Get Other Controls and Equipment -> Audio Systems (type B) Guide for Suzuki Grand Vitara SUV Second Generation (2005-2015)

5-36

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Audio Systems (type B)

AM/FM/XM CD PLAYER

WITH CD CHANGER CONTROL

(Built-in CD Player)

79KA001

Precautions

• When the inside of the car is very cold

and the player is used soon after switch-

ing on the heater, moisture may form on

the disc or the optical parts of the player

and proper playback may not be possi-

ble. If moisture forms on the disc, wipe it

off with a soft cloth. If moisture forms on

the optical parts of the player, do not use

the player for about one hour. This will

allow the condensation to disappear nor-

mally.

• Driving on extremely bumpy roads which

cause severe vibrations may cause

sound to skip.

• This unit uses a precision mechanism.

Even in the event that trouble arises,

never open the case, disassemble the

unit, or lubricate the rotating parts.

Please bring the unit to an authorized

SUZUKI dealer or a Clarion service

Department.

Cautions on Handling

52D274

This unit has been designed specifically for

playback of compact discs bearing the

mark (A).

No other discs can be played.

52D275

To remove the compact disc from its stor-

age case, press down on the center of the

case and lift the disc out, holding it care-

fully by the edges.

Always handle the compact disc by the

edges.

(A)

Removing the disc Proper way to hold

the compact disc

5-37

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Never touch the surface.

52D347

To remove fingermarks and dust, use a

soft cloth, and wipe in a straight line from

the center of the compact disc to the cir-

cumference.

52D277

New discs may have some roughness

around the edges. The unit may not work

or the sound may skip if such discs are

used. Use a ball-point pen (B), etc. to

remove the roughness (C) from edges of

the disc before insertion inside the unit.

52D348

Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

52D349

Do not use any solvents such as commer-

cially available cleaners, anti-static spray,

or thinner to clean compact discs.

52D350

Do not use compact discs that have large

scratches, are misshaped, or cracked, etc.

Use of such discs will cause damage or

prevent the system from operating prop-

erly.

52D351

Do not expose compact discs to direct sun-

light or any heat source.

NOTE:

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc.

These may get caught in the internal

mechanism and damage the disc.

• CD-R discs may not be able to playback

in this unit due to the recording condi-

tions.

• CD-RW discs cannot playback in this

unit.

(B)

(C)

5-38

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Basic Operations

79KA002

(1) (2)

(5)

(6)

(3)

(4)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

79K086

(1) Power on/off knob

Volume control knob

(2) Tone/balance/fader control knob

(3) Preset button 5

(4) Preset button 6

(5) Clock button H

(6) Clock button M

(A) Clock display

(A)

5-39

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Turning power on/off

Press the power on/off knob (1).

The unit starts in the function mode it was

in when the power was turned off last.

Adjusting the volume

Turn the volume control knob (1).

Turning it clockwise increases the volume;

turning it counterclockwise decreases the

volume.

NOTE:

While driving, adjust the volume to an

extent that sound and/or noise coming

from outside the car can be heard.

Adjusting the clock

1) Press the clock button H (5) to adjust

the hours.

Press the clock button M (6) to adjust

the minutes.

2) Hold the button depressed to automati-

cally increment the number.

3) To reset the clock to an hour signal,

press the clock button H (5) while hold-

ing the clock button M (6) depressed.

NOTE:

When the clock has not been set, the time

“12:00” will flash in the display.

Clock reset is effected as follows:

• When minutes are between 00 and 29,

the clock will reset to the current hour.

(example: 12:23 ➔ 12:00)

• When minutes are between 30 and 59,

the clock will reset to the next hour.

(example: 12:38 ➔ 1:00)

Adjusting bass/treble/balance/fader

1) Press the tone/balance/fader control

knob (2).

Each time it is pressed, sound adjust-

ment is changed as follows:

66J224

2) Turn the tone/balance/fader control

knob (2) to adjust the sound.

Adjusting the AVC (Auto volume con-

trol)

The Auto Volume Control (AVC) function

automatically adjusts (increases/

decreases) the sound volume in accor-

dance with vehicle speed. The AVC control

is provided with three selectable levels

(LEVEL OFF, 1, 2, 3). The range of volume

adjustment increases together with the

LEVEL number,

1) Press the tone/balance/fader control

knob (2) until the AVC adjustment mode

is selected.

2) Turn the tone/balance/fader control

knob (2) to select the desired AVC

adjustment level. (Initial setting: LEVEL

Adjusting the contrast of the display

1) Press the tone/balance/fader control

knob (2) and preset button 5 (3), preset

button 6 (4) simultaneously.

2) To adjust the contrast of the display,

turn the power on/off knob (1).

Bass adjustment (BASS 0)

Treble adjustment (TREBLE 0)

Balance adjustment (BALANCE 0)

Fader adjustment (FADER 0)

AVC adjustment (AVC LEVEL 2)

Original mode

5-40

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to the Radio

79KA003

(1)

(4)

(6)

(2)

(3)

(5)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

66J097

(1) Band switch button (FM/AM)

(2) Seek up button

(3) Seek down button

(4) Manual tuning knob

(5) Preset buttons (1 to 6)

(6) Auto store button (AS)/

Scan button (SCAN)

(A) Band

(B) Preset channel number

(D) Frequency

(A)

(B)

(C)

(D)

5-41

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Selecting the reception band

Press the band switch button (1).

Each time the button is pressed, the recep-

tion band is switched as follows:

66J098

Seek tuning

Press the seek up button (2) or the seek

down button (3).

The unit stops searching for a station at a

frequency where a broadcast station is

available.

Manual tuning

Turn the manual tuning knob (4).

The frequency being received is displayed.

Preset memory

1) Select the desired station.

2) Select the preset button (5) to which

you want to store the station and press

and hold the button for 2 seconds or

longer.

Auto store

Press and hold the auto store button (6) for

2 seconds or longer.

Six stations in total are automatically

stored to the preset buttons (5) in sequen-

tial order, starting from the lower frequen-

cies.

NOTE:

• When the auto store is performed, the

station previously stored in the memory

at the position is overwritten.

• When there are fewer than 6 stations

that can be stored even if 2 rounds of

auto store operation are performed, the

stations previously stored at the remain-

ing preset buttons (5) are not overwrit-

ten.

Scan tuning

1) Press the scan button (6).

Stations are automatically sought for in

a sequential order, starting from a sta-

tion being currently received, and scan

stops for 5 seconds at a frequency

where there is a station available.

2) Press the scan button (6) again to stop

scanning at the frequency being cur-

rently received.

Receiving a stereo broadcast station

If a stereo broadcast station is received,

the stereo indicator will light.

5-42

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Radio Reception

Radio reception can be affected by envi-

ronment, atmospheric conditions, or radio

signal’s power and distance from the sta-

tion. Nearby mountains and buildings may

interfere or deflect radio reception, causing

poor reception. Poor reception or radio

static can also be caused by electric cur-

rent from overhead wires or high voltage

power lines.

Listening to a CD

52D274

• CDs or CD-ROMs carrying no mark (A)

cannot be used.

• Some discs previously recorded in CD-

R\CD-RW format may not be used.

52D291

• A CD is inserted with its label facing

upward.

• When there is a CD already loaded in

the unit, another CD cannot be loaded at

the same time. Do not use force when

inserting the CD into the CD insertion

slot.

• If a blank disc (non-recorded CD-R) is

loaded in the unit, the disc will be

ejected.

(A)

CAUTION

• Never insert your finger or hand

into the CD insertion slot. Never

insert foreign objects.

• Never insert a CD with glue coming

out from adhesive tape or a rental

CD label or with a trace indicating

that adhesive tape or a rental CD

label has been removed. This may

cause the CD not to eject or result

in a malfunction.

5-43

OTHER CONTROLS AND EQUIPMENT

79K21-03E

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

79KA004

(3)

(6)

(4)

(2)

(1)

(5)

Display

66J100

(1) CD insertion slot

(2) CD eject button

(3) Disc button (CD/AUX)

(4) Track up button/Fast forward button

(5) Track down button/Rewind button

(6) Repeat button (RPT)

(A) Mode indicator

(B) Track number

(D) Repeat indicator

NOTE:

About Single CDs (8 cm CDs)

• No adapter is required to play a single

CD.

• A single CD is inserted from the center

of the CD insertion slot.

• Since an ejected single CD is not auto-

matically reloaded, be sure to remove

the ejected single CD.

(A)

(B)

(C)

(D)

5-44

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Loading a CD

Insert a CD in the CD insertion slot (1).

When a CD is loaded, play starts and the

CD indicator (A) lights.

Ejecting a CD

Press the CD eject button (2).

If you left a CD ejected for a period of

about 15 seconds, it will be automatically

drawn inside the unit. (Auto reload func-

tion)

The backup eject function:

This function allows you to eject a CD with

the power turned off by pressing the CD

eject button (2).

Listening to a CD

When a CD is inserted, it is automatically

played back.

When a CD is already inside the unit,

press the disc button (3) to play back the

CD. When a CD is inside the unit, the CD

indicator (A) is lit on the display unit.

Selecting a track

• Press the track up button (4) to listen to

the next track.

• Press the track down button (5) twice to

listen to the previous track.

When the track down button (5) is

pressed once, the track being currently

played will return to the beginning.

Fast forwarding/Rewinding a track

• Hold in the fast forward button (4) to

advance a track rapidly.

• Hold in the rewind button (5) to rewind a

track.

Repeat play

Press the repeat button (6).

Each time the button is pressed, repeat

play mode changes as follows:

64J287

NOTE:

This operation should be performed within

2 seconds.

To cancel repeat play, press the repeat but-

ton (6) to change the repeat play mode to

OFF.

• TRACK REPEAT

The indication “TRACK RPT” appears in

the display for 2 seconds and then the

repeat indicator (D) lights.

The track currently being played is

played repeatedly.

CAUTION

If you forcefully try to push an ejected

CD inside the unit before auto reload-

ing, the disc surface might be

scratched.

TRACK REPEAT

OFF

5-45

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to an MP3/WMA Disc

79KA005

(1)

(2)

(3)

(4)

(5)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

66J104

(1) Sound control knob

(2) Repeat button (RPT)

(3) Track up button/Fast forward button

(4) Track down button/Rewind button

(5) Display button (DISP)

(A) Folder number

(B) Track number

(D) Repeat indicator

(E) WMA indicator

(F) MP3 indicator

(A)

(B)

(E) (D)

(C)

(F)

5-46

OTHER CONTROLS AND EQUIPMENT

79K21-03E

What is MP3/WMA?

MP3 (MPEG1/2 Audio Layer-III) and WMA

(Windows Media

Audio) are the com-

pression formats of digital audio. The

former is developed by MPEG (Motion Pic-

ture Experts Group), and the latter is

developed by Microsoft Corporation. Using

these compression formats, you can

record the contents of about 10 music CDs

on a single CD media (This figures refer to

data recorded on a 650 MB CD-R or CD-

RW at a fixed bit rate of 128 kbps and a

sampling frequency of 44.1 kHz).

Points to remember when making MP3/

WMA files

Common

• High bit rate and high sampling fre-

quency are recommended for high qual-

ity sounds.

• Selecting VBR (Variable Bit Rate) is not

recommended because playing time is

not displayed properly and sound may

be skipped.

• The playback sound quality differs

depending on the encoding circum-

stances. For details, refer to the user

manual of your own encoding software

and writing software.

MP3

• It is recommended to set the bit rate to

“128 kbps or more” and “fixed”.

WMA

• It is recommended to set the bit rate to

“64 kbps or more” and “fixed”.

• Do not set the copy protect attribute on

the WMA file to enable this unit to play

back.

NOTE:

Never assign the “.mp3”, or “.wma” file

name extension to a file that is not in the

MP3/WMA format. This may not only pro-

duce noise from the speaker damage, but

also damage your hearing.

Recording MP3/WMA files on a CD-

media

• You are recommended to minimize the

chances of making a disc that contains

both CD-DA files and MP3/WMA files.

• If CD-DA files are on the same disc as

MP3 or WMA files, the songs may not

play in the intended order, or some

songs may not play at all.

• When storing MP3 data and WMA data

on the same disc, use different folders

for each data.

• Do not record files other than MP3/WMA

files and unnecessary folder on a disc.

• The name of an MP3/WMA file should

be added by rules as shown in the fol-

lowing descriptions and also comply with

the rules of each file system.

• The file extension “.mp3” or “.wma”

should be assigned to each file depend-

ing on the file format.

• You may encounter trouble in playing

MP3/WMA files or displaying the infor-

mation of MP3/WMA files recorded with

certain writing software or CD recorders.

• This unit does not have a play list func-

tion.

• Although Multi-session recording is sup-

ported, the use of Disc-at-Once is rec-

ommended.

5-47

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Compression formats

MP3

• Bit rate

MPEG1 Audio Layer III : 32 k - 320 kbps

MPEG2 Audio Layer III : 8 k - 160 kbps

• Sampling frequency

MPEG1 Audio Layer III : 44.1 k/48 k/32

kHz

MPEG2 Audio Layer III : 22.05 k/24 k/16

kHz

WMA (Ver.7, Ver.8, Ver.9*)

• Bit rate

32 k - 192 kbps

• Sampling frequency

44.1 k/48 k/32 kHz

* WMA 9 Professional/LossLess/Voice are

not supported.

Supported file systems

ISO 9660 Level 1/Level 2, Apple Extension

to ISO 9660, Joliet, Romeo

Maximum number of files/folders

• Maximum number of files:

999(files + folders)

• Maximum number of files in one folder:

255

• Maximum depth of trees: 8

• Maximum number of folders: 255

(Root folder is included.)

MP3/WMA MODE

Selecting a folder

Turn the sound control knob (1) to select a

folder.

Repeat play

Press the repeat button (2).

Each time the button is pressed, repeat

play mode changes as follows:

66J128

TRACK REPEAT

FOLDER REPEAT

OFF

5-48

OTHER CONTROLS AND EQUIPMENT

79K21-03E

NOTE:

This operation should be performed within

2 seconds.

To cancel repeat play, press the repeat but-

ton (2) several times to change the repeat

play mode to OFF.

• TRACK REPEAT

The indication “TRACK RPT” appears in

the display for 2 seconds and then the

repeat indicator (D) lights.

The track currently being played is

played repeatedly.

• FOLDER REPEAT

The indication “FOLDER RPT” appears

in the display for 2 seconds and then the

repeat indicator (D) lights.

All the tracks in the folder currently being

played are played repeatedly.

Selecting a track

• Press the track up button (3) to listen to

the next track.

• Press the track down button (4) twice to

listen to the previous track.

When the track down button (4) is

pressed once, the track currently being

played will start again at the beginning.

Fast forwarding/Rewinding a track

• Hold in the fast forward button (3) to

advance a track rapidly.

• Hold in the rewind button (4) to rewind a

track.

Displaying CD titles

Press the display button (5).

Each time the button is pressed, the title

changes as follows:

66J146

Forwarding a title

If there is a title with 12 letters or more,

each press will show next letters in the dis-

play. (No scrolling is made.)

Press and hold the display button (5) for 2

seconds or longer. A title is changed.

TRACK TITLE

FOLDER TITLE

ARTIST TITLE

OFF

FILE TITLEALBUM TITLE

5-49

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to Audio for AUX

79KA006

(1)

(2)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

80JA007

(1) Aux button (CD/AUX)

(2) Aux input connector

(A) Mode indicator

(A)

5-50

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Aux function

This system has an external input terminal

so you can listen to audio from an external

device connected to this unit.

Press the aux button (1).

Each time the button is pressed, the

selected mode is switched as follows:

80JA008

NOTE:

• AUX1 is displayed when an external

component is connected to the front-

panel AUX input connector.

• Use a stereo 3.5 mm miniplug cord to

connect external components to the

AUX input connector.

CD AUX1

CAUTION

• Do not attempt to connect or oper-

ate an external component while

engaged in driving.

• Do not allow the cord to interfere

with the driver’s actions.

• If an external component is con-

nected when its audio volume has

been set to a high level, a loud

sound volume may suddenly be

produced.

5-51

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to a XM Satellite Radio (Option)

79KA007

(5)

(2)

(8)

(6)

(3)

(4)

(7)

(1)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

66J107

(1) XM button

(2) Category button (CAT)

(3) Seek up button

(4) Seek down button

(5) Manual tuning knob

(6) Display button (DISP)

(7) Preset button (1 to 6)

(8) Scan button (SCAN)

(A) Band

(B) Channel number

If you want to purchase XM Satellite Radio

Service, contact your SUZUKI dealer.

It is necessary to buy a special tuner to

receive XM broadcasting.

Your vehicle is capable of receiving XM

Satellite Radio anywhere in the United

States except Hawaii, Alaska, and Can-

ada.

(A)

(B)

(C)

5-52

OTHER CONTROLS AND EQUIPMENT

79K21-03E

XM MODE

Selecting a band

Press the XM button (1).

Each time the button is pressed, the band

changes in the following order.

66J129

Selecting a category

Press the seek up button (3) or the seek

down button (4). The category is changed.

Turning the category function on/off

Press and hold the category button (2) for

2 seconds or longer, and “CATEGORY

ON” appears on the display, the CAT indi-

cator (C) lights up and the CATEGORY

function is activated.

Press and hold the category button (2) for

2 seconds or longer again, and “CATE-

GORY OFF” appears on the display and

the CAT indicator (C) turns off, indicating

that the CATEGORY function has been

turned off.

NOTE:

The first time you use the radio, turn the

category function on.

Selecting a category

Press the seek up button (3) or seek down

button (4) to select a category.

Displaying the category

Press the category button (2) to have the

currently selected category appear on the

display.

Selecting a channel

Turn the manual tuning knob (5) to select a

channel.

NOTE:

When the category function is on, only

those channels included in the selected

category can be selected.

Selecting the item to be displayed

Press the display button (6).

Each time the button is pressed, the item

on display changes in the following order.

66J130

Preset memory

1) Select the desired station.

2) Select the preset button (7) to which

you want to store the station and press

and hold the button for 2 seconds or

longer.

Scan tuning

1) Press the scan button (8).

Stations are automatically searched for

in a sequential order, starting from the

station being currently received, and

scan tuning stops for 5 seconds at the

frequency where there is a station avail-

able.

2) Press the scan button (8) again to stop

scanning at the frequency currently

being received.

Satellite Radio Reception

Satellite radio receives signals from two

satellites in orbit over the equator. There-

fore, satellite radio reception can be inter-

rupted when there are objects south of

your vehicle. To help compensate for this,

ground-based repeaters are placed in

major metropolitan areas, but depending

on the geographic situation (for example, if

mountains or buildings are on the south

side of your vehicle), you may experience

reception problems.

XM1 XM2 XM3

CH NUMBER CH NAME

NAMETITLE

5-53

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to Audio for AUX (Option)

79KA008

(1)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

80JA011

(1) Aux button (CD/AUX)

(A) Mode indicator

Aux function

This system has an external input terminal

so you can listen to audio from an external

device connected to this unit.

Press the aux button (1).

Each time the button is pressed, the

selected mode is switched as follows:

80JA012

NOTE:

• AUX2 is displayed when an external

component is connected to the AUX

(Option) input connector.

• Use a stereo 3.5 mm miniplug cord to

connect external components to the

AUX input connector.

(A)

CD AUX2

5-54

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Listening to a CD from an External CD Changer (Option)

79KA009

(6)

(5)

(1)

(3)

(4)

(2)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

Display

66J113

(1) Disc button (CD/AUX)

(2) Disc select buttons (1 to 6)

(3) Track up button/Fast forward button

(4) Track down button/Rewind button

(5) Repeat button (RPT)

(6) Category button (CAT)

(A) Mode indicator

(B) Disc number

(D) Play time

(E) Repeat indicator

(F) Random indicator

(G) CD changer number

(A)

(B)

(E)

(D)

(F)

(C)

(G)

5-55

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Selecting a CD changer mode

Press the disc button (1).

Each time the button is pressed, the

selected CD plays as follows:

52D300

• When only one CD changer is con-

nected to this unit, CD changer 2 is

skipped.

• When no CD is loaded in the built-in CD

player, the built-in CD player is skipped.

Selecting a disc

Press the disc select button (2) corre-

sponding to the disc number you want to

listen to.

Play starts from the first track on the disc. If

a disc number having no disc is pressed,

the selection will be invalid.

Selecting a track

• Press the track up button (3) to listen to

the next track.

• Press the track down button (4) twice to

listen to the previous track.

When the track down button (4) is

pressed once, the track currently being

played will start again at the beginning.

Fast forwarding/Rewinding a track

• Hold in the fast forward button (3) to

advance a track rapidly.

• Hold in the rewind button (4) to rewind a

track.

Random play

Press the category button (6).

Each time the button is pressed, the mode

changes in the following order.

66J131

NOTE:

This operation should be performed within

2 seconds.

To cancel random play, press the category

button (6) several times to change the ran-

dom play mode to OFF.

• TRACK RANDOM

The tracks in the disc that is loaded are

played at random.

• DISC RANDOM

The tracks in all discs are played at ran-

dom.

NOTE:

The random play can be operated with the

External CD Changer (Option) only.

Repeat play

Press the repeat button (5).

Each time the button is pressed, repeat

play mode changes as follows:

66J144

NOTE:

This operation should be performed within

2 seconds.

To cancel repeat play, press the repeat but-

ton (5) several times to change the repeat

play mode to OFF.

Built-in CD player

CD changer 1

CD changer 2

TRACK RANDOM

DISC RANDOM

OFF

TRACK REPEAT

DISC REPEAT

OFF

5-56

OTHER CONTROLS AND EQUIPMENT

79K21-03E

• TRACK REPEAT

The indication “TRACK RPT” appears in

the display for 2 seconds and then the

repeat indicator (E) lights.

The track being currently played is

played repeatedly.

• DISC REPEAT

The indication “DISC RPT” appears in

the display for 2 seconds and then the

repeat indicator (E) lights.

When all the tracks on a disc being cur-

rently played finish playing, play starts

again at the beginning of the disc.

Remote Audio Controls

(if equipped)

79K052

You can control basic functions of the

audio system with the switches on the

steering wheel.

To control the volume:

• To increase the volume, push the upper

part of the switch (1). The volume contin-

ues to increase until you release the

switch.

• To decrease the volume, push the lower

part of the switch (1). The volume contin-

ues to decrease until you release the

switch.

• To mute, push the switch (2).

To select the mode (AM1, AM2, FM1, FM2,

XM (option), CD, AUX1, External CD-

changer (option), AUX2 (option)), push the

switch (3).

You can also turn on the audio system by

pushing the switch (3).

To change the radio station:

• To advance to the next preset station,

push the upper part of the switch (4)

briefly.

• To select the previous preset station,

push the lower part of the switch (4)

briefly.

• To scan to a higher frequency radio sta-

tion, push and hold the upper part of the

switch (4).

• To scan to a lower frequency radio sta-

tion, push and hold the lower part of the

switch (4).

(1)

(2)

(4)

(3)

5-57

OTHER CONTROLS AND EQUIPMENT

79K21-03E

To change the selection on a CD:

• To advance to the next track on a CD,

push the upper part of the switch (4)

briefly.

• To select the previous track on a CD,

push the lower part of the switch (4).

Anti-Theft Feature

79KA010

(1)

(2)

(3)

AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Player)

5-58

OTHER CONTROLS AND EQUIPMENT

79K21-03E

(1) Power on/off knob

(2) Track up button/Fast forward button

(3) Preset buttons (1 to 6)

The anti-theft feature is intended to dis-

courage theft or the audio system by pre-

venting the system from operating when it

is moved to a different vehicle.

This feature works by allowing you to enter

a Personal Identification Number (PIN).

When the audio system is disconnected

from its power source, such as when the

audio system is removed or the battery is

disconnected, the system will not operate

again unless the PIN is reentered.

Setting the Anti-Theft Function

1) Turn off the power by pressing the

power on/off knob (1).

66J118

2) Press the power on/off knob (1) while

pressing and holding the track up but-

ton (2). The “ENTRY 0000” will blink

and the audio system enter PIN-input

mode.

NOTE:

Establish your PIN by combining numbers

from 1 to 6 into any 4-digit number. If you

forget your PIN, when you remove the bat-

tery for repair etc., you will no longer be

able to operate the audio system.

66J117

3) Input the four digit PIN using preset but-

tons 1 to 6.

66J118

4) After you enter your four digit PIN, the

display will return to “0000”.

66J117

5) Input the same 4-digit number you pre-

viously entered.

66J120

6) The power of the audio system will turn

off.

NOTE:

Write down your PIN for the future use.

Canceling Your Established PIN

Setting

This operation is to be done when you

want to cancel the anti-theft function or

change your PIN.

1) Turn off the power by pressing the

power on/off knob (1).

EXAMPLE

5-59

OTHER CONTROLS AND EQUIPMENT

79K21-03E

66J121

2) Press the power on/off knob (1) while

pressing and holding the track up but-

ton (2). The “DELETE 0000” will blink

and the audio system will enter the can-

cel mode.

66J124

3) Input your PIN. The power of the audio

system will turn off and your PIN will be

deleted.

To change your PIN, first delete your

current PIN, then set a new one.

Confirming Your Personal Identifi-

cation Number (PIN)

When the main power source is discon-

nected such as when you exchange your

battery, etc, you will have to confirm your

PIN to be able to use the audio system.

To confirm your PIN:

66J122

1) Turn the ignition switch to the “ACC”

position.

66J125

2) Input your PIN.

If the PIN that you input matches the

registered PIN, the power of the audio

system will turn off, and you will be able

to operate the audio system.

NOTE:

• If you input your PIN incorrectly, “----” will

be displayed and the anti-theft function

lock mode is entered. If you enter an

incorrect PIN fewer than 6 times, the

locking time will be for 15 seconds; if you

enter an incorrect PIN more than 6

times, the locking time will be for 15 min-

utes.

• If you forget your PIN and enter a wrong

PIN, you cannot perform any further

operation.

EXAMPLE

5-60

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Troubleshooting

Applicable to every device

Radio

Phenomenon Cause Remedy

Power is not turned on.

(No sound is produced)

Fuse is blown. Contact your authorized SUZUKI dealer.

Connections are not properly made. Contact your authorized SUZUKI dealer.

Phenomenon Cause Remedy

Too much noise. Not tuned correctly to the frequency of a sta-

tion.

Tune correctly to the station frequency.

Stations cannot be selected by

seek tuning.

There is no station with strong radio waves. Select stations by manual tuning.

Phenomenon Cause Remedy

Compact disc cannot be loaded. Another compact disc is already loaded. Eject the compact disc before loading a new

one.

Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth.

Compact disc is heavily scratched or warped. Replace with a compact disc with no scratches.

Sound is bad directly after power

is turned on.

Water droplets may form on the internal lens

when the car is parked in a humid place.

Let dry for about 1 hour with the power on.

5-61

OTHER CONTROLS AND EQUIPMENT

79K21-03E

Error display

This unit has a number of self-diagnostic functions to protect the system.

If a problem should occur, the display shows the type of error. Refer to the table below and take proper measures to correct the problem.

If the problem is corrected, the unit will operate normally.

If an error display not listed above appears, turn off the unit and contact your SUZUKI dealer.

Error display Measures to be taken

CD/CD changer “Mechanical error”.

This error display indicates a mechanical failure in the CD changer

(failure to change or eject a disc).

The mechanism is probably damaged. Contact your authorized

SUZUKI dealer.

CD/CD changer “Focus error”.

The pick-up-focus is not properly functioning during playback due to

damage on the disc or for other reasons.

Check disc for damage.

CD/CD changer “Disc error”.

The CD is inserted upside down or only an eight-centimeter CD

adapter is equipped.

Check disc for correct loading.

Other Controls and Equipment -> Audio Systems (type B) for Your Suzuki Grand Vitara SUV Second Generation (2005-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals