Get SUPPLEMENT Guide for Suzuki Jimny SUV Fourth Generation (2018-2026)

SUPPLEMENT

For Australia ...................................................................... 10-1

For GCC countries ............................................................ 10-4

For Chile and Panama ...................................................... 10-6

For Taiwan ......................................................................... 10-7

For Thailand ....................................................................... 10-11

For Russia and

other countries adopting ERA-GLONASS ...................... 10-12

For Russia .......................................................................... 10-20

SUPPLEMENT

For Australia

Built date

Built date is located on Vehicle Identifica-

tion plate.

"Built date" means - the calendar month

and the year in which the body shell and

power train sub-assemblies are conjoined

and the vehicle is driven or moved from the

production line.

Child restraint

A WARNING

Child restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

child restraints. Under no circum-

stances are they to be used for adult

seat belts, harnesses or for attaching

other items or equipment to the vehi-

cle.

10-1

Installation of child restraint with

top tether anchorage

Some child restraint systems require the

use of a top tether strap. Top tether

anchorage brackets are provided in your

vehicle at the locations shown in the illus-

tration. The number of the top tether

anchorage brackets provided in your vehi-

cle depends on the vehicle specification.

(1)

(1) Anchor fitting

78RB10005

1) Remove the luggage box (1 ).

2) Secure the child restraint on the rear

seat using the procedure described

above for securing a restraint system

that does not require a top tether strap.

3) Hook the top tether strap to the top

tether anchorage bracket and tighten

the top tether strap according to the

instructions provided by the child

restraint system manufacturer. Attach

54Gm the top tether strap to the correspond-

ing top tether anchorage bracket

located on the floor of the rear cargo

area.

4) When routing the top tether strap, pass

the top tether strap as shown in the

illustration. (Refer to "Head restraints"

section for details on how to adjust the

height of head restraint or remove it.)

5) Check that cargo does not interfere

with routing of the top tether strap.

NOTICE

When installing a child restraint

sys-

tem to the rear seat, adjust the front

seat position so that the front seat

does not interfere with the child

restraint system.

SUPPLEMENT

Rear-facing child restraint

58MS030

A WARNING

Do not use a rearward facing child

restraint on a seat protected by an

airbag in front of it.

A WARNING

Do not install a rear-facing child

restraint in the front passenger's

seat. If the passenger's front airbag

inflates, a child in a rear-facing child

restraint could be killed or severely

injured. The back of a rear-facing

child restraint would be too close to

the inflating airbag.

10-2

SUPPLEMENT

If you must use a front-facing child

restraint in the front passenger's seat, be

sure to move the front passenger's seat as

far back as possible. Please refer to "Seat

belts and child restraint systems" in the

"BEFORE DRIVING" section for details on

securing your child.

Airbag symbol meaning

(ill

AIRBAG

72M00150

You may find this label on the sun visor.

A WARNING

NEVER use a rearward facing child

restraint on a seat protected by an

ACTIVE AIRBAG in front of it, DEATH

or SERIOUS INJURY to the CHILD

can occur.

10-3

Seat belt warning

Follow this warning as well as the instruc-

tion for seat belt in this book.

A WARNING

Seat belts are designed to bear upon

the bony structure of the body, and

should be worn low across the front

of the pelvis or the pelvis, chest and

shoulders, as applicable; wearing the

lap section of the belt across the

abdominal area must be avoided.

• Seat belts should be adjusted as

firmly as possible, consistent with

comfort, to provide the protection

for which they have been designed.

A slack belt will greatly reduce the

protection afforded to the wearer.

• Care should be taken to avoid con-

tamination of the webbing with pol-

ishes, oils and chemicals, and

particularly battery acid. Cleaning

may safely be carried out using

mild soap and water. The belt

should be replaced if webbing

becomes frayed, contaminated or

damaged.

(Continued)

A WARNING

(Continued)

• It is essential to replace the entire

assembly after it has been worn in

a severe impact even if damage to

the assembly is not obvious.

Belts should not be worn with

straps twisted.

Each belt assembly must only be

used by one occupant; it is danger-

ous to put a belt around a child

being carried on the occupant's

lap,

In the case where a "Seat Belt Assembly''

incorporates an "Automatic Length Adjust-

ing and Locking

Retractor' or an "Emer-

gency Locking Retractor'.

A WARNING

No modifications or additions

should be made by the user which

will either prevent the seat belt

adjusting devices from operating to

remove slack, or prevent the seat

belt assembly from being adjusted

to remove slack.

Referring to the SEAT BELT

instruction in this book, adjust the

seat belt so that the lap and sash

portions of the Seat Belt Assembly

fit as firmly as possible consistent

with comfort.

SUPPLEMENT for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals