OTHER CONTROLS AND EQUIPMENT
Rear
EXAMPLE
(C)
(B)
(1)
(A)
(2)
EXAMPLE
EXAMPLE
68LM546
62J161
58MST0511
2) Remove the cover (C) by using a jack
handle (A) covered with a soft cloth as
shown in the illustration.
4) To tighten the towing hook (1), turn it
clockwise by using a wheel brace (B)
until the hook (1) is securely installed.
The frame hook (2) is provided on the rear
of the vehicle for use in emergency situa-
tions and sea shipping purposes only.
NOTICE
EXAMPLE
NOTICE
When you use the towing hook (1),
avoid the driving that gives signifi-
cant physical shock on hook. Such
operation can damage the hook, or
the vehicle body.
When you use the frame hook (2),
avoid the driving that gives signifi-
cant physical shock on hook. Such
operation can damage the hook, the
vehicle body or the drive system.
Do not sudden accelerate.
• Do not sudden accelerate.
• Do not tow the vehicle heavier than
your vehicle.
To remove the towing hook (1), reverse the
procedure used to install the towing hook.
(1)
To tow your vehicle on the road or highway,
follow the instruction of “Towing” in “EMER-
GENCY SERVICE” section.
63J120
3) Install the towing hook (1) by hand.
5-53
58MS0-14E
English 
