BEFORE DRIVING
To switch to the setting mode
Information switch
(if equipped)
Warning and indicator lights
1) Push and hold the information switch
(1) when the vehicle is stationary.
2) After the display of setting mode is
shown, select the setting item that you
want to change by turning the indicator
selector knob (2) left or right. Refer to
“Setting mode” in this section for
details.
NOTE:
If warning and indicator lights blink or
come on, the corresponding messages
may be shown on the information display.
You can use the information switch to
switch the display indication when the igni-
tion switch is in “ON” position or the igni-
tion mode is ON and the vehicle is
stationary.
Brake system warning light
NOTE:
EXAMPLE
If you switch to the setting mode while
either of the following items is shown on the
information display, the current value will be
reset. If you do not want to reset its value,
push the indicator selector knob (2) quickly
beforehand and switch to the other item.
• Average fuel consumption
82K170
• Average speed (if equipped)
Three different types of operations exist
depending on the vehicle’s specification.
• Driving time (if equipped)
• Total idling stop time and total idling stop
fuel saved (if equipped)
• The light comes on briefly when the igni-
tion switch is turned to “ON” position or
the engine switch is pressed to change
the ignition mode to ON.
• The light comes on when the parking
brake is engaged with the ignition switch
in “ON” position or the ignition mode is
ON.
(1)
(2)
To exit the setting mode
52R31310
1) Push the indicator selector knob (2)
and select “Back”.
(1) Information switch
(2) Indicator selector knob
2) Push the information switch (1) quickly.
NOTE:
You can exit the setting mode by either of
the following operations:
• The light comes on under either or both
of above two conditions.
• Turn the ignition switch to “ACC” or
“LOCK” position.
• Press the engine switch to change the
ignition mode to ACC or LOCK (OFF).
• Start driving your vehicle.
The light also comes on when the fluid in
the brake fluid reservoir falls below the
specified level.
2-80
English 
