BEFORE DRIVING
Front seat heater (if equipped)
NOTE:
Head restraints (Adjustable type)
It may be necessary to recline the seat-
back to provide enough overhead clear-
ance to remove the head restraint.
Front
EXAMPLE
80J001
52RM20140
Head restraints are designed to help
reduce the risk of neck injuries in the case
of an accident. Adjust the head restraint to
the position which places the center of the
head restraint closest to the top of your
ears. If this is not possible for very tall pas-
sengers, adjust the head restraint as high
as possible.
With the ignition switch is in “ON” position
or the ignition mode is “ON”, push in one or
both of the seat heater switch(es) to warm
the corresponding seat(s). The indicator
light in the switch will also come on. To turn
off the seat heater, push in the switch
again. The indicator light in the switch will
go off.
75RM004
To raise the front head restraint, pull
upward the head restraint until it clicks. To
lower the head restraint, push down the
head restraint while holding in the lock
lever. If a head restraint must be removed
(for cleaning, replacement, etc.), push in
the lock lever and pull the head restraint all
the way out.
WARNING
• Never drive the vehicle with the
head restraints removed.
• Do not attempt to adjust the head
restraint while driving.
2-24
52RM0-01E
English 
