Get Operating Your Vehicle -> Speed limiter (if equipped) Guide for Suzuki Baleno 4 Door First Generation (1995-2002)

3-53

OPERATING YOUR VEHICLE

68PM2-01E

To resume the previously set speed, push

“RES +” switch (3) and show “SET” indica-

tor (6). The vehicle speed must be above

40 km/h (25 mph) when the vehicle is not

under the above conditions.

To turn off the cruise control system, push

“CRUISE” switch (1) and check that the

cruise control indicator (5) disappears.

Also, if the malfunction indicator light in the

instrument cluster comes on or blinks, the

cruise control system will be turned off.

NOTE:

If you turn off the cruise control system, the

previously set speed in the memory is

cleared. Reset your cruising speed again.

Speed limiter (if equipped)

The speed limiter allows you to choose a

maximum speed that you do not wish to

exceed.

Setting maximum speed

Speed limiter switch

54P000364

(1) “LIMIT” switch

(2) “CANCEL” switch

(3) “RES +” switch

(4) “SET –” switch

Information display

(For instrument cluster - Type B)

68PM00334

(5) Limit indicator

(6) “SET” indicator

(7) Speed indication

(3)

(4)

(1)

(2)

(5)

(6)

(7)

EXAMPLE

3-54

OPERATING YOUR VEHICLE

68PM2-01E

(For instrument cluster - Type C)

68PM00335

(5) Limit indicator

(6) “SET” indicator

(7) Speed indication

1) Turn on the speed limiter system by

pushing “LIMIT” switch (1). When the

limit indicator (5) come on or appear on

the information display, you can set the

maximum speed.

2) Accelerate or decelerate to the desired

speed.

3) Push “SET –” switch (4), “SET” indica-

tor (6) come on or appear on the infor-

mation display. The current vehicle

speed is set as the maximum speed.

NOTE:

If you push “SET –” switch (4) when the vehi-

cle speed is less than 30 km/h or 20 mph,

the maximum speed will be set to 30 km/h or

20 mph.

Exceeding maximum speed

You can exceed the maximum speed tem-

porarily by quickly depressing the acceler-

ator pedal all the way down. While the

vehicle speed is exceeded, the speed indi-

cation (7) on the information display will

flash and the buzzer will sound briefly.

If the accelerator pedal is released to

return below the maximum speed, the

speed indication (7) will stop flashing and

then stay lit, and the function will restore.

NOTE:

• When you depress the accelerator pedal

slowly, the vehicle speed may not

exceed the maximum speed. If you wish

to exceed the maximum speed, depress

the accelerator pedal all the way down

quickly or push “CANCEL” switch (2) to

cancel the maximum speed temporarily.

• The speed indication (7) will also flash

and the buzzer will sound if the speed

limiter cannot prevent the vehicle from

exceeding the maximum speed in such

cases as when going down a steep hill,

or under excessive acceleration. In this

case, decelerate to return below the

maximum speed using the brake pedal.

(6) (7)(5)

EXAMPLE

3-55

OPERATING YOUR VEHICLE

68PM2-01E

Changing speed setting

Setting to the current speed

1) Push “CANCEL” switch (2).

2) Accelerate or decelerate to the desired

speed.

3) Push “SET –” switch (4), “SET” indica-

tor (6) come on or appear on the infor-

mation display. The current vehicle

speed is set as the maximum speed.

Using “RES +” switch or “SET –” switch

To change to a faster speed, press repeat-

edly or hold push “RES +” switch (3).

To change to a slower speed, press

repeatedly or hold push “SET –” switch

(4).

NOTE:

• You can adjust the set speed by 1 km/h

(or 1 mph) by pushing “RES +” switch (3)

or “SET –” switch (4) quickly.

• You can adjust the set speed by 5 km/h

(or 5 mph) by pushing and holding “RES

+” switch (3) or “SET –” switch (4).

• If the current vehicle speed exceeds the

maximum speed when changing to the

slower speed using “RES +” switch (3) or

“SET –” switch (4), the speed indication

(7) will flash and the buzzer will sound.

Cancelling speed limiter

• To cancel the speed limiter, push “CAN-

CEL” switch (2). The set indicator (6) will

disappear.

• To resume the previously set speed,

push “RES +” switch (3) and show “SET”

indicator (6).

To turn off the speed limiter system, push

“LIMIT” switch (1) and check that limit indi-

cator (5) disappears.

Also, you can turn off the speed limiter by

turning off the engine.

NOTE:

If you turn off the speed limiter system, the

previously set speed in the memory is

cleared. Set your speed again.

Radar brake support system

(if equipped)

Radar brake support system measures the

relative velocity of, and distance from, the

vehicle in front of you by radar and then

attempts to avoid a crash by giving warn-

ing and, in the event of a crash, attempts to

reduce damage through brake control.

WARNING

• Radar brake support system has

limits and may not function prop-

erly depending on the driving con-

ditions. Do not rely excessively on

the system and always drive in a

safe manner.

• For safety reasons, do not check

the operation of the system by

yourself.

• Check that all passengers fasten

their seat belts when the vehicle is

being operated.

When the system is activated, there

is a risk of serious injury from

being thrown.

(Continued)

Operating Your Vehicle -> Speed limiter (if equipped) for Your Suzuki Baleno 4 Door First Generation (1995-2002)

Related Topics

Popular Owner Manuals

Latest Owner Manuals