Get OTHER CONTROLS AND EQUIPMENT -> Manual heating and air conditioning system Guide for Suzuki Jimny SUV Fourth Generation (2018-2026)

OTHER CONTROLS AND EQUIPMENT

Center outlet

Move the knob (

. 78Rsoso2,

to adjust the direct~~rt1fally or horizontally,

o airflow as desired.

5-17

Side outlet

When open ai 1aRsoso

the air flow ~ele~t~~;i:iti~~t regardless of

A CAUTION

Prolonged exposur

the heater or air e to. ~ot air from

result in low t cond,tioner could

vehicle occu ::;iperatu(e burns. All

dren, the eld~rly tsth part,c~larly chil-

needs, individual's wft1e d w,1Jh special

an~ sleeping ind' 'd e ,cate skin,

~amtain sufficient uals1 should

air outlets to ,stance from the

exposure to hot ar~fvent prolonged

ow.

Manual heating and .

cond"t" · air

• ionmg system

Description of controls

Temperature sel t 78RBoso2s

Th' . ec or (1)

is is used to adjust the t emperature

Blowersp d ·

Thi . ee selector (2)

s is used to turn

select blower speed. on the blower and to

Air intake selector (3)

78RB05029

This selector is used to select the following

modes.

FRESH AIR (1 . selected by moving the

When this mo e 'ts_ of (a) in the above

lever to the pos, ,on .

illustration, outside air comes m.

RECIRCULATED AIR (b) b moving the

When this mode !~ sel~t(i) i~ the above

lever to the pos, ,on air is shut out and

illustration, outs1d~ t d This mode is su,t-

inside air is recirc~h~iugh dusty or polluted

able when dnv,nf el or when attempting

air such as m adunnn ~r warm up the inte-

to quickly cool ow

rior.

NOTE: CULATED AIR for an

If you select R:c:~me the air in the vehi-

extended per,o o tan-:inated and the win-

c/e can bec~me ir:nisted. Therefore, yo'!

dows tend oFgRESH AIR whenever poss,-

should select

ble.

OTHER CONTROLS AND EQUIPMENT

USE

WITH-<sJ

(4)

52RS50180

NOTE: WITH" (6)

The mark of "USThe windshield and/or the

To clear fog on . kly, set the air flow

side windows ~::i~Af & DEFROST' or

selector (4~. to d . ·ntake selector (3) to

"DEEFRSHOSA~R'?nTh::e' positioning will clear

"FR : . Id d/or the side wm-

the fogged wmdshteth a~'RECIRCULATED

dows faster than e

AIR".

Air flow selector (4)

52RM50250

This 1s use

. . d to select one of the following

functions.

VENTILATION (c)

· omes

Temperature-controlled air c

the center and side air outlets.

5-18

OTHER CONTROLS AND EQUIPMENT

BI-LEVEL (d)

78RB05031

Temperature-controlled air comes out of

the floor outlets and cooler air comes out

of the center and side outlets. When the

temperature selector (1) is in the fully cold

position or fully hot position, however, the

air from the floor outlets and the air from

the center and side outlets will be the

same temperature.

5-19

HEAT (e)

78RB05032

Temperature-controlled air comes out of

the floor outlets and the side outlets, also

comes out of the windshield defroster out-

lets and also comes slightly out of the side

defroster outlets.

HEAT & DEFROST (f)

78RB05033

Temperature-controlled air comes out of

the floor outlets, the windshield defroster

outlets, the side defroster outlets and the

side outlets.

DEFROST (g)

78RB05034

Temperature-controlled air comes out of

the windshield defroster outlets, the side

defroster outlets and the side outlets.

OTHER CONTROLS AND EQUIPMENT

Air conditioning switch (5)

To turn on the air conditioning system, set

the blower speed selector to a position

other than off and push in "NC" switch.

With this "NC" switch operation, a indica-

tor light will come on when the air condi-

tioning system is working. To turn off the

air conditioning system, push "NC" switch

again.

During operation of the air conditioner, you

may notice slight changes in engine

speed. These changes are normal, the

system is designed so that the compressor

turns on or off to maintain the desired tem-

perature.

Less operation of the compressor results

in better fuel economy.

System operating instructions

Natural ventilation

Select VENTILATION and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to off. Fresh air will flow through

the vehicle during driving.

Forced ventilation

The base settings are the same as for nat-

ural ventilation except you set the blower

speed selector to a position other than off.

Normal heating (using outside air)

Select HEAT and FRESH AIR, the tem-

perature selector to the desired tempera-

ture position and the blower speed selector

to the desired blower speed position. Set-

ting the blower speed selector to a higher

blower speed position increases heating

efficiency.

Quick heating (using recirculated air)

The base settings are the same as for nor-

mal heating except you select RECIRCU-

LATED AIR. If you use this heating method

for an extended period of time, the air in

the vehicle can become contaminated and

the windows can become misty. Therefore,

use this method only for quick heating and

change to the normal heating method as

soon as possible.

5-20

OTHER CONTROLS AND EQUIPMENT

Head cooled/Feet warmed heating

Select BI-LEVEL and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to the desired blower speed posi-

tion. Unless the temperature selector is in

the fully cold position or fully hot position,

the air that comes out of the center and

side outlets will be cooler than the air that

comes out of the floor outlets.

Normal cooling

Set the air flow selector to VENTILATION,

the temperature selector to the desired tem-

perature position and the blower speed

selector to the desired blower speed posi-

tion, and turn on "NG" switch. Setting the

blower speed selector to a higher blower

speed position increases cooling efficiency.

You can switch the air intake selector to

either FRESH AIR or RECIRCULATED

AIR as you desire. Choosing RECIRCU-

LATED AIR increases cooling efficiency.

Quick cooling (using recirculated air)

The base settings are the same as for nor-

mal cooling except you select RECIRCU-

LATED AIR and the highest blower speed.

NOTE:

If you select RECIRCULATED AIR for an

extended period of time, the air in the

vehicle can become contaminated and

the windows tend to get misted. There-

fore, you should select FRESH AIR

whenever possible.

5-21

If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly

while you operate the air conditioner with

the air intake selector at FRESH AIR

and the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air

flow selector position, the temperature

selector to the desired temperature posi-

tion and the blower speed selector to the

desired blower speed position. Also select

FRESH AIR and turn on "NG" switch.

NOTE:

Because the air conditioner dehumidifies

the air, turning it on will help keep the win-

dows clear, even when blowing heated air

using DEFROST or HEAT & DEFROST

functions.

NOTE:

If you need maximum defrosting:

select DEFROST and FRESH AIR,

set the blower speed selector to high,

adjust the temperature selector to the

hot end,

turn on 'WC" switch, and

adjust the side outlets so the air blows

on the side windows.

Maintenance

If you do not use the air conditioner for a

long period, such as during winter, it may

not give the best performance when you

start using it again. To help maintain opti-

mum performance and durability of your air

conditioner, it needs to be run periodically.

Operate the air conditioner at least once a

month for one minute with the engine

idling. This circulates the refrigerant and oil

and helps protect the internal components.

If your air conditioner is equipped with air

filters, clean or replace them as specified

. in "Maintenance schedule" in "INSPEC-

TION AND MAINTENANCE" section.

(For models with air conditioner refrig-

erant R-1234yf)

NOTE:

Your vehicle uses the air conditioning

refrigerant HFO-1234yf, commonly

called R-1234yf. R-1234yf replaced R-

134a for automotive applications. Other

refrigerants are available, but only R-

1234yf should be used in your vehicle.

(For the country of Singapore)

• For repair and parts replacement, have

your vehicle repaired or replaced parts

by an authorized SUZUKI dealer that

has the mechanic qualified with SAE

J2845 for air conditioner of R-1234yf.

OTHER CONTROLS AND EQUIPMENT

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-1234yf only. Do not mix or

replace the R-1234yf with other refrig-

erants.

(For models with air conditioner refrig-

erant R-134a)

NOTE:

Your vehicle uses the air conditioning

refrigerant HFC-134a, commonly called R-

134a. R-134a replaced R-12 around 1993

for automotive applications. Other refriger-

ants are available, including recycled R-12,

but only R-134a should be used in your

vehicle.

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-134a only. Do not mix or

replace the R-134a with other refrig-

erants.

5-22

OTHER CONTROLS AND EQUIPMENT -> Manual heating and air conditioning system for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals