Get Wiper and washer -> One-touch lane changer Guide for Subaru XV SUV Third Generation (2022-2026)

(215,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

For Canada models

1) Headlight switch

2) Fog light switch

The front fog lights will turn on when the

fog light switch is placed in the “

” position

while the headlights are in the following

condition.

. The headlight switch is in the “

”

position with the low beam mode selected.

. For models with the auto on/off head-

lights, while the headlight switch is in the

“AUTO” position and the low beam head-

lights turn on automatically.

To turn off the front fog lights, perform the

following.

. Turn the switch to “

” (except for

Canada models).

. Turn the switch to “OFF” (for Canada

models).

Indicator light

The indicator light on the combination

meter will illuminate when the front fog

lights are illuminated.

Turn signal lever

S03AI

1) Right turn

2) Lane change right signal

3) Lane change left signal

4) Left turn

If the lever does not return after cornering,

return the lever to the neutral position by

hand.

To signal a lane change, push the turn

signal lever up or down slightly and hold it

during the lane change. The lever will

return automatically to the neutral position

when you release it.

– CONTINUED –

Instruments and controls/Turn signal lever

3-77

(216,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

& One-touch lane changer

S03AI01

To flash the turn signal and turn signal

indicator light three times, push the turn

signal lever up or down slightly and

immediately release it.

NOTE

The operational/non-operational

setting of the one-touch lane changer

can be changed by a SUBARU dealer.

Contact the nearest SUBARU dealer for

details. For models with the combina-

tion meter display (color LCD), the

setting can also be changed by operat-

ing the combination meter display

(color LCD). For details, refer to “Vehi-

cle Setting” F3-42.

Wiper and washer

S03AM

WARNING

In freezing weather, do not use the

windshield washer until the wind-

shield is sufficiently warmed by the

defroster.

Otherwise the washer fluid can

freeze on the windshield, blocking

your view.

CAUTION

. Do not operate the washer con-

tinuously for more than 10 sec-

onds, or when the washer fluid

tank is empty. This may cause

overheating of the washer motor.

Check the washer fluid level fre-

quently, such as at fuel stops.

. Do not operate the wipers when

the windshield or rear window is

dry. This may scratch the glass,

damage the blade rubbers and

might cause the wiper motor to

fail. Before operating the wiper

on a dry windshield or rear win-

dow, always use the windshield

washer.

. In freezing weather, be sure that

the blade rubbers are not frozen

to the windshield or rear window

before switching on the wipers.

Attempting to operate the wiper

with the blades frozen to the

window glass could cause not

only the blade rubbers to be

damaged but also might cause

the wiper motor to fail. If the blade

rubbers are frozen to the window

glass, be sure to operate the

defroster, windshield wiper dei-

cer (if equipped) or rear window

defogger before turning on the

wiper.

. If the wipers stop during opera-

tion because of ice or some other

obstruction on the window, this

might cause the wiper motor to

fail even if the wiper switch is

turned off. If this occurs,

promptly stop the vehicle in a

safe place, turn the ignition

switch to the “LOCK”/“OFF” po-

sition and clean the window glass

to allow proper wiper operation.

. Use clean water if windshield

washer fluid is unavailable. In

areas where water freezes in

winter, use SUBARU Windshield

Washer Fluid or the equivalent.

Instruments and controls/Wiper and washer

3-78

Wiper and washer -> One-touch lane changer for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals