Get Other Controls and Equipment -> High Mount Stop Lamp Guide for Suzuki Alto 4 Door Sixth Generation (2004-2008)

76G-74E

6-9

OTHER CONTROLS AND EQUIPMENT

76G-06-022

76G-06-023

The jack should be used only to

change wheels. It is important to read

the jacking instructions in the

EMERGENCY SERVICE section of this

manual before attempting to use the

jack.

After using the jack crank and wheel

wrench, be sure to stow them

securely or they can cause injury if an

accident occurs.

w WARNING

HIGH MOUNT STOP LAMP

76G-06-024 76G-06-025

ALTO

76G-06-025A

ALTO K10

76G-74E

6-10

OTHER CONTROLS AND EQUIPMENT

High mount stop lamp is provided with your

vehicle and is fitted on back door. The stop

lamp will glow as when the brake pedal will

be depressed.

To change the bulb of the stop lamp,

remove the clips at both sides of the cover,

by pressing the inner pin inside so that the

clip gets loose and remove the bulb on

turning it anticlockwise.

There is one bulb in high mount stop lamp.

Other Controls and Equipment -> High Mount Stop Lamp for Your Suzuki Alto 4 Door Sixth Generation (2004-2008)