRIP RESET switch

Press the TRIP RESET switch to switch

between the displays for the average fuel

consumption that corresponds to the A trip

meter mileage and the average fuel con-

sumption that corresponds to the B trip

meter mileage.

When the trip meter displays is reset, the

corresponding average fuel consumption

value is also reset.

NOTE

. When the trip meter display is reset,

the average fuel consumption corre-

sponding to that trip meter display is

not shown until the vehicle has subse-

quently covered a distance of 1 mile (or

1 km).

. The units for measuring average fuel

consumption cannot be changed.

! Current fuel consumption

S03BO0901

1) Displays the driving range per gallon of

fuel

2) Displays the driving range per liter of fuel

3) Displays the fuel consumption per 100

This indication shows the rate of fuel

consumption at the present moment.

– CONTINUED –

Instruments and controls/Multi-function display (black and white)

3-45

(184,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

! Journey time (models without com-

bination meter display (color LCD))

S03BO0904

The journey time shows the time that has

elapsed since the ignition switch was

turned to the “ON” position.

The journey time indication flashes each

time a complete hour has elapsed. If the

display is giving a reading other than the

journey time, the display switches to the

journey time, flashes for 5 seconds, and

returns to its original reading each time a

complete hour has elapsed.

NOTE

The journey time is reset when the

ignition switch is turned to the “ACC”

or “LOCK”/“OFF” position.

! Average vehicle speed

S03BO0905

1) When units in miles is selected

2) When units in km is selected

This display shows the average vehicle

speed since the trip meter was last reset.

Pressing the TRIP RESET switch toggles

the display between the average vehicle

speed corresponding to the A trip meter

display and the average vehicle speed

corresponding to the B trip meter display.

When either of the trip meter displays is

reset, the corresponding average vehicle

speed value is also reset.

NOTE

When either trip meter display is reset,

the average vehicle speed correspond-

ing to that trip meter display is not

shown until the vehicle has subse-

quently covered a distance of 1 mile

(or 1 km).

! Auto Start Stop time (if equipped)

S03BO0907

1) Total time in conjunction with the trip

meter

2) Total time in conjunction with the ignition

switch

Instruments and controls/Multi-function display (black and white)

3-46

(185,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

This display shows the total time that the

engine was stopped by the Auto Start Stop

system in the following ways.

Total time in conjunction with the trip

meter: Displays the total time that the

engine was stopped by the Auto Start Stop

system, from the last time the currently

displayed trip meter was reset until the

current time. By pressing the TRIP RESET

switch, you can toggle the display between

the time the engine was stopped for trip A

and the time the engine was stopped for

trip B.

NOTE

When the trip meter mileage is reset,

the total time in conjunction with the

trip meter is not shown until the vehicle

has subsequently covered a distance

of 1 mile (or 1 km).

Total time in conjunction with the igni-

tion switch: Displays the total time that

the engine was stopped by the Auto Start

Stop system, from the time when the

ignition switch was turned to the “ON”

position to the current time.

! How to switch the display

S03BO090701

Perform the following operation to toggle

the display between the total time in

conjunction with the trip meter and the

total time in conjunction with the ignition

switch.

1. Press and hold the “+” button located

on the side of the information display. The

stopped time will then flash.

2. Within 5 seconds after the stopped

time starts flashing, press and hold the “−”

button located on the side of the informa-

tion display. The display will then change

and after flashing for 3 seconds, the

stopped time selected will be displayed.

3. Each time the “−” button is pressed and

held during the 3 seconds that the display

is flashing, the display will change and

flash for 3 seconds. If the “−” button is not

pressed and held during the 3-second

period that the display is flashing, the

stopped time selected will be displayed.

! Turn off display of driving informa-

tion display

S03BO0906

Select the blank space in the menu to exit

the driving information display selection.

NOTE

. The average fuel consumption and

average vehicle speed are calculated

even while the driving information dis-

play has been turned off.

. Even if you turn off the driving

information display, the display will

automatically turn on when the battery

voltage is disconnected and then re-

connected for battery replacement or

fuse replacement.

– CONTINUED –

Instruments and controls/Multi-function display (black and white)

3-47

Multi-function display (black and white) for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals