OTHER CONTROLS AND EQUIPMENT
NOTE:
Accessory socket
The light will automatically be turned off to
prevent the lead-acid battery from dis-
charging when after 15 minutes of the tail-
gate open.
NOTICE
• Use of inappropriate electrical
accessories can cause damage to
your vehicle’s electrical system.
Check that any electrical accesso-
ries you use are designed to plug
into this type of socket.
Center console
EXAMPLE
EXAMPLE
• When the ignition switch is in
“LOCK” position or the ignition
mode is LOCK (OFF) during using
the accessory socket, the following
accidents may occur;
– the audio or navigation system
does not turn off.
– the keyless entry system does
not work, etc.
If they occur, disconnect the item
from the accessory socket and
check whether the electrical equip-
ments work properly.
If the problem persists, ask an
authorized SUZUKI dealer to have
the system inspected.
57RK057
The accessory socket will work when the
ignition switch is in “ACC” or “ON” position,
or the ignition mode is ACC or ON.
This socket can be used to provide 12 volt/
120 watt/10 ampere power for electrical
accessories. Check that the rubber cap
remains on the socket when the socket is
not in use.
52RM50080
NOTE:
The number of doors involved in the light-
ing operation of the interior light depends
on the vehicle specification. If there is a
switch (rubber protrusion) at the door
opening as shown, the door is involved in
the lighting operation. The tailgate is also
involved in this operation even without the
rubber protrusion.
5-6
English 
