APPEARANCE CARE
Corrosion prevention
It is_ important to take good care of your
vehicle to protect it from corrosion. Listed
below are instructions for how to maintain
your vehicle to prevent corrosion. Please
read and follow these instructions carefully.
Important information about corro-
sion
Common causes of corrosion
1) Accumulation of road salt, dirt moisture
or chemicals in hard-to-reach areas of
the vehicle underbody or frame.
2) Chipping, scratches and any damage to
treated or painted metal surfaces
resulting from minor accidents or abra-
sion by stones and gravel.
Environmental conditions which accel-
erate corrosion
1) Road salt, dust control chemicals, sea
breeze or industrial pollution will all
accelerate the corrosion of metal.
2) High humidity will increase the rate of
corrosion particularly when the tem-
perature range is just above the freez-
ing point.
3) Moisture in certain areas of a vehicle
for an extended period of lime may pro-
mote corrosion even though other body
sections may be completely dry.
8-1
4) High temperatures will cause an accel-
erated rate of corrosion to parts of the
vehicle which are not well-ventilated to
permit quick drying.
This information illustrates the necessity of
keeping your vehicle (particularly the
~nderbody) as clean and dry as possible. It
Is equally important to repair any damage
to the paint or protective coatings as soon
as possible.
How to help prevent corrosion
Wash your vehicle frequently
The_ best way to preserve the finish on your
vehicle and to help avoid corrosion is to
keep it clean with frequent washing.
Wash your vehicle at least once during the
winter and once immediately after the win-
ter.
K<:ep your vehicle, particularly the
underside, as clean and dry as possible.
If you frequently drive on salted roads
your vehicle should be washed at
least
once a month during the winter. If you live
near the ocean, your vehicle should be
washed at least once a month throughout
the year.
For washing instructions, refer to "Vehicle
cleaning" section.
Remove foreign material deposits
Foreign materials such as salts chemicals
road oil or tar, tree sap, bird droppings
and
industnal fall-out may damage the finish of
your vehicle if it is left on painted surfaces.
Remove these types of deposits as quickly
as possible. If these deposits are difficult to
wash off, an additional cleaner may be
required. Check that any cleaner you use
is not harmful to painted surfaces and is
specifically intended for your purposes.
Follow the manufacturer's directions when
using these special cleaners.
Repair finish damage
Carefully examine your vehicle for damage
to the
painted surfaces. Should you find
any
chip~ or scratches in the paint, touch
them up 1mmed1ately to prevent corrosion
from starting. If the chips or scratches have
gone through to the bare metal have a
qualified body shop make the
rep~ir.
Keep passenger and luggage compart-
ments clean
Moisture, dirt or mud can accumulate
under the floor mats and may cause corro-
sion. Occasionally, check under these
mats to ensure that this area is clean and
dry. More
fr~quent checks are necessary if
the vehicle Is used for off-road driving or in
wet weather.
Certain cargos such as chemicals, fertiliz-
ers, cleaners, salts, etc. are extremely cor-
rosive by nature. These products should
be transported in sealed containers. If they
English 
