1995-2002 Suzuki Baleno 4 Door Other Controls and Equipment -> Heating system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Other Controls and Equipment -> Heating system for Your Suzuki Baleno 4 Door First Generation (1995-2002)

5-20
OTHER CONTROLS AND EQUIPMENT
68PM2-01E
Heating system
Description of controls
68PM00532
Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blower speed by turning the selec-
tor.
Air flow selector (3)
68PM00533
This is used to select one of the following
functions.
VENTILATION (a)
68PM00534
Temperature-controlled air comes out of
the center and side air outlets.
(1) (2)
(3)
(4)
(a)
(b)
(c)
(d)
(e)
5-21
OTHER CONTROLS AND EQUIPMENT
68PM2-01E
BI-LEVEL (b)
68PM00535
Temperature-controlled air comes out of
the floor outlets and cooler air comes out
of the center and side outlets. When the
temperature selector (1) is in the fully cold
position or fully hot position, however, the
air from the floor outlets and the air from
the center and side outlets will be the
same temperature.
HEAT (c)
68PM00536
Temperature-controlled air comes out of
the floor outlets and the side outlets, also
comes out of the windshield defroster out-
lets and also comes slightly out of the side
defroster outlets.
HEAT & DEFROST (d)
68PM00537
Temperature-controlled air comes out of
the floor outlets, the windshield defroster
outlets, the side defroster outlets and the
side outlets.
5-22
OTHER CONTROLS AND EQUIPMENT
68PM2-01E
DEFROST (e)
68PM00538
Temperature-controlled air comes out of
the windshield defroster outlets, the side
defroster outlets and the side outlets.
Air intake selector (4)
68PH00548
This selector is used to select the following
modes.
FRESH AIR (f)
When this mode is selected, the indicator
light will go off and outside air is used.
RECIRCULATED AIR (g)
When this mode is selected, the indicator
light will come on, outside air is shut out
and inside air is recirculated. This mode is
suitable when driving through dusty or pol-
luted air such as in a tunnel, or when
attempting to quickly cool down the inte-
rior.
FRESH AIR and RECIRCULATED AIR are
switched alternately each time the air
intake selector is pushed.
NOTE:
If you select RECIRCULATED AIR for an
extended period of time, the air in the vehi-
cle can become contaminated. Therefore,
you should occasionally select FRESH
AIR.
System operating instructions
Natural ventilation
Select VENTILATION and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to off. Fresh air will flow through
the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
than off.
Normal heating (using outside air)
Select HEAT and FRESH AIR, the tem-
perature selector to the desired tempera-
ture position and the blower speed selector
to the desired blower speed position. Set-
ting the blower speed selector to a higher
blower speed position increases heating
efficiency.
Quick heating (using recirculated air)
The control settings are the same as for
normal heating except you select RECIR-
CULATED AIR. If you use this heating
method for an extended period of time, the
air in the vehicle can become contami-
nated and the windows can become misty.
Therefore, use this method only for quick
heating and change to the normal heating
method as soon as possible.
(f) (g)
5-23
OTHER CONTROLS AND EQUIPMENT
68PM2-01E
Head cooled/Feet warmed heating
Select BI-LEVEL and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully cold position or fully hot position,
the air that comes out of the center and
side outlets will be cooler than the air that
comes out of the floor outlets.
Defrosting/Feet warmed heating
Select HEAT & DEFROST and FRESH
AIR, the temperature selector to the
desired temperature position, and the
blower speed selector to high. When the
windshield has become clear, set the
blower speed selector to the desired
blower speed position.
Defrosting
Select DEFROST and FRESH AIR, the
temperature selector to the desired tem-
perature position (higher temperature pro-
vides more efficient defrosting), and the
blower speed selector to high. When the
windshield has become clear, set the
blower speed selector to the desired
blower speed position.
68PM00539
NOTE:
If you need maximum defrosting, adjust
the temperature selector to hot end and
adjust the side outlets so the air blows on
the side window, in addition to the above
Defrosting procedure.
Manual heating and air
conditioning system
Description of controls
68PM00540
Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blower speed by turning the selec-
tor.
EXAMPLE
(1) (2)
(3)
(4) (5)

Related Topics

Other Controls and Equipment
Fuel filler cap Engine hood Sun visor Interior light Accessory socket AUX/USB socket (if equipped) Assist grips Glove box Cup holder and storage area Footrest Floor mats (if equipped) Luggage compartment hooks Luggage compartment cover (if equipped) Luggage compartment board (if equipped) Luggage compartment carpet Roof rack anchors Frame hooks Heating and air conditioning system Manual heating and air conditioning system Automatic heating and air conditioning system (climate control) Radio antenna Installation of radio frequency transmitters Audio system (Type A / Type B) (if equipped)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot