2022-2026 Subaru XV SUV Remote keyless entry system -> Unlocking the doors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Remote keyless entry system -> Unlocking the doors for Your Subaru XV SUV Third Generation (2022-2026)

(122,1)
北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
Transmitter
1) Lock/arm button
2) Unlock/disarm button
3) Rear gate unlock button
4) PANIC button
The remote keyless entry system has the
following functions.
. Locking and unlocking the doors (and
rear gate)
. Unlocking the rear gate
. Sounding a panic alarm
. Arming and disarming the alarm sys-
tem. For detailed information, refer to
“Alarm system” F2-25.
The operable distance of the remote key-
less entry system is approximately 30 feet
(10 meters). However, this distance will
vary depending on environmental condi-
tions. The system’s operable distance will
be shorter in areas near a facility or
electronic equipment emitting strong radio
waves such as a power plant, broadcast
station, TV tower, or remote controller of
home electronic appliances.
NOTE
. For models with “keyless access
with push-button start system”, the
remote keyless entry system will not
be activated when the push-button
ignition switch is in any position other
than the “OFF” position.
. For models without “keyless access
with push-button start system”, the
remote keyless entry system will not
be activated when the key is inserted in
the ignition switch.
. The hazard warning flashers will
flash once or twice when the access
key fob/transmitter button is pressed in
the following cases.
– When locking the doors
– When unlocking the doors
– When unlocking the rear gate
Operation of the hazard warning
flashers in the above cases can be set
to “On” or “Off” by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
& Locking the doors
S02AQ01
Press the lock/arm button to lock all doors
and rear gate. An electronic chirp will
sound once and the hazard warning
flashers will flash once.
If any of the doors (or the rear gate) are not
fully closed, the following will occur to alert
you that the doors (or the rear gate) are not
properly closed.
. An electronic chirp sounds five times.
. The hazard warning flashers flash five
times.
When you close the door, it will automati-
cally lock and then the following will occur.
. An electronic chirp sounds once.
. The hazard warning flashers flash
once.
& Unlocking the doors
S02AQ02
Press the unlock/disarm button to unlock
the driver’s door. An electronic chirp will
sound twice and the hazard warning
flashers will flash twice. To unlock all doors
and the rear gate, briefly press the unlock/
disarm button a second time within 5
seconds.
NOTE
If the interval between the first and
second presses of the unlock/disarm
Keys and doors/Remote keyless entry system
2-18
(123,1)
北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
button (for unlocking of all of the doors
and the rear gate) is extremely short,
the system may not respond.
& Unlocking the rear gate
S02AQ05
Press the rear gate unlock button to unlock
the rear gate.
An electronic chirp will sound twice and the
hazard warning flashers will flash twice.
& Vehicle finder function
S02AQ07
Use this function to find your vehicle
parked among many vehicles in a large
parking lot. Provided you are within 30 feet
(10 meters) of the vehicle, pressing the
lock/arm button three times in a 5-second
period will cause your vehicle’s horn to
sound once and its hazard warning
flashers to flash three times.
NOTE
If the interval between presses is too
short when you press the lock/arm
button three times, the system may
not respond to the signals from the
remote transmitter.
& Sounding a panic alarm
S02AQ08
To activate the alarm, press the “PANIC”
button once.
The horn will sound and the hazard
warning flashers will flash.
To deactivate the panic alarm, press any
button on the remote transmitter. Unless a
button on the remote transmitter is
pressed, the alarm will be deactivated
after approximately 30 seconds.
& Setting audible signal opera-
tion (models without “keyless
access with push-button start
system”)
S02AQ09
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off.
Perform the following steps to deactivate
the audible signal. You can also use the
same steps to restore the function.
1. Sit in the driver’s seat and shut all
doors and the rear gate.
2. Hold down “ ” of the power door
locking switch.
3. While holding down “
” of the power
door locking switch, pull the key out and re-
insert it into the ignition switch at least 6
times within 10 seconds after Step 2.
4. Open and close the driver’s door once
within 10 seconds after Step 3.
5. The hazard warning flashers flash 3
times to indicate completion of the setting.
Your SUBARU dealer can perform the
above procedure for you. Also, for models
with a combination meter display (color
LCD), the setting can be changed using
the display. For details, refer to “Vehicle
Setting” F3-42.
– CONTINUED –
Keys and doors/Remote keyless entry system
2-19
2

Related Topics

Popular Owner Manuals